Your cart is empty.
Your cart is empty.Hone in on performance. The OEMTOOLS 25041 Adjustable Engine Cylinder Hone Deglazer efficiently removes the carbon, rust, and heat glaze deposits on cylinder bores that can cause low cylinder pressure and affect engine start up. This cylinder bore honing tool features powerful steel arm design that keeps the abrasive stones aligned correctly. The rigid hone arms have an adjustable 2 inch to 7 inch range (51 millimeter to 128 millimeter) compatible with many vehicles. The spring tension adjusting nut delivers positive cutting action at all speeds and smooth glaze-breaking performance. Plus, it fits right in with the equipment you already have in your shop or garage. This easy to operate cylinder hone set is compatible with any standard 1/4 inch to 1/2 inch drill and is ready to use right out of the package, with replaceable 4 inch medium grit stones included. Simply attach the power hone to your drill, lubricate with any engine honing oil and run at low speeds moving up and down the cylinder walls. Whether you’re an experienced technician or a home mechanic honing your skills, you can rely on the OEMTOOLS 25041 Adjustable Engine Cylinder Hone Deglazer for the clean, quick performance you need.
Norris Huddleston
Reviewed in the United States on February 20, 2025
Smooth side to my chainsaw cylinder
pschlosser
Reviewed in the United States on December 31, 2024
This is not a delicate tool, but it isn't bullet proof, either. As it should be, since it hones tiny little cylinders.Removing the tool from the cylinder while it's still spinning on the drill can damage it. Be gentle with it, and it will last.The last of these I ordered just arrived broken. The blister packaging shows signs of crushing. It was shipped in a padded envelope, which won't offer much protection against boxes and flat mail piled onto it during shipping. I think Amazon fulfillment is responsible for this damage, not the maker of the product.edit: amazon has great service, and the return policy allows for a replacement. it arrived, today... in a padded envelope. but it wasn't crushed and broken, this time! so your luck may vary.I can find nothing on the packaging that stipulates the item it made in the USA. Sold/marketed in the USA, sure. And I have several of their other tools, and they are top notch. Also, they have a lifetime warranty. Knowing this, I don't think it matters where it's made.
R. Jordan
Reviewed in the United States on June 19, 2023
This hone looked like decent quality and fit the fairly large caliper bore it was purchased for. However the part that chucks into a drill came off the spring shaft after only a couple of cycles of honing. I tried fitting it back together and even re-crimping that piece on but it won't stay; it twists off as soon as you try to use it. This tool is useless. I'll find a Lisle instead.
Marc H.
Reviewed in the United States on January 3, 2022
Doesn't get much better than this hone for the money. I used it on my Honda Eu 2000 I and the cylinder looks like brand new now... Highly recommend this hone. Worked much better than my ball hone I am used to using.
eric meunier
Reviewed in Canada on September 24, 2021
J avais des raillure dans un canon réparé
D
Reviewed in Canada on May 8, 2019
I can't seem to add video to demonstrate this garbage, but the item is pure junk. The adjustment mechanism is pathetic and if I used the hone on a cylinder it would damage the cylinder because the pressure it puts on the arms is uneven and crooked. Apparently the item is made in USA so it's not only China that is selling us garbage. "Lifetime warranty" is not worth the cost to mail the item back to the company. I will remember the OEM Tools brand to avoid for future tool purchases.
Nolan K
Reviewed in the United States on November 29, 2019
worked like a champ
DG
Reviewed in the United States on February 2, 2018
It worked like a charm on a stainless steel cylinder on an oil less air compressor. Stones are on the fine side, took quite a while to clean up some deep scratches. Should go a lot faster on a normal cast iron cylinder. Made in the U.S.A. and you can't beat the price. Have plenty of meat left on the stones even after a rather long stainless torture test!
Texas M.
Reviewed in Canada on December 24, 2018
It came ok but did not work very well at all. pretty dissapointed..
devo
Reviewed in the United States on May 17, 2015
Works fine, but the plastic piece that protects the arms where they join up is so large that it doesn't allow you to go deep into a tube that you are trying to hone out. May work OK for the engine cylinders it was intended for if you don't have to go too deep.
C
Reviewed in the United States on March 14, 2014
I liked this tool over others in this size range for the "S" arms allowed for greater bore range. For this tool, 13/16" - 2 1/4". Tool worked as required. Instructions for use were on the back of packaging. List of "cautions" also printed on back of packaging. With reference to bad review because of broken stone. Do not know all facts, but there are ways to break the tool, so go to YouTube and watch a few videos before use.
Recommended Products
