Your cart is empty.
Your cart is empty.4.0 out of 5 stars
- #10,408 in Musical Instruments (See Top 100 in Musical Instruments)
- #26 in Guitar Pickups & Pickup Covers
Brand New
Easy To Use And Carry
For Acoustic Guitar And Most Of Classical Guitar
The Piezo Position Is Soft Style
Package Included:
1Piece Piezo
william Whynacht
Reviewed in Canada on February 25, 2025
Fit perfectly, simple to install and worked well
karen
Reviewed in the United States on January 18, 2025
It works good,the action was so high on the guitar i had to take the saddle down a half mile which doesnt work with the open piezo pickup that is in an ovation guitar,this pichup is a good addition if you need to sand the saddle down to lower the action,just unplug the stock pickup and plug new one in,it too long but thats not an issue,push it up thru the bottom and let the excess hang down thru the hole reinstall the saddle,the only reason i diddnt give it 5 stars is the volumn needs to be up higher on the amp and guitar than before but it sounds good
K.C.
Reviewed in the United States on March 27, 2024
Works well.
Kurt M.
Reviewed in the United States on March 13, 2024
I installed this directly under the metal bridge and used an end pin jack with it on my jazz copy fretless 5 string bass with round wound strings. I used it passive and the sound is HUGE! I like it better than the magnetic pick ups:) Been building/converting basses for 50 years now and never tried this before. Very nice piezo!
Lorenzo
Reviewed in Italy on December 27, 2024
Ok
Jason P.
Reviewed in the United States on October 8, 2024
I broke the pick up in my Ovation Elite CE48, and bought this as a replacement. It didn't fit on to the bridge prefect, but it was close enough. Plugged it in and it sounds as good as the original.
ANTONIO G.
Reviewed in Mexico on April 26, 2024
Aun no tengo una foto pues tengo que hacer algunos ajustes para que quede bien instalado bajo el sillín de mi guitarra.
Danny Thomas
Reviewed in the United Kingdom on April 11, 2024
Good quality, easy to install, great sound
Jolene M.
Reviewed in the United States on July 5, 2023
So my piezo transducer in my Alvarez died and I had a gig on July 4th so I overnighter this to replace it. When I took it out if the package I saw the wire that was soldered to the bar was not connected and the solder had failed. Normally at this point I would have packaged it up and sent it back but it was July 3rd and no one had one locally. I attempted to resolder it and basically destroyed it. I threw it in the trash. Out the money and still have a non functional guitar. I borrowed a guitar for the gig and will take my Alvarez to a tech to get the transducer replaced. One other thing when comparing the solder compared to the solder on my original piezo it was apparent that they used a tiny bit of solder on this one compared to the original. I don't think the original Alvarez would have came loose had I drive over it with a car. You get what you pay for lesson learned.
雅
Reviewed in Japan on July 4, 2023
普通に使えました。もうちょっと安けりゃイイな。
Dean Thomas
Reviewed in the United States on February 6, 2023
I see some people saying they get no volume from their E and B String.There can be 2 issues that cause it.If the pocket in your saddle isn't level and smooth it will cause issue where there is a low spot.The other issue is caused be the end of the wire coming to a point. If that is to close to where your E string lays on the bridge you will lose volume.I install all piezo by drilling my saddle at the high E Don't drill into the floor but drill even with the floor at an angle so you can push the point of the wire back into the body. You will get even volume across all strings this way
Adrian J.
Reviewed in the United States on November 27, 2023
I was trying to get the action down on a cheap ovation guitar I bought used. if you have ever messed with an ovation guitar, they have a funky saddle and piezo setup. I pulled the saddle and dropped in another one from amazon that I could sand down a bit and put this piezo under the new saddle. It plugged into the ovation electronics just like the original one did and works great. Happy with the purchase.
C. bessette
Reviewed in the United States on September 5, 2017
Used this to replace an existing piezo pickup that had broken. The piezo element is mounted in a rectangular metal tray that seems to protect it from bending. Incidentally I had to widen the slot in the saddle slot so that it would fit. Between my dremel tool, chisels, files,etc. I got the slot wide enough and long enough to fit. The existing broken one was a shorter, rounder shape. (Something to keep in mind if you are replacing an existing pickup)I had to cut the 1/8" plug off the end and solder the pickup wire directly to my preamp where the old pickup was connected, but no other modifications were necessary. The sound is great, Nice and crisp highs, and solid bass. There seems to be a separate piezo piece directly under each string and the E,A,D string end had more "thump" than the G,B,E end, as if the pickup was designed for the frequency range of the strings.
Recommended Products