Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #4,176 in Musical Instruments (See Top 100 in Musical Instruments)
- #12 in Electric Guitar Bridges & Bridge Parts
利用者
Reviewed in Japan on February 13, 2025
無事装着出来ました！
利用者
Reviewed in Japan on February 13, 2025
無事装着出来ました！
Philippe Lenzen
Reviewed in Belgium on July 30, 2024
Belle finition
Philippe Lenzen
Reviewed in Belgium on July 30, 2024
Belle finition
Luthiers apprentice
Reviewed in the United States on July 18, 2024
I ordered this specific combination because I could find the correct bridge saddles by itself. This fit so well that I only used the bridge saddle. The 74mm spacing and height adjust ment screws were dead on.I did have to do some filing on the the G and B saddles, after installation. I was getting string buzz in saddle slots. A few passes with some nut files allowed the strings to sit snuggly enough where the buzz disappeared.
Luthiers apprentice
Reviewed in the United States on July 18, 2024
I ordered this specific combination because I could find the correct bridge saddles by itself. This fit so well that I only used the bridge saddle. The 74mm spacing and height adjust ment screws were dead on.I did have to do some filing on the the G and B saddles, after installation. I was getting string buzz in saddle slots. A few passes with some nut files allowed the strings to sit snuggly enough where the buzz disappeared.
Guillaume lannen
Reviewed in the United States on May 29, 2024
rebuilt my les paul and wanted to stay away from standard gold fixtures. at first i was a little skeptical due to price but the finish is amazing, quality was spot on, and looks killer
Guillaume lannen
Reviewed in the United States on May 29, 2024
rebuilt my les paul and wanted to stay away from standard gold fixtures. at first i was a little skeptical due to price but the finish is amazing, quality was spot on, and looks killer
Edgar Jakobs
Reviewed in Germany on December 9, 2024
Alles Bestens! In Schwarz wollte ich es immer schon haben. Danke!
Edgar Jakobs
Reviewed in Germany on December 9, 2024
Alles Bestens! In Schwarz wollte ich es immer schon haben. Danke!
Ed and Sabine Didur
Reviewed in Canada on December 15, 2024
Put this on a LTD Viper 256 and it worked well. Better playability than the stock bridge. A good ABR bridge for Asian import electric guitars for $20 Cdn what value and delivered to my door! Just mount with screws facing the pickups for maximum adjustability and your set.
Ed and Sabine Didur
Reviewed in Canada on December 15, 2024
Put this on a LTD Viper 256 and it worked well. Better playability than the stock bridge. A good ABR bridge for Asian import electric guitars for $20 Cdn what value and delivered to my door! Just mount with screws facing the pickups for maximum adjustability and your set.
Roger DeLano
Reviewed in the United States on October 30, 2024
Worked out great for what i was doing . intonation was perfect .may not be top of the line but it works very well for the price i paid
Roger DeLano
Reviewed in the United States on October 30, 2024
Worked out great for what i was doing . intonation was perfect .may not be top of the line but it works very well for the price i paid
TruXterTechCom
Reviewed in the United States on October 16, 2024
Fitment is on the mark. Not some weird size. Works great.Holds tune fine too.
TruXterTechCom
Reviewed in the United States on October 16, 2024
Fitment is on the mark. Not some weird size. Works great.Holds tune fine too.
Cliente de
Reviewed in Mexico on January 30, 2024
Se recomienda al 100
Cliente de
Reviewed in Mexico on January 30, 2024
Se recomienda al 100
Old lady, Old man
Reviewed in the United States on November 7, 2023
Perfect fit, great price and higher quality than the stock unit on my knockoff semihollow-body 335.
Old lady, Old man
Reviewed in the United States on November 7, 2023
Perfect fit, great price and higher quality than the stock unit on my knockoff semihollow-body 335.
Nick Camilo
Reviewed in the United States on October 14, 2023
The bridge, more specifically, the setting screws on the saddle, are loose and raddle loudly no matter what.Adjusted my truss and action multiple times trying to fix the buzz before I realized it was coming from the bridge. There's a retaining wire on the saddle that lays across the top of the setting screws to keep them held downward in place, it does not.The setting screws are left to jingle around and cause loud, unfixable buzz on every string. No amount of fiddling could correct it, despite hours of attempted solutions.Tried to budget shop, got what I paid for. In the market for a new bridge again.
Nick Camilo
Reviewed in the United States on October 14, 2023
The bridge, more specifically, the setting screws on the saddle, are loose and raddle loudly no matter what.Adjusted my truss and action multiple times trying to fix the buzz before I realized it was coming from the bridge. There's a retaining wire on the saddle that lays across the top of the setting screws to keep them held downward in place, it does not.The setting screws are left to jingle around and cause loud, unfixable buzz on every string. No amount of fiddling could correct it, despite hours of attempted solutions.Tried to budget shop, got what I paid for. In the market for a new bridge again.
Sue S
Reviewed in the United States on August 24, 2020
Bought it for a tail piece replacement. Well made. Better than the original. Not good to replace only original bridge. You will need to replace everything. Sizing is a bit different. But well made hardware.
Sue S
Reviewed in the United States on August 24, 2020
Bought it for a tail piece replacement. Well made. Better than the original. Not good to replace only original bridge. You will need to replace everything. Sizing is a bit different. But well made hardware.
The_Owl
Reviewed in the United States on December 8, 2019
Update: 2nd bridge & tail-piece.I returned the 1st bridge & tail tail-piece, but decided to take a chance on a 2nd. The 2nd bridge & tail-piece are keepers. They are not 10s, but maybe 8 out of 10. The tail-piece still has minor pitting, but is about 3x as good as the 1st one I ordered. It is worth keeping. The bridge is not pitted much at all and works well (I can turn the six screws by hand, and it fits the posts when installed on the guitar).The 1st picture above is the original (returned) item. The 2nd+ pictures are of the newer tail-piece and bridge. Note the improved packaging. I have included pictures of the tail-piece on a MIC Epiphone Les Paul Unlimited I'm rehabbing. I purchased the Kmise gold knobs, and Kmise gold humbuckers. You can see the bridge+tail-piece+Kmise humbuckers work quite well together, although the Kmise humbuckers might be just a tad lighter in gold color. None-the-less... the result is pretty good.I have just purchased a 3rd instance of the bridge+tail-piece as a backup for the next guitar. I will report on that one also when it comes in. If it is as good as this one (i.e. 8 out of 10)... I will keep it. Otherwise, I will consider this 2nd one the anomaly, and send the 3rd one back. I'll let you know!(1st bridge & tail-piece):I will be most likely be returning this product. I will research as to whether to try it again, or not (by other reports on finish for this and other products). Below is my breakdown on each component.The tailpiece (with picture attached for reference):a) The finish/plating on the tail piece is severely pitted.b) The finish/plating on the tail piece is also scratched.c) The color of the "gold" is acceptable. Not that awful REALLY gold gold.d) The stud screws fit into my existing China Les Paul, but were also pitted.The Bridge: (no picture supplied):a) The finish/plating on the bridge is acceptable (good enough to keep).b) I could turn the screws by hand and nothing seemed to bind and nothing was strippedc) The bridge holes were of correct size for the studs supplied.d) The bridge studs seemed to have better plating that the tailpiece studs.e) The bridge studs fit (I could screw them in) my 2005 Chinese Les Paul.Summary:The finish on the bridge was acceptable. If I were buying the bridge alone -- I would keep it.The finish on the tailpiece was not acceptable, and I was very disappointed.Gold Musiclily ABR-1 Style Tune-o-matic Bridge Tailpiece Set for Gibson Les Paul will be returned.
The_Owl
Reviewed in the United States on December 8, 2019
Update: 2nd bridge & tail-piece.I returned the 1st bridge & tail tail-piece, but decided to take a chance on a 2nd. The 2nd bridge & tail-piece are keepers. They are not 10s, but maybe 8 out of 10. The tail-piece still has minor pitting, but is about 3x as good as the 1st one I ordered. It is worth keeping. The bridge is not pitted much at all and works well (I can turn the six screws by hand, and it fits the posts when installed on the guitar).The 1st picture above is the original (returned) item. The 2nd+ pictures are of the newer tail-piece and bridge. Note the improved packaging. I have included pictures of the tail-piece on a MIC Epiphone Les Paul Unlimited I'm rehabbing. I purchased the Kmise gold knobs, and Kmise gold humbuckers. You can see the bridge+tail-piece+Kmise humbuckers work quite well together, although the Kmise humbuckers might be just a tad lighter in gold color. None-the-less... the result is pretty good.I have just purchased a 3rd instance of the bridge+tail-piece as a backup for the next guitar. I will report on that one also when it comes in. If it is as good as this one (i.e. 8 out of 10)... I will keep it. Otherwise, I will consider this 2nd one the anomaly, and send the 3rd one back. I'll let you know!(1st bridge & tail-piece):I will be most likely be returning this product. I will research as to whether to try it again, or not (by other reports on finish for this and other products). Below is my breakdown on each component.The tailpiece (with picture attached for reference):a) The finish/plating on the tail piece is severely pitted.b) The finish/plating on the tail piece is also scratched.c) The color of the "gold" is acceptable. Not that awful REALLY gold gold.d) The stud screws fit into my existing China Les Paul, but were also pitted.The Bridge: (no picture supplied):a) The finish/plating on the bridge is acceptable (good enough to keep).b) I could turn the screws by hand and nothing seemed to bind and nothing was strippedc) The bridge holes were of correct size for the studs supplied.d) The bridge studs seemed to have better plating that the tailpiece studs.e) The bridge studs fit (I could screw them in) my 2005 Chinese Les Paul.Summary:The finish on the bridge was acceptable. If I were buying the bridge alone -- I would keep it.The finish on the tailpiece was not acceptable, and I was very disappointed.Gold Musiclily ABR-1 Style Tune-o-matic Bridge Tailpiece Set for Gibson Les Paul will be returned.
Recommended Products
