Your cart is empty.
Your cart is empty.Product Description
Keep interior wood projects looking beautiful with Minwax Polyurethane Wood Finish. This oil-based clear sealer protective coating protects and adds long-lasting beauty to woodwork, furniture, doors, cabinets and floors. The clear top coat is one of the most durable coatings for wood protection against scratches, spills and more. It can be used on both finished and unfinished wood projects, and is available in a variety of sheens. The fast-drying formula allows for quick recoats in 4-6 hours. Application Directions:
1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
2. Sand to obtain a smooth uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3. If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and dry times.
4. Stir Minwax Fast-Drying Polyurethane before and during use to eliminate settling on the bottom of the can. Stir to rotate the product from the bottom to the top of the can. NEVER SHAKE.
5. Apply a THIN coat of Minwax Fast-Drying Polyurethane using a high-quality natural or foam brush.
6. For floor projects, use a square buff orbital or disk-type sander with 220 grit sandpaper or the equivalent grit pad or screen (specifically designed for sanding between coats). Do not use a belt or drum-type sander for sanding between coats. Follow the sander manufacturer’s directions for your type of project.
7.Apply second coat. If third coat is desired, repeat step 6 before application.
8. After final coat, allow 24 hours before light use.
From the Manufacturer
A clear, oil-based, durable protective finish.
g
Reviewed in the United States on December 21, 2024
I used this varnish to refinish a kitchen table, a breakfast bar, and to finish a desk that I made. All turned out great. I added mineral spirits to thin it down, and used it as a wiping varnish. It worked much better than a popular brand pre-mixed wiping varnish, that costs multiple times as much. The kitchen table and desk now have 5+ years of use since refinishing, with no degradation of the finish.In all cases, after sanding, the wood was oiled with linseed oil. Table tops and desk top were then lightly sanded with a random orbital sander and 220 grit paper, until the oil+sanding dust filled the grain with excess "grain filler" wiped off across the grain. The wood was then sealed with a few coats of very thinned down varnish, until the wood would no longer absorb any more. Followed by several more coats of less thinned down varnish, applied as a wiping varnish (occasionally sanding between coats). The resulting finish is a warm golden color (from the oil) for both maple and oak. This oil based varnish works very well with the linseed oil treated wood.
Thomas L. Myers
Reviewed in the United States on December 14, 2024
Use Minwax products all the time! Love the stuff and you can't go wrong with it
Brenda
Reviewed in the United States on December 13, 2024
The finish is high gloss and makes my old floor look good.
Brian Galasso
Reviewed in the United States on November 5, 2024
Durable and a beautiful gloss finish. Minwax 63000 oil based is the way to go for beautiful professional looking results that last a long time and stands up to wear and tear.
GoodShopper
Reviewed in the United States on November 11, 2024
works well, dries fast
donald m.
Reviewed in the United States on October 7, 2024
The surface on your project will look like it was done in. a factory.
Phoenix Storm
Reviewed in the United States on October 3, 2024
This product is super oily and dips very easily. Manner of application is important! I initially brushed it on my kitchen cabinets after erroneously using a water based paint. Once this product dried, my cabinets looked like they'd been covered in Saran wrap AND frozen drips coming off the bottom (looked like icicles!). I proceeded to resand, repaint and then then apply a THIN coat of polyurethane using a sponge brush. I gave this product 5 stars because my fiasco was self inflicted. The product is just as described and good for small and large jobs alike as only a small amount is needed.
DaBears
Reviewed in the United States on October 25, 2024
Works as it should.. has a nice look to it after applying
joflo
Reviewed in Germany on February 4, 2022
While in Europe and in Romania Borma Wachs is the norm for this type of poly, the Minwax is a calss above in my opinion by the finished glare it has even for the mat. The Gloss is exactly this glossy.I used to put 2-3 slim layers of Borma Wachs as it has UV protection which Minwax lack, then a layer of Gloss and a layer of Satin. beautiful UV resistant finish.
Matthieu Rodellar
Reviewed in France on May 20, 2020
attention à bien lire les descriptifs, car le volume de produit est faible.
_Customer
Reviewed in Canada on December 23, 2018
Excellent results, tough finishing, easy to apply. Can be used with brush, roller or spray. But you should also be aware that the regular type doesn't really dry that fast (indoors, 70F 60% RH, cross-ventilation), it takes 4-6 hours to be touch-dry, and 24-36 hrs to completely cure. Also, very high VOC contents, it will take a week or more to fully disipate solvent smell.
Blacky
Reviewed in Canada on December 5, 2017
Excellent product. Have to apply several coats to get the Luster I need.
Recommended Products
