Shopping Cart

Your cart is empty.

Your cart is empty.

Malone MicroSport XT Trailer

Free shipping on orders over $29.99

$2,159.10

$ 99 .00 $99.00

In Stock
  • Upgraded version of Malone's popular MicroSport Base Trailer includes three top-selling accessories at reduced bundle price
  • Custom 12-inch aluminum spoke wheels and diamond plate aluminum fenders; removable and retractable tongue for easy storage
  • DOT-approved lighting and bearings, pre-tested electrical system, pre-fitted chassis components, and 65-inch coated steel load bars; assembles in less than three hours
  • Measures 65-by-159 inches (W x D; 102.5 inches long retracted); 800-pound capacity; standard two-inch hitch coupler
  • Includes limited five-year manufacturer's warranty


Product Description

Malone MicroSport XT Kayak Trailer - The NEW MicroSport XT Kayaking Trailer is an upgraded version of the popular MicroSport Kayak Trailer that includes the two top selling accessories at a reduced bundled price. The MicroSport XT Kayak Trailer has custom 12' aluminum spoke wheels for a great finishing touch while you are traveling AND a retractable tongue with lift handle for easy storage. With the tongue retracted, the trailer can be stored against a wall taking up less floor space. The galvanized steel frame can support up to 800 lbs. The 65in. wide crossbars are compatible with all types of gear carriers from Malone, Yakima, and Thule, while the extended heavy-duty tongue allows you to haul 4 boats up to 19' in length. Each kayak trailer kit comes with complete detailed instructions and assembles in less than three hours. Like the base model, the XT has DOT approved lighting and bearings, pre-fitted electrical system and pre-fitted chassis components. Eliminate the headaches of loading boats, bikes and luggage on your vehicle's roof, and save on gas by having your gear ride in your slipstream. The innovative and reliable MicroSport XT Kayaking Trailer is the best value in a sports trailer.

Amazon.com


Corrosion-resistant, diamond plate aluminum fenders add style while helping protect your kayaks. The MicroSport XT is an upgraded version of Malone's popular MicroSport Base Trailer that includes the three top-selling accessories at a reduced bundle price.

The trailer has custom 12-inch aluminum spoke wheels and diamond plate aluminum fenders, as well as a removable and retractable tongue for easy storage. The eight-foot tongue can be removed in seconds, allowing you to store the trailer vertically against a wall, taking up less than 20 square feet of floor space.

Similar to the base model, the XT has DOT-approved lighting and bearings, a pre-tested electrical system, pre-fitted chassis components, 65-inch coated steel load bars, and assembles in less than three hours thanks in part to comprehensive, award-winning instructions.

Features

  • Pre-assembled hubs with sealed bearings for a clean and simple installation
  • 12-inch standard aluminum star spoke wheels with SS wheel caps
  • Corrosion-resistant, diamond plate aluminum fenders
  • Extra long tongue can transport boats up to 20 feet in length
  • Chrome lift handle mounts directly to the coupler
  • 65-inch coated steel rectangular load bars fit nearly all accessories, and provide stronger attachment than round bars

    Specifications

    • Measures 65-by-159 inches (W x D; 102.5 inches long retracted)
    • 355-pound capacity
    • Standard two-inch hitch coupler

      Warranty
      The MicroSport XT Trailer includes a limited five-year manufacturer's warranty against defects in materials and workmanship.

      About Malone Auto Racks
      Malone Auto Racks is the fastest growing rack accessory company in North America, with more than 10 years of industry leadership and innovation. The company's products are sold in the United States, Canada, Australia, and Europe.

      Headquartered in Maine, Malone creates products built to enhance enjoyment of rivers, lakes, and oceans, while minimizing carbon footprints through aerodynamic transport design and complete material recycling. The company can be credited with a number of innovative industry firsts, including:

      • First J-style kayak carrier
      • First unique "boarding ramp" on a J-style carrier
      • First universal fit system allowing consumer to mount Malone products on any type of cross rail
      • First corrosion-free injection molded composite carrier that will "flex to fit" your watercraft, providing added protection and security

Jeffrey McElroy
Reviewed in the United States on April 3, 2023
I go to build this trailer and it’s missing the wiring harness, lights etc . Not pleased with this purchase!Edit: The company immediately sent the needed parts. The trailer was perfect !
Captain Lou
Reviewed in the United States on June 20, 2020
I’m so happy I bought this trailer. I hemmed and hawed for several years before taking the leap. I just got tired of loading the kayaks on top of my SUV. It got to the point that I went less often due to the hassle. This trailer makes it a breeze.Assembly was OK. About what I expected. I received my shipment of boxes spread out over 3 days. Thankfully, I received the frame parts first so I could start assembly and complete as I got the other boxes. I believe there were 5 total. Taking my time and reading directions multiple times before proceeding, it took me about 4-5 hours spread out over 3 days to assemble. I was in no rush.The instructions were clear with good pictures for all the important steps. Towards the end of assembly, there were a couple steps that I was unsure of and were less clear but I was able to figure it out.I already owned the Malone mounts so I didn’t need to purchase a package with those included.As far as what configuration to purchase, I went back and forth between the aluminum vs galvanized. The selling point on the aluminum was the retractable tongue and ability to store it upright. As it turns out, I would have been just as satisfied without the upgraded pieces. In order to stand it up, you need to disconnect the wiring harness, slide the tongue back, resecure it and then lift the trailer onto the runner bumpers. I attempted this but it seemed that my J hook mounts in the rear were preventing it from standing in a stable fashion. Since that seemed a little dangerous without additional fastening against a solid structure, I gave up on storing that way for now. Instead, I just leave the kayaks on and I’m ready to go at anytime. Unfortunately, it also means I’ve lost garage space. Not sure what I will do in the winter, yet.The trailer itself is very solid and tracks nicely behind my car. I have no fear pulling it around but haven’t taken it on the expressway yet. Love the LED lights.Overall, extremely happy with the purchase and would do it again. Most likely would just get the all galvanized version with standard tongue but I don’t feel cheated with this version either. It has removed the only downside to kayaking.P.S. The seller I purchased from, Outdoorplay, was outstanding. I contacted them due to the delay I experienced with a couple of the boxes. It was all on FedEx but they were extremely quick to respond to email and very thorough and willing to assist in their response. It wasn’t just a canned response of ‘wait 2 weeks and if you still haven’t...’. They genuinely looked into it with Fed Ex, provided details on my shipment and offered to fix it if I didn’t get the final parts in a couple of days. Will definitely look to do business with them again.
Customer
Reviewed in the United States on September 29, 2018
1. Amazon delivered in less than a week, no damage at all.2. Directions are clear. READ them start to finish in advance, then read them a second time. It will eliminate silly mistakes as you execute the build.3. I built the trailer in a garage in one day, roughly 8 hrs. If you can change the oil/filter on your car, you can do this.4. I looked at the Rack-n-roll trailer as well. The Malone is significantly heavier. That may be a drawback when moving it around your yard or parking lot, but it tracks like an arrow on the highway, and I've loaded it up with items a lot heavier and less aerodynamic than 2 17' sea kayaks. It is tough and stable. Before you lament the cost, I have noticed dozens of places this trailer COULD have been made cheaper. The hardware is excellent quality, the frame is solid as a rock. No twisting, no rusting no stripped bolts.5. Company support was stellar. I laid out the parts prior to start, and could not find 2 large structural members. OK, this is not my proudest moment; the Malone contact informed me that the missing parts were tucked inside other larger parts.6. I added large 6" wheels from Home Depot on the rear cross member so that I can tip the trailer up on end and roll it into a storage location. I also added, and recommend adding; a spare tire, the Malone box (perfect fit), and I added a plyboard shelf in front of the box.7. I recommend two modifications that I will be doing this winter; change the tail lights to LED, and enclose the wiring harness in either light hose or flexible plastic tubing.8. I've been using this trailer primarily to haul sea kayaks on weekly trips to the coast for 2 summers. I hose down the trailer after each trip. No signs of rust yet. I have the aluminum wheels and love them.9. One build/maintenance suggestion: There are a few nuts/bolts that are tough to access with either a standard socket or an adjustable wrench. I am looking for a thin walled extended socket (same idea as a spark plug socket) to easily reach those items. You should also recheck those fasteners at the beginning of each season. I had to retighten several of them this spring, and was very surprised that was needed.Satisfying build experience, extremely useful, good quality, excellent customer support.
Customer
Reviewed in the United States on July 13, 2012
We bought this malone trailer because we love the malone line of products. However, this should say that it is a KIT! It is not assembled. The instructions were poor (in many areas they did not tell you which size nuts or bolts to use. The black and white picture were hard to see and I had to go to the website often to see the brochure in color to view it better. Instructions were also weak in the area of telling you if the nut should be on the inside or outside. Some of the pictures showed a close up of the area but did not show a overview shot so you would know where it goes.If you purchase the storage trunk make sure you assemble with it or else you will have to take apart the entire wheel frame to fit it in. Even then the holes did not line up due to the frame of the trailer.It took over 15 hours for 2 people to assemble. There are no Malone Videos for assembly which would have helped.If you are handy with tools and have more then a wrench and a screwdriver This is a Great trailer. Too expensive for a kit! Storage trunk is very small just fits 2 life vests and 2 dog life vests not even long enough for folding camping chairs.Have not put our two Kayaks on it yet. With the amount of assembly, I thought they should have paid us to buy it.