Your cart is empty.
Your cart is empty."
INTRODUCING THE METABO HPT 36V MULTIVOLT™ PORTABLE REBAR BENDER/CUTTER — POWER AND EFFICIENCY FOR EVERY JOB
This cordless rebar bender/cutter is a game-changer for construction professionals. With its powerful performance and efficient design, it delivers approximately 270 cuts and 520 bends at 90° of #5 rebar per charge using the included 4.0Ah MultiVolt™ Metabo Battery. The brushless motor enhances the tool's performance, ensuring fast and precise cuts every time. This rebar bender/cutter comes with Metabo HPT's 5-year tool warranty, 2-year battery warranty, and 1-year charger warranty.
ENGINEERED FOR POWER, SPEED, AND VERSATILITY
The Metabo HPT 36V MultiVolt™ Portable Rebar Bender/Cutter delivers fast and precise cuts. It can cut #5 rebar in less than 3 seconds, ensuring accuracy and efficiency. With its versatile bending capabilities, it can bend 1 piece of #5 rebar, 2 pieces of #4 rebar, or 3 pieces of #3 rebar at once. The color-coded angle adjust dial allows users to set accurate bend angles up to 180° for various applications.
DUAL POWER SOURCE TECHNOLOGY FOR ADDED CONVENIENCE
The Metabo HPT MultiVolt™ technology allows you to power the tool with the included 18V/36V MultiVolt battery for cordless operation or plug it into an outlet using the AC Adapter (sold separately) to save battery life.
COMPLETE REBAR BENDER/CUTTER KIT FOR EXTENDED PERFORMANCE
This kit includes everything you need for uninterrupted operation: (2) 36V MultiVolt™ 4.0Ah batteries, (1) Rapid Charger with USB Port, (1) Deflection Guard, (1) Pair cutter set (on tool), (1) 4mm Wrench (on tool), and (1) Carrying Case.
CHOOSE METABO HPT FOR PROFESSIONAL-GRADE RELIABILITY
Metabo HPT power tools are engineered for durability, safety, and performance. With a legacy of quality craftsmanship, Metabo HPT tools are trusted by professionals and DIY enthusiasts alike. Discover our full range of innovative tools and accessories at the Metabo HPT store.
"Crazy Marty
Reviewed in the United States on January 8, 2025
The media could not be loaded.
Steven L.
Reviewed in the United States on March 31, 2024
When it works it will burn through a bundle of bar in no time, if you routinely cut/bend #5 (something Metabo claims it can do) it will start ratcheting and fail to cut or bend just around end of warranty. Smaller bar seems ok.I own two of them. The first one failed to cut a #5 and went in for repairs for 3 months, it still can't cut or bend a #5 after being repaired and retoothed. The second one the controller failed and started over bending to the point of ratcheting/snapping noises, it has been in the shop for six months now.I miss the days of the rugged old Hitachi tools, Metabo is garbage.
murgletroid
Reviewed in the United States on December 26, 2024
Yes, it's not cheap, but wow it makes working with rebar so much easier than the manual benders. I love how portable it is (much smaller than most electric benders). I've been using it for about 9 months now. It works very well bending pairs of #3 bars, and #4 bars. Cuts #3 and #4 grade 60 bars like butter too. I've not used it for #5.I wish the adapter for smaller radius bends were still available, because the radius is a little large for #3 ties/hairpins.
cynthia rouse
Reviewed in the United States on December 11, 2024
This worked perfectly and made jobs so much easier
SD
Reviewed in the United States on October 27, 2024
This tool has been good but not great. For starters it doesn’t get much use at all and we had a battery just not take a charge the other day “maybe used this tool 20 times total in 2 years…The other issue is that when you cut rebar that needs to go into drilled concrete it leaves a nasty oval shaped cut since it actually snaps the rebar vs cutting. The pressure deforms the steel where it snaps so if you’re trying to hammer it into a concrete hole it’s a little harder than normal.More irritated about the battery since we only have Dewalt cordless and can’t interchange if needed. Stuck with 1 good battery but who knows how long that will last now…
general
Reviewed in the United States on August 29, 2022
All I can say is I regret not having one of these many years ago. Though it seems like another expensive handheld tool/drill/saw etc.- it isn’t. This tool impressed us so much we ordered another one. We were able to bend stirrups, square ties fully enclosed cages, and you can measure your bend lengths easily and precisely. It blows me away how great this tool is. Hitachi/Metabo tools have always impressed me but I’m speechless how great this is. It’s pretty heavy so don’t think that it’s going to break after a few bends. I could see this machine in daily use lasting years. It’s heavily geared with low gear ratio. Also cuts like butter. We stand it up on end and slip the bars through.Great tool for small jobs, pre-fab & bending on site. Forget about any kind of hand bender once you have this machine in hand you’ll know exactly what I mean… you won’t regret it.
Ashley
Reviewed in Canada on August 13, 2021
Best rebar bender we've ever had. Bought it for bending 10mm and 15mm rebar for ICF construction.
Jean-François Cullen
Reviewed in Canada on May 16, 2021
Super
Joe
Reviewed in the United States on December 10, 2019
My wife and I are in the process of building our home and I bought this so she could help with the rebar.Honestly great product, easy to use and effective.Cost is high but it cuts and bends something that my 12in demo-saw doesn’t do. AND there isn’t a fear of sparks starting a fire.I was able to cut and bend 256 48”x12” #4 dowels in 2hrs using this tool. Ya it costs too much money but with the lack of available labor its worth it.
A H
Reviewed in the United States on November 27, 2019
I like the bender but the cutting is not very good
Recommended Products
