Your cart is empty.
Your cart is empty.Trent L McCallister
Reviewed in the United States on January 3, 2024
The media could not be loaded.
Tyler S.
Reviewed in the United States on August 9, 2023
I had to write a review. I purchased this bar for my mower almost 3+ years ago. I was skeptical but now I have no doubt these are good LED's. It is definitely chinese but well put together and sturdy furst off. They're extremely bright. If pointed toward you you have to look away. I was amazed for the money at how bright they actually are. They've performed excellent this entire time in the Southeast GA heat and humidity. I keep my mower under a shelter but it stays wet more than dry when in use. I've had zero moisture under the lens and it gets washed after almost every use. Seen at least 3 rain storms. What I thought for sure would kill it was the vibration from my mower but it hasn't missed a link. Instructions are fairly straight forward which the harness makes your install straight forward so you don't really need them. The stainless hardware has been pretty strong too. Haven't had to retorque anything. The clear plastic lens has started to yellow very slightly as to be expected after the torture it has endured. That's my only quarrel. If you're looking for a good cheap light bar get this one. It's worth every penny. Sorry for the dirty mower photo. She's got to be cleaned. Grass has to be cut every 4 days due to all the rain so I haven't had time.
dominic
Reviewed in Canada on August 9, 2023
Ok1- after I read all the comments, I decided to make my own cable. 12awg for car instead of that 16.With 12 I tested it on for 1 hour under 30 degree sun light and no cable became warm.2- I also bought a better relay brand.3-I did open both side and sealed the rubber with high temperature silicone. Then I sealed the front glasses 4 sides. Mine will not take water in its now a fact.The cable to the switch is short but I manage to have enough even with my batterie connector on the left.I also installed a better switch.Mine is hidden under the grill. I made sire all was leveled before I fix it cause the screw to adjust the light hight angle are is a bad place.It is brighy enought. Is it 450 watt lol I dont think soMine is 3 inches ressens behind therefore less bright on sides and still it is a lot.It is very low on my grand cherokee lower than the fog light and its a good thing.In winter I will probable install an amber plexiglass color on it or the snow réflexion would be too much white.I am really happy for now. But my trust comes from all I did to make it better.
Ray McMurray
Reviewed in the United Arab Emirates on March 5, 2023
After reading mixed reviews, I was sceptical, but is made very well and is super bright. There is a good balance of distance and a much wider side to side spread than I thought it would have. I am really very impressed with this.
javier T
Reviewed in Mexico on December 22, 2023
La pusieron en la burrera de la camioneta, la iluminación es blanca, la zona que ilumina es muy amplia. Hasta ahora funciona muy bien
Lap
Reviewed in Australia on November 30, 2023
To be fair, if look details of the product pictures. It is what it is. However, who will design a roof rack light without weather proof connector?
Lisa Perrott
Reviewed in Canada on October 29, 2023
I enjoy all the products I have purchased from this company. This particular light is only intended for offroad use and I can see why. Very bright in all modes.
Dana P.
Reviewed in the United States on April 28, 2023
My friends will tell you i have a light fetish. But after caving with 3 other friends 20 years ago and getting down to 2 working lights, thatll happen. I had a nilight led lightbar the same size on my previous suv and when i bought a new one last month, putting another nilight light bar on it was a no brainer. And the fact that they now have a white and amber lightbar, taking the lightbar off my old suv and putting it on the new one wasnt even an option.These arent hard to install. The only issue was with my car, the firewall pass thru is on the passenger side behind the glove box and the battery is in the very front of the drivers side of the engine compartment so i had to add about a foot to the 2 battery wires. But the switch wire was long enough to easily go from behind the glove box to next to the steering wheel. The light is nice and bright and the ability to have white, amber or both is great. Im even trying to get my boss to agree to put the 4inch square ones on the company vans for the flashing modes (they are technically considered emergency vehicles).Ive had nilight brand led lights now on my last three vehicles, as well as my riding lawnmower and my 2 stage snowblower. And ive never been disappointed with any nilight product ive purchased.update: after 3 months I noticed moisture inside the light bar on one side. I contacted Amazon to replace the light bar and was told I am outside the 30 day replacement and so what I need to do is return the light bar kit...the entire light bar kit...for a refund. which means, the wiring harnass too. you know, the 2 hours I spent taking off dashboard pieces and hood side fire wall covers to get it thru the firewall and the crimps and heatshrink to get it all connected, yeah undo all of that and then in a week when i get the replacement i'd inevitably order, go thru the entire process all over again. because just exchanging the faulty light bar would be too difficult, right? i'll replace the light bar with another nilight light bar because i do like nilight products and this light bar, but i won't order a replacement from amazon. because thinking people need to unro then redo all the work to run the wiring harnass, which works perfectly fine, is the absolute dumbest solution to the problem i could think of.
Recommended Products