Your cart is empty.
Your cart is empty.Product Description
From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.
From the Manufacturer
Moen replacement part; 114299.Moen part number 114299 is a hose kit. Hose Kit Hydrolock Supply No finish. Replacement hose Kit. Hydrolock Supply. No finish to product.
VirtualShopper
Reviewed in the United States on January 16, 2025
My house is 2007 built, had this dual hose connector bathroom sink. The part# was labelled as 113016 and I could not find the same part number to replace. Had previously returned couple of them but this product was a life saver...works perfect as a replacement for part #113016. Thanks.
Alex
Reviewed in the United States on August 9, 2024
When my bathroom faucet began spilling water everywhere I had to search for a replacement line. After some research I found this product to be the updated version of mine and it worked fine. It was easy enough to install aside from the usual discomfort that comes with hanging out in a cabinet. No leaking and the materials seemed of good quality.
Agostino Battisti
Reviewed in Canada on July 11, 2024
perfect fit
Jeanna C
Reviewed in the United States on June 5, 2024
This sink hose is fool proof and so so so easy to install! My children recently pulled & broke the hose on our main level half bath sink. I have zero plumbing experience and was able to install this myself & fix our sink within minutes. Item arrived very quickly.
futz
Reviewed in Canada on June 28, 2024
Good replacement for an old one that snapped on one side. All good.
A. Kashif
Reviewed in the United States on December 11, 2024
Build quality: top notch.Functionality: as described.Fit: tight.Leakage: fixed this problem with the old connector.Excellent value.Be patient when installing in a tight spot. Look at one of your other sinks where this section is already installed. Make sure you hear or feel it click into place.
Nicholas V. Ramos
Reviewed in the United States on October 9, 2024
The media could not be loaded.
Ruotao Tang
Reviewed in Canada on April 5, 2024
The original Hydrolock 113016 broke a few days ago. After conducting some research and reading reviews, I purchased this part. It fit my sink perfectly and was also easy to install.
Customer
Reviewed in the United States on April 11, 2024
Good news is this fit my 20 year old fittings. Replace a Cooper Standard quick connect like other reviewers have stated.This is unfortunately a price gauge though given the part is not available anywhere else. The same material can be found in similar parts for half the price. But I suppose it’s better than having to replace the whole sink.
Webhoncho
Reviewed in the United States on November 24, 2023
Quick and easy replacement for a Moen quick-connect hose (old part was 113016). One of our 20 yo bathroom faucets developed a leak (at a crimp connection between one of the quick-connectors and hose). This part was a perfect fit.Good product. These hoses probably should be replaced every 20 years (or less), so inspect your hoses for dark discoloration from moisture at the crimps to the quick-connectors. The hose on our other sink shows the same discoloration, so I ordered another one of these to avoid a surprise leak. I give this hose 4 stars for "Value" since the part is pricey for a hose, but still worth it.Also, a quick hint when installing: When plugging in the center faucet connector, be sure to check that the connector will clear the sink's pop-up drain stopper handle; I had removed the drain stopper handle to install the new hose. The stopper handle didn't clear of course, so I had to unplug the entire hose (3 connectors) to flip it around so the center pop-up stopper handle would then clear. A small aggravation which you can now avoid with this hint!
RJL
Reviewed in the United States on February 12, 2022
Needed to replace a Cooper Standard model 113016 (with Hydrolock) combinatory sink hose. Searching around, my old hose appears not to be made any longer. The old hose was reinforced rubber which had hardened over time. This put strain on one of the Hydrolock fittings and snapped the HydroLock plastic where it is bonded to the hose by a crimped metal band.I was pleased to get the Moen 114299 hose assembly and see that it utilized almost exactly the same length of hose as my old assembly. The Moen Duralock fittings on the 114299 are also excellent substitutions for the Hydrolock fittings I had. The Moen 114299 assembly uses braided metal hose which is much more flexible than my old assembly and in assessing the flexibility, I do not foresee any issues with the new assembly suffering the same strain issues as my old assembly. Connections between hoses and fittings are still a metal band but they appear to be compression-banded and seem sturdier and less "clunky."Overall, I am very pleased with the Moen 114299 assembly as a suitable substitution for the Cooper Standard 113016 assembly I needed to replace and the "fit and feel" has me believing that I'll get much longer than the 10 years of service I got out of my old hose assembly.
Toncan
Reviewed in Canada on October 19, 2022
does the job
Manoj Kamath
Reviewed in Canada on April 9, 2021
I live in a older home. The previous owner put in MOEN brass capped faucets and the ITT rough-in snapped after about 5 years. It has a different type of mechanism and was a pain to take off - especially the snapped off piece from the brass inlet nose of the faucet. This new rough-in which they call a hose kit is awesome. It just snaps into place. No need to press snap-in buttons. Its easy to take off too. Total value for money. Will buy a replacement standby soon. It was a life-saver for me.
Recommended Products
