Your cart is empty.
Your cart is empty.Daniel
Reviewed in the United States on March 7, 2025
Install was straight forward. They look and work great.
Daniel
Reviewed in the United States on March 7, 2025
Install was straight forward. They look and work great.
Customer
Reviewed in the United States on March 13, 2025
I'd give 0 stars but it wont allow. I've literally just installed these on my truck. Testing everything and it just sheared a pin in the axle. Are you serious!!!!
Customer
Reviewed in the United States on March 13, 2025
I'd give 0 stars but it wont allow. I've literally just installed these on my truck. Testing everything and it just sheared a pin in the axle. Are you serious!!!!
Steve
Reviewed in the United States on January 30, 2025
Great fit and finish. Work perfectlyOrdering a 2nd set
Steve
Reviewed in the United States on January 30, 2025
Great fit and finish. Work perfectlyOrdering a 2nd set
Randy
Reviewed in the United States on January 19, 2025
They look very nice quality but with my brushed set up I have broke something both times I’ve been able to use it. First the pin through the front driveshafts and then after I fixed that I used it and the rear pinion gears sheared. Kind of disappointed
Randy
Reviewed in the United States on January 19, 2025
They look very nice quality but with my brushed set up I have broke something both times I’ve been able to use it. First the pin through the front driveshafts and then after I fixed that I used it and the rear pinion gears sheared. Kind of disappointed
Benjamin
Reviewed in Canada on January 12, 2025
Frist thing. Your paining $140 for axles. They should come in a box. Not a bag. Because of it the rear axle was is scratched. No over/under drive gear. You don't get the full 52° turning. Front helical gear and pinion was stripped. Was not to impress with these. For anyone wanting good quality axle. Injora is the way one go. Even the customer service is better.
Benjamin
Reviewed in Canada on January 12, 2025
Frist thing. Your paining $140 for axles. They should come in a box. Not a bag. Because of it the rear axle was is scratched. No over/under drive gear. You don't get the full 52° turning. Front helical gear and pinion was stripped. Was not to impress with these. For anyone wanting good quality axle. Injora is the way one go. Even the customer service is better.
David M
Reviewed in the United States on July 7, 2024
I used the brass Meus laydown mount and not the aluminum one that came in the kit. The brass servo mount is 8.2g heavier and the total weight ready to install was 140g more or less with the Meus 8.5kg coreless servo.Time will tell how they perform but I'm happy at the moment.
David M
Reviewed in the United States on July 7, 2024
I used the brass Meus laydown mount and not the aluminum one that came in the kit. The brass servo mount is 8.2g heavier and the total weight ready to install was 140g more or less with the Meus 8.5kg coreless servo.Time will tell how they perform but I'm happy at the moment.
Santiago Salinas
Reviewed in the United States on November 21, 2024
The MEUS RACING TRX4M axles are an awesome upgrade for the TRX4M platform. I used them with my MEUS MB18 build, and they paired perfectly. These axles really bring together great looks, solid performance, and durability—though I did run into some initial hiccups.Pros:Build and Looks: These are made from aluminum alloy and brass with an anodized finish. They feel super durable, and the diamond-cut diff covers and brass hubs look amazing.Performance: The combined weight (142g) adds a lot of stability. The 52° steering angle and isokinetic 3-section CVDs make turning buttery smooth, even at big angles. The wider stance (+5mm on each side) and 10° kingpin inclination give better stability and control.Options: It comes with two servo mount choices (laydown or upright), which is a nice touch. I went with the laydown mount since I used an upgraded servo it really helps with crawling.Gears: The metal helical gears and ball bearings are a big step up from the stock plastic ones—no comparison.Cons (at first):My initial set had an issue with the front axle helical gear—it was too short to stay in proper contact with the differential's big gear.There are no instructions included, which can make installation tricky if you’re new to RC builds.Once the Replacement Came In:MEUS Racing replaced the faulty axles quickly, and the new set was flawless. The axles spin smooth with zero binding, flex without any issues, and the turning radius is insane. The added weight and solid construction make them a game-changer for crawling.Final Thoughts:For the price, these axles are a great deal, especially with MEUS Racing’s excellent customer support. Whether you’re building a crawler for performance or just want something that looks sharp, these axles are worth it. They’ve held up great so far and really elevate the TRX4M. Highly recommended!
Santiago Salinas
Reviewed in the United States on November 21, 2024
The MEUS RACING TRX4M axles are an awesome upgrade for the TRX4M platform. I used them with my MEUS MB18 build, and they paired perfectly. These axles really bring together great looks, solid performance, and durability—though I did run into some initial hiccups.Pros:Build and Looks: These are made from aluminum alloy and brass with an anodized finish. They feel super durable, and the diamond-cut diff covers and brass hubs look amazing.Performance: The combined weight (142g) adds a lot of stability. The 52° steering angle and isokinetic 3-section CVDs make turning buttery smooth, even at big angles. The wider stance (+5mm on each side) and 10° kingpin inclination give better stability and control.Options: It comes with two servo mount choices (laydown or upright), which is a nice touch. I went with the laydown mount since I used an upgraded servo it really helps with crawling.Gears: The metal helical gears and ball bearings are a big step up from the stock plastic ones—no comparison.Cons (at first):My initial set had an issue with the front axle helical gear—it was too short to stay in proper contact with the differential's big gear.There are no instructions included, which can make installation tricky if you’re new to RC builds.Once the Replacement Came In:MEUS Racing replaced the faulty axles quickly, and the new set was flawless. The axles spin smooth with zero binding, flex without any issues, and the turning radius is insane. The added weight and solid construction make them a game-changer for crawling.Final Thoughts:For the price, these axles are a great deal, especially with MEUS Racing’s excellent customer support. Whether you’re building a crawler for performance or just want something that looks sharp, these axles are worth it. They’ve held up great so far and really elevate the TRX4M. Highly recommended!
Anonymous
Reviewed in the United States on October 31, 2024
There are no instructions, the gears in the rear diff lock up every few turns, and the rod ends would not fit on the arms. Very nice looking product but overall function was absolutely terrible. Could be cool for show truck but not for something you wanna actually run.*update*Meus Racing reached out to inform me of a batch error with some axles and very kindly shipped a replacement set to me to correct the product quality error. The replacement set i received are extremely high quality and well manufactured. Servo fits snug and laid down with no binding from any amount of flex, axles spin fast and free of binding, and the turning radius is incredible on these. I will most likely purchase a pair for a trx4m monster truck build I'm working on. Thank you Meus, if you consider purchase these axles I highly recommend.
Anonymous
Reviewed in the United States on October 31, 2024
There are no instructions, the gears in the rear diff lock up every few turns, and the rod ends would not fit on the arms. Very nice looking product but overall function was absolutely terrible. Could be cool for show truck but not for something you wanna actually run.*update*Meus Racing reached out to inform me of a batch error with some axles and very kindly shipped a replacement set to me to correct the product quality error. The replacement set i received are extremely high quality and well manufactured. Servo fits snug and laid down with no binding from any amount of flex, axles spin fast and free of binding, and the turning radius is incredible on these. I will most likely purchase a pair for a trx4m monster truck build I'm working on. Thank you Meus, if you consider purchase these axles I highly recommend.
Richard Houzvicka
Reviewed in the United States on October 24, 2024
I ordered this but only received the rear axle, but a replacement was ordered immediately through Amazon. If the front is as nice as the rear when it gets here I’ll be totally happy. Nice weight, ball bearings instead of sleeves, metal helical gears instead of the plastic stock.
Richard Houzvicka
Reviewed in the United States on October 24, 2024
I ordered this but only received the rear axle, but a replacement was ordered immediately through Amazon. If the front is as nice as the rear when it gets here I’ll be totally happy. Nice weight, ball bearings instead of sleeves, metal helical gears instead of the plastic stock.
Recommended Products
