Your cart is empty.
Your cart is empty.For the past 70 years, Milton has been the product of choice when it comes to pneumatic accessories. We have invented numerous industry standard products, including the classic M-Style “I/M” KWIK Change Coupler and Plug, Window Inflator Guage, Safety Blow Guns and the iconic Driveway Signal chimes and bell. With these inventions, our portfolio has grown to over 1400 different SKU’s. These products cover a broad range of applications in various industries, such as automotive, fleet maintenance, construction, and manufacturing. To this day, Milton continues to be the industry leader in high quality pneumatic accessories and fittings, proudly living up to our heritage of superior products and reliability
David S.
Reviewed in Canada on June 9, 2024
These have dramatically improve the performance of all of my air tools , I should note that I also use a half inch air line .I was skeptical about the durability as they for obvious reasons have less material than the 1/4" fittings but have used them exclusively now in my shop every day for 8 hours a day I have yet to have one fail .Highly recommended .
Jcake2
Reviewed in the United States on March 19, 2024
Worked great on tools saw big improvement in flow . also for those wondering also fits with kobalt and Harbor Freight fittings
master Irrigator
Reviewed in the United States on November 6, 2024
These are a must have for high air use tools. So then you need to switch everything because even if the female accepts the standard chuck it still leaks. Wish they were priced better.
Mike Frampton
Reviewed in Canada on October 20, 2024
I am a mechanic by trade but bought these for at home. I am very happy so far.
Justin Roberson
Reviewed in the United States on January 22, 2023
These are exactly what I was looking for. I work in a shop and I use these every day and it helps my tools get the most air flow and power that I need to do the job. Just make sure you also change out your quick coupling to a high flow as well or else it will not work. More air means more power, more power means better the job goes. Anything to make your work life a little better. These high flow fittings have been doing a great job for me.
Dr.Fiero
Reviewed in Canada on August 8, 2021
The "V" style fittings flow wise are about as good as it gets. Major bonus is that you can still stuff your "M" fittings into the V couplers. Of course you don't get the air flow gain, but at least they fit.Wife loves the color of these. That's important. ;)The only thing I don't like about these is that they're aluminum - so be careful you don't put a tool down hard or you might dent them. No way you'll get 20 of them in brass for this price though.
EddieYouDaMan
Reviewed in the United States on July 14, 2020
I'm not a professional mechanic who turns a wrench for a living and my air compressor is a 21 gallon, 2.5 HP, 125 psi Central Pneumatic from Harbor Freight that I've had for the past 3 years. I mainly use my air tools for routine maintenance on my cars and yard equipment and my son and his friends use them for their cars. With the exception of a Matco MT1712 1/2 impact gun, all of my other air tools, air fittings and air hoses are Central Pneumatic from Harbor Freight. With that being said, I was never really impressed with the performance of my air tools, however, since I bought them from HF, I wasn't really expecting much. Recently, I needed a new air hose and also decided to change out my hose fittings. I Googled which would be the best hoses and fittings and consistently saw Milton V-Style fittings in my searches. In addition to purchasing the Milton HIGHFLOWPRO S-314VKIT package with couplers and fittings, I bought these because I needed additional male fittings for other air tools and accessories. I had read the reviews regarding durability since these were made from anodized aluminum and wasn't too concerned because I don't really abuse the hoses or fittings. After installing them with Teflon thread tape I had a chance to use an air chisel and air hammer for a project. I could tell right away that the performance was much better. The air chisel was bouncing around a lot and the coupler and fittings were getting a good workout. There was no noticeable damage or defect at all in the fit or finish. Upon using my impact gun I was able to see a definite improvement in performance when trying to remove rusted bolts. These fittings definitely improved performance. I grease the internals of my impact gun regularly and also use an in-line lubricator but was never really satisfied with it until now. I had actually considered upgrading my impact gun to get better performance. The only "down" side to these fittings is that you'll use a lot more air and your compressor will kick on more often. I also bought the steel version of these fittings (Milton S-217) and they work just as well. If you're worried about the durability of the anodized aluminum then that would be your best alternative although they are not purple. The Milton V-Style couplers are backwards compatible with other fittings but you won't get the increased airflow that you get when you have all V-Style fittings and couplers. The V-style fittings WILL NOT mate up to non V-Style couplers. I also use Marvel Mystery Oil to oil all of my air tools and Royal Purple Synthetic compressor oil in my air compressor.
Kevin H.
Reviewed in the United States on June 28, 2020
I decided to give the V-style a try. When I rec'd the kit I immediately tried blowing through unused I-style... Full lungs, forcing, it took maybe 5 seconds. I then tried blowing though the V-style the same way... took about 1 second and I didn't have to force that much!!!I bought the 20male pack and the combo pack. To insert the male into the coupler takes an easy push, not necessary to pull the release!! And this is under full pressure!! Disconnect is just as easy, but, I'm not worried about accidental disconnects.Another thing that will be helpful when considering this style... I am going through my system for choke points. I found that the main reel hose ID is smaller than these connectors. Good thing is, I still have the original fat rubber hose that came with the reel. But, I still have points from the tank to the reel that have small IDs. Just keep this in mind when changing over to V-style.Otherwise, the ease of use and the flow are great!!! I cannot determine yet if the durability is great... but considering that the males are aluminum, I would assume that steel or brass would hold up better... but then again, I don't beat the crud out of my tools...
Icarus
Reviewed in Canada on February 13, 2020
Nice quality fittings with better flow then regular ones. Easy attach/detach accessories. Good deal for the price (~$16CDN) May not last as long as steel ones but for a home shop should be great...
Kindle Customer
Reviewed in the United States on January 2, 2020
Really woke up my airtools. The impact gun has never worked so well. The only concern is they are aluminum and thin walled. If you drop your tool and it lands on connector its going to bend. So far (3 months) and all is well.
Customer
Reviewed in Canada on January 1, 2019
Needed some new fittings but decided to change them all to these for the air flow. Gives your air tools that little extra. Great product
James McCloud
Reviewed in the United States on May 4, 2018
These are awesome fittings!!! I switched all my tools and stuff out with these fittings. They provide way more air and seem of decent quality essentially for the price! They are real lightweight so we'll see how fast they wear down but so far there doing good! Oh yeah the finish or color on them seem better then most I've tried as far as rubbing or scratching off, but if not somewhat gentle while tightening with tools it can scratch but nowhere near as bad as others. For the price I paid for a box of 20, if I can get a year out of 1 I'll continue to buy new 20pks of them lol I've put them through a short but somewhat ruff period of using in my shop and so far I don't see me having an issue getting at least a years use out of 1 if not more but I'm certain I'll at least get that long and that's using 4 or 5 days week for around the house projects and personal automobile stuff. For a normal garage type of use only being used a handful of times a month you probably wouldn't have to replace them for many years
Recommended Products
