Your cart is empty.
Your cart is empty.Product Description
Daniel Hathaway
Reviewed in the United States on January 6, 2025
Worked as advertised, direct fit between the air hose, and the Patriot series air brush. Great value. Slight air leak I've noticed, so Teflon tape might be needed
Retired Cheese Head
Reviewed in the United States on January 12, 2025
Need an adapter for my air brush compressor and this works perfect.
Customer
Reviewed in the United States on January 1, 2025
Worked to connect my badger patriot to the Master mini compressor. No issues so far.
MSL
Reviewed in the United States on August 9, 2024
My older model master air brush is now compatible with standard air brush hose
Mark Ettridge
Reviewed in the United Kingdom on August 5, 2024
Despite the description this adapter does not fit all Aztec airbrush screwthreads so be careful when purchasing this check with other suppliers first
Alejandro Vigil
Reviewed in the United States on November 17, 2024
Good quality. I use it to conmen my 3/8 compressor hose to my airbrush.
Gary
Reviewed in Canada on January 16, 2024
If you are looking to connect an iwata hose to a Timbertech Air compressor this is the 1/4" BSP Male to 1/8" BSP Female Fitting you are looking for. I didn't even need to use a thread sealer, it sealed fine without having to thread it with much effort.
Dave S
Reviewed in Canada on November 24, 2023
Does the job
Manuel D.
Reviewed in Mexico on September 15, 2020
No me llegó, me tuvieron mensaje de retraso en mensaje y al final que no llegaba, no fue buena experiencia
Piper One
Reviewed in Canada on July 13, 2019
When connecting to a standard made in the Canada/USA compressor not specifically designed for using with an airbrush, this is the fitting you need to connect your airbrush hose to that standard air compressor. It works perfectly and doesn't need wads of teflon tape to help it seal air tight. Worked like a charm!
Will H
Reviewed in the United States on January 21, 2014
I used this adapter for a completely different purpose than most:I wanted to add a 1/4" quick connect to my irrigation system to blow out lines with my air compressor for winter, but the valve installed only had 1/8" threads. This fixed that issue perfectly. I added a 1/4" ball valve between this adapter and the male quick connect to keep the system closed.Threads were the right size, but required an extra few wraps of Teflon tape (might have been due to my valve assembly).
Kelly O
Reviewed in the United States on July 4, 2012
Works great once I connected it properly. The adaptor attaches directly to the Badger airbrush then the Master air hose attaches to that and the mini compressor. Initially I used the Badger air hose, not the Master hose, and used the adapter at the compressor end. All seemed to fit properly but the Badger airbrush wouldn't spray. Once I put the adapter directly onto the badger airbrush and used the Master airhose, all worked beautifully. (I don't have much airbrush experience so that might have been a no brainer for someone else.) The badger air gun has a wider spray span than my Master airgun but it uses canned air which is very pricey and doesn't flow consistently. The 1/4" adaptor Badger recommends for connecting to a compressor was too large for my mini compressor. This adaptor was an inexpensive way to use either airbrush with the mini Master compressor I already have and avoid canned air.
Recommended Products