Your cart is empty.
Your cart is empty.This special tool enabling smooth and precise squaring of the corners in the angle of 90°, after the mortise has been roughed out by hand or with a machine. The Forged polished blade is made of traditional Cr-Mn steel and is heat treated to 59 HRc. The Ergonomic handle from hard and hefty hornbeam wood is strong enough to withstand heavy blows with a mallet. Combination of the stained hornbeam handle, brass ferrule and imporved grinding of the blade creates unique design of the tool. Blade length: 120 mm Blade width: 10 mm Total length: 265 mm Handle size: 145 mm x 37 mm
Persson Anders
Reviewed in Sweden on February 6, 2025
I received this (a bit expensive) chisel wrongly ground, from factory.One of the sides is ground at an incorrect angle at has imperfections.Since a 90 degree chisel is inherently difficult to grind at the corner, it would take considerable efforts to correct this, so I returned it.I am very surprised by this, since Narex supposedly is a "quality brand" and will buy from other manufacturers instead in the future.It is ok (and understood) that a final edge is put on tools by the purchaser, but this was so wrongly ground that it would take hours to correct.
Eric
Reviewed in the United States on March 18, 2024
I actually used it right out of the box on some pine. It worked great .then IHoned it and finished the mortises I was working on it’s a keeperP.s new chisels should always be properly honed before use .Happy customer
JF
Reviewed in France on December 15, 2022
Reçu dans un emballage Legé. Conforme aux descriptions et d'équerre.
ehansen
Reviewed in the United States on November 6, 2021
Narex makes an affordable and solid line of chisels and this corner chisel is no exception. The handle is comfortable and will develop nicely over the lifetime of use this chisel will see. You could use this straight out of the box but your performance will increase with an initial tune up (sharpening/flattening).You can spend more and you can spend less but spending money on Narex is always just right.
Alex V.
Reviewed in the United States on October 13, 2020
Really handy chisel I reach for a lot more than I'd expected. Wasn't terrible to sharpen if you're well set up, and seems to hold an edge fairly well. I'm using it to fix up corners, of course, not actually chopping out much wood with it, which helps.
Gianni
Reviewed in Italy on January 24, 2020
Ho scalpelli di altre marche alcuni discreti, altri meno ma per ora mi bastano. Incuriosito la forma di questo scalpello utile per rettificare gli angoli delle mortase e gli scassi per le cerniere a libro, ho deciso di acquistarlo. A farlo ha anche contribuito la marca della quale ho letto molte recensioni assai positive. Non l'ho ancora usato, ma da un primo esame risulta robusto, ben affilato e dal giusto peso per l'utilizzo a mano senza mazzuolo.. Dopo averlo adoperato per un po' di tempo vedrò se confermare o meno questa prima impressione positiva
Sergia
Reviewed in the United States on September 8, 2019
This chisel is great for the price. I ordered it for some custom lights i am fabricating. It smoothly cut right through the hard wood. Handle is comfortable and when hit with a hammer it doesn't even mark it.
salex
Reviewed in Australia on August 5, 2019
High quality finish, high grade steel, best workmanship. What more do you want?
Steve Excell
Reviewed in the United States on December 22, 2018
This Narex corner chisel was well forged and machined. It was sharp right out of the box. Great quality plus a great price.
Bruce Rasmussen
Reviewed in the United States on April 17, 2017
The Narex brand of chisels seems to sharpen well. You will need to do some work on them when they arrive, but they seem to be a good chisel considering the price. Be prepared to flatten the back, hone the bevel, and apply the secondary bevel. When this is done, they generally respond well to use. Time will tell if these will hold up to significant use, but they show promise.This chisel in particular is difficult to sharpen. Be prepared to work at it carefully if you've never sharpened a corner chisel.
Marcio C.
Reviewed in the United States on September 30, 2016
Formidable tool. Just what I expected for the price. Sturdy, very well machined. Needs a little polish to come to a mirror shine. Satisfied.
Christian W.
Reviewed in Germany on January 24, 2016
Wer so etwas benötigt oder will, kauf sicher kein schlechtes Produkt.Ich sebst weiss noch nicht, ob ich denn Stechbeitel mag oder nicht. Bisher greif ich eher noch zum klassischen Stechbeitel und forme meine Ecken, da der 90° Schneifasenwinkel aufwendiger zum nachschärfen ist.Dennoch , die Verarbeitung ist tadellos und wertig und das Preis Leistungsverhältnis stimmt.Kaufempfehlung für denjenigen, der weiss was er da kauft und es BRAUCHT.
BOM
Reviewed in the United States on February 14, 2015
It's hard to find a corner chisel for some reason. This is a pretty good one. It came nicely sharpened and cuts pretty well. My only gripe is that one cutting edge sits proud of the other, meaning that if you set the chisel on its tip on a flat surface, one half of the cutting end is higher than the other. This doesn't really affect things as far as what I use it for, but it's worth noting. I'm hoping that my sharpening service can fix this when they eventually sharpen the chisel.
Recommended Products
