How to Use
1. Hold the detector, scan slowly in an arc, and turn yourself together. At this time, the elbow should always be close to both sides of the body, and it can be turned about 40 degrees to 60 degrees. Explorers must rotate slowly and keep their body stable.
2. Standardize your scanning action. First of all, let the receiving antenna properly extend and open. Make the receiving antenna right in front of you, open at 90 degrees with your body, and cannot deflect to the left and right sides.
3. When the antenna is aimed at the target, the detectorwill be determined, although you continue to explore beyond the target. When you think this determination is effective, you should remember this direction. Then, move the detector about 10 meters to the left or right, and repeat the process of determining the policy just mentioned. Observe the determined direction this time, and the intersection of the two directions is the buried position of the target.
4. If you think there is a certain deviation in the specific direction measured just now, you can determine it from another viewpoint. If the target is within 10 meters or so, you should walk slowly and steadily along a fixed route. When you pass the target and are directly above it, the antenna of the detector will shake on both sides. At this time, the measured position is very accurate. (Please refer to the manual for specific operation instructions) The product has degaussing function (degaussing can be achieved as long as the probe of the receiver is close to the ferrous metal and the alarm is given 3 times)
