Your cart is empty.
Your cart is empty.Product Description
- Differential pressure measurement
- Max / minimum / Average reading record function
- Data Hold and Error code Functions
- Over/ Under range indicator
- Tube connector measuring: 1/8" (3.18mm)
- Hose Diameter: Inner : 3mm ( 0.3cm ) Outer : 5mm ( 0.5cm)
- Right on the requirements, you are looking for
- Large LCD backlit dual display
- Zeroing, offset and data compensation
- Low battery display and Auto power off set up function
- User can re-calibrate the meter at anytime
Gordon24
Reviewed in the United States on February 2, 2025
I confirmed it was working by blowing lightly across the port(s). Once I attached the tube and the probe it was firmly stuck at 0. Returned it and got a different brand which worked perfectly.
James D.
Reviewed in the United States on January 24, 2025
Excellent tool love it
Mike Nowak
Reviewed in the United States on June 2, 2024
EXCELLENT PRODUCT!! Does exactly what it is designed to do!! Purchased two more for my field technicians.
mick duffill
Reviewed in the United Kingdom on November 3, 2024
as described and ideal portable tool
M. G.
Reviewed in Spain on October 29, 2024
Perfecto para su función
Johnny Lunchbucket
Reviewed in Canada on February 18, 2023
Bought this after making a water column U-Tube manometer. That worked but blew the water out often. Not recommended although they are most accurate. So I bought this. Wow. It IS accurate and you can zero it. You can also set it to stop powering itself down after a few minutes, which is recommended.I used this for my RV after installing an on-demand water heater. I wanted to be sure it was getting proper pressure. I also installed a new regulator since mine was 20 years old.In my case, it's common for me to run the furnace at the same time as the water heater. So I put the furnace on and set the regulator to 11" of water based on knowing the water heater needed 11".This made a significant difference in the operation of both the furnace and the water heater. The noise from the water heater while running was greatly reduced. It's now virtually silent. And the furnace works like a top. I checked the readings with several cycles of the furnace and it's accurate and repeatable. This is a good manometer to buy. Just treat it gently as it is Chinese.Also, I was able to determine there were no leaks in the propane system after 30 minutes. Excellent. You can easily buy an adapter to fit the 3/8 flare fitting on the propane feed line to the water heater at Home Depot or most any hardware store.
mario
Reviewed in Italy on January 2, 2023
Provato per taratura caldaia, funziona molto bene, non è uno strumento professionale ma svolge egregiamente il suo lavoro
Kieran Earney
Reviewed in the United States on February 23, 2022
Worked great for adjusting the gas regulator on my furnace
Schlaubi200678
Reviewed in Germany on April 25, 2022
Gut und günstig , Verarbeitung ist gut , Messwerte zeigen keine Abweichung mit Profigeräten.Habe das Messgerät für Heizthermen und Brennwertgeräte / Brenner im Einsatz , funzt im Keller sehr gut. Habe noch ein Testo für mehr € im Einsatz mit Eichprotokoll alle 12 Monate , bisher keine Abweichungen erkennbar. Schlauchanschlüsse baut sich der Fachmann bekanntlich ja selbst. ich habe hier Schläuche aus dem Ölzubehör im Einsatz 6mm hochflexibel. Die mitgelieferten Schläuche sind nicht so der Hit, kurz und eher etwas für das Labor. Insgesamt Preis Leitung Top
ben
Reviewed in the United States on March 10, 2021
the digital readout is very good
COguy
Reviewed in the United States on February 19, 2021
We had a need to measure low gas pressures without spending an arm and a leg. This seems to fill the bill. Accuracy unknown as we have nothing to check it against.
Fred is not dead
Reviewed in the United States on December 13, 2020
Worked well for price. I used it on my furnace and then to validate the calibration on a another device. Good for light work but nit so much if you use it full time as a technician
ZachO
Reviewed in the United States on May 31, 2019
The rubber tubing is not durable. It works, but I've already had to cut damaged sections off the tubing a couple times. If I use it too much, there will be none left! Also there's nowhere to store the threaded attachment in the case. It's easy to lose.As far as functionality, like I said: it works.
Recommended Products