Your cart is empty.
Your cart is empty.Product Description
Applications:
- Automotive sensor and manifolds
- Microelectronics
- Insulating circuit boards
- Etching
- Liquid crystal
- High temperature powder coating
- Electrical circuit
- Space flight
- Laser
- Aviation
MS WGO High Temperature Heat Resistant Tape
Specification:
- Substrate material: Polyimide polymers film
- Glue Type: Silicone
- Substrate material thickness: 0.025mm
- Thickness with adhesive: 0.05mm
- Adhesive strength: 4.5N/25MM
- Tensile Strength: 115N/25mm
- Elongation: 50 %
- Temperature Range:-73°C – 260°C (-99°F - 500°F)
- Breakdown voltage:Min 4KV
High Temperature Heat Resistant Tape
- Leaves no residues after you peel them off
- High temperature application (over 450 F)
- They always holds tight throughout the tape’s rated temperature range
Leaves no residues
- No brittle after heating
- Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
- Used in various electrical/electronic product manufacturing processes due to its' excellent heat resistance and electrical insulation.
- Short period Heat Resistance:260℃
- Long period Heat Resistance:220℃
Suitable for a variety of scenarios：
liquid crystal
Microelectronics
Space flight
Electrical equipment
Brandon
Reviewed in the United States on March 3, 2025
Very affordable kapton tape. Sticks well. Might be a bit larger if you're working with smaller pcbs but you can always just cut the size you need.
Oh Blah Dee
Reviewed in the United States on January 22, 2025
I used this to tape down some temperature probes to monitor some computer hardware, so nothing crazy hot. The tape is easy to peel and sticky enough to get the job done, and it's a good size for larger electronics. This isn't strong enough to really hold something down, though.
Frankie
Reviewed in the United States on September 24, 2024
Non conductive so I can use anywhere! Love that! Decently sticky!Has a funny smell!Perfect to use as a solder mask if in a pinch!
FishMan
Reviewed in the United States on August 20, 2024
What can I say, everyone needs this in order not to damage other components on the circuit board. It's easier to peel off of the roll, easy to apply and remove from the circuit board, durable and holds up to hot air temps, doesn't leave residue on the circuit board, definitely worth the money.Also, I just love that clear bronze color. I used to work at as a bench technician, but now I just repair small things at home when need be. This tape is super nostalgic lol.
Living Luxe
Reviewed in the United States on December 8, 2024
Never left any residue and held well even after multiple presses and extended times. Must have item for making custom tees and excellent price on Amazon.
Christopher Balko
Reviewed in the United States on November 3, 2024
Works great and I'm happy with the purchase.
Leo
Reviewed in the United States on January 27, 2024
It's good tape and it feels like it works well once you get it to stick to itself. It's not so great at sticking to insulated wire (a printer heater cartridge and thermistor wire) but I wrapped it around. It does well for it's application and for that I am satisfied. Oh, it stinks by the way and probably best to first open the package in a well ventilated area.
Whathavewehere
Reviewed in the United States on July 16, 2023
Real kapton tape is very expensive stuff. It's used on space-craft and in avionics and because of that the original manufacturer can charge very hefty prices (high double digits) per roll. I suppose if I were using it for something that human life or millions of dollars depended on I'd opt for the name brand.That said this worked just fine for my purpose at a fraction of the cost. I used it to insulate the pin 3 connector on an enterprise SATA hard drive from power. The reason for this being I bought some cheap used enterprise hard drives that have a feature (power disable) that when power is supplied on a certain pin tells the drive to disable itself. Useful in certain datacenter environments but with consumer PC power supplies those pins still supply legacy 3v power which unfortunately makes the drive unusable. I could snip the power wire or break off the pins but instead I covered the first 3 pins (none are needed in modern drives though only pin 3 is the problem) with this electrically insulating tape and the drives now spin up and I'm fairly confident I don't have to worry about shorts, fires, or anything of the sort because of the properties of this type of material.Can't speak to high heat resistance or other uses and I've only had it in service for about 5 months. I'll probably replace the tape if I ever have to remove the power connector as Kapton is not guaranteed against mechanical wear and it's not sticky enough I trust it to stay in place after the connector is removed. Then again the lack of stickiness is a good thing because it means no residue.Just editing this to say I have since used this while soldering and I can confirm it protects components from a brief clumsy touch of the iron and its high heat, even at temperatures of 600 degrees F on my Hakko.
Tia M.
Reviewed in Canada on January 25, 2021
Worked perfectly for what I needed it for (heat transfer)! Used it under 400°F heat, didn’t melt or budge. This roll is very big, so you get a great value for your money!
partho chakraborty
Reviewed in Canada on November 3, 2020
its really good product, i have used for my
Guillaume Lessard
Reviewed in Canada on May 1, 2018
really usefull
Recommended Products