Your cart is empty.
Your cart is empty. About us, Professional factory, welcome to our store for more choices with best price. What we pursue is your satisfaction of our service, not just for our goods. For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. We will reply you about any question you ask within 24 hours.
Franklin
Reviewed in the United States on February 9, 2025
Very nice i didnt know what to think of this but now i jave in hand and one my drone it work great for it simplicity but all in all very nice and quality product. I will buy another one.
robert ramsey
Reviewed in the United States on July 2, 2024
It works with a little customization . This is number 2 . I had to get a replacement because one of the servos stopped working while testing . You should also know it will need to be assembled , and will have no instructions . It cost me $5 out of pocket to ship the malfunctioning product back . I will be looking to get a better one very soon . I would not buy it again
Katie Fant Gibson
Reviewed in the United States on May 17, 2024
Servo burned out in seconds of use.Servo horns need a little love to fit. Super ez. On the short arm up top for tilt just use the smaller horn shaped like it. Cut off the end so the tip is at the mounting hole. I used scissors. Fast and trimmed a round edge. Then just go around the sides and the tip with a sanding block.Bottom one is the cross style. Just hit the side edges with sanding block and it slides in. Whole thing with fitting took maybe 30 minutes to assemble and never done one before. Looks decent for the money.
Cliente de
Reviewed in Mexico on March 1, 2024
Es una base giratoria típica de plástico , no esperen alta calidad, el brazo para el giro hacia arriba y abajo para la cámara realizado con el motor superior debe usar una pieza de plástico que da soporte al motor, pero debe ser cortada con un exacto (cutter) ya que no ensambla por su tamaño original (se debe cortar un poco en las partes laterales para que embone mejor). Tornillos sobran los de uno de los motores y dos de la base de plástico, sin embargo se pueden usar para fijar la base a una tabla de MDF o madera según donde quieran fijar la base. Viene sin instrucciones, así que solamente a pura vista se va analizando como armarla.
Robert Couture
Reviewed in Canada on October 26, 2024
Easy to build but both my servos were doa lucky I wasn't planning on keeping them.
Joseph R Heiderman
Reviewed in the United States on January 22, 2024
Like most people said, there were no instructions and there were assembly problems. Only buy this if you like to tinker. You will need some kind of exacto knife or cutter to trim the servo "horns" to fit, a small phillips head screwdriver. Use a piece of cardboard to make some small spacers to place between the upper servo and its plastic mounting to reposition it slightly so the servo doesn't rub against the mount. (see the picture) It took me about an hour to assemble, but in the end it works. Good luck.
Cyberwip
Reviewed in the United States on May 9, 2023
The short horn does not fit the side mounted top servo because the mount fits a 4-hole horn and the shortest horn provided with the servo is 5-hole.Side cutters clipping length and a light sanding and it works perfectly.Bottom mount, long horn fits perfectly as does the rest of the mount, works out to be a very solid build.9g servos are same as you get in the Arduino kits and work well although are built more for experimentation and prototyping than controlling heavy loads.For experimenting, they work great with ESP32-CAMs' and are a cheap introduction to servo control.They can be a lot of fun and endless entertainment if you can accept that they are not industrial equipment.For industrial use, go metal, for experimentation and scale, these are perfect.- Kent
The Batman
Reviewed in the United States on January 9, 2023
Overall, this is a neat little tilt stand. It is on the small side (which was good for my application), and you're given more than enough mini screws to put everything together. There is some self-discovery as to which screws go where, but in the end, I don't think it really matters. The main downside to this stand is that the servo horns (the little plastic pieces you fit onto the tops of the servos) are incorrectly sized for the application. Provided you have some servo horns left over from a better servo manufacturer, though, you'll be fine (TIANKONGRC servos/horns fit perfectly). The servos provided are also just slightly bigger than other servos, so keep that in mind.Hope that helps somebody, and cheers!
rogelio
Reviewed in the United Arab Emirates on September 21, 2022
The item was not good as per the unit the parts is different not matching..
Geronimo B.
Reviewed in Australia on October 3, 2022
I wasn't expecting much at this price point but what I got was shocking. Strikingly different product than the one in the pictures, cheap nylon servos, brittle plastic and what's worst, as it comes you WILL NOT be able to assemble it. The servo horns DO NOT fit the plastic cut outs., and servo doesn’t fit into the round part. Absolute waste of money
juan jose martin
Reviewed in Spain on December 8, 2021
No ayuda en absoluto que el kit venga sin ninguna instrucción, ni imagen de montaje. Al final sobran tornillos y no sabes su destino.Los brazos de los servos no encajan en los alojamientos para lo que están diseñados. Hay que mecanizar las piezas. Con lo cual entorpece su montaje.No hay que esperar que todo el mundo tenga medios, ni tiempo, ni ganas de investigar el montaje. De algo que compras esperando su perfecto estado.Muy decepcionado
Jay Yoder
Reviewed in the United States on October 11, 2021
The servo horns do not fit the base. You will need to trim them and they shatter very easy. The screw holes in the horn do not align with the screw holes in the base. I had to glue them in. After it is assembled the tilt mechanism does not sit squarely on the tilt mechanism. This is a cheep piece of crap not worth the money or the aggravation.
Cordell M.
Reviewed in the United States on October 16, 2019
One star because it arrived. Other than that one of the servos wires wasn’t even inside of servo. Never soldered never connected. It’s such a cheap item that when it’s not all working upon delivery ...it wastes my life to even return it. I’d rather pay more for one that came correctly working. So disappointed in the stupid waste of my life buying this pos. But really. Pick any ten with same pictures and product. You never really know. Amazon has to be loosing its ass on dumb returns. I’ve had so many lately. Chinese quality control has gone to crap. We need more American electronics company’s. At least we would make something that turns on.
Recommended Products
$10.99
$ 5 .99 $5.99