Your cart is empty.
Your cart is empty. Haojiaho heatsinks are widely used in laptops and desktop computers, providing cooling effects for precision equipment, internal motherboards, CPUs, etc.
【Package include】
1PCS heatsink
1PCS thermal Pad
Some Rubber Rings
Size: 67*18*1.5mm (2.637"L*0.708"W*0.059"H)
Please check the space for heatsink before purchase.
【High Compatibility Design】
This NVMe M.2 SSD heatsink is compatible with M.2 2280 SSD. In addition to M.2 SSDs, this pure copper heat sink can also be used with other heat generating devices such as PS5, Nintendo Switch, and smartphones.
【100% Copper Material】
Adopts high quality pure copper material, the thermal conductivity of copper is much more efficient than aluminum alloy, and the groove design greatly increase the heat dissipation area, the accumulated heat can be released into the air faster.
【Silicone Thermal Pad Included】
In order to maximize heat transfer on the contact surface, a low-viscosity, high-thermal-conductivity thermal pad is included to be installed between the M.2 SSD and M.2 heatsink, providing flexibility in installation, and enhances the cooling effect.
【5°C-20°C Cooling Effect】
Thin design of only 1.5mm, so it can be installed on most computers without interference.
With a cooling effect of 5-20°C (depending on the environment), it can cool your M.2 SSD, maintain reliable data transfer speed, and improve the performance of your SSD.
【100% Satisfaction Guarantee】
Haojiaho is committed to providing customers with high quality products and service. Customer satisfaction is our top priority. If you have any issues (including damage, functionality issues, missing items, incorrect colors, or package non-receipt, etc.), please contact us in time to get a new replacement or refund, and we will reply to you within 24 hours.
Jpaudio
Reviewed in the United States on February 7, 2025
They work fine they kept my SSD cool
Norman
Reviewed in Germany on February 28, 2025
guter Kühl Körper !
のお客様
Reviewed in Japan on February 23, 2025
よく冷えています
Jlk311
Reviewed in the United States on February 21, 2025
The heat sink is good. The adhesive is… well is it even adhesive at all? Because it doesn’t stick at all.
DurzoBlint
Reviewed in the United States on February 12, 2025
I had a spare 2TB NVME that had a massive heat sync on it. I wanted to put it in my Ally Extreme (non-x), where I already had the 90 degree adapter to go from the 2230 to 2280 NVME.My previous 2280 (that didn't have a heat sync) had died. After stripping off the huge heat sync from my spare and putting it in the Ally, I noticed that temps were way too high. I ordered 2 different heat sync plates to try. This one, and another one that was just a solid thin plate. I was hoping to use this one because of pattern creating more surface area. But I was worried it would be too thick for the Ally. I did have to snip a small section of a support post off of the back case of the Ally, but this heat sync fit perfectly. And it took the temps down to a reasonable level. I'm very happy with it.
Omar R.
Reviewed in the United States on February 1, 2025
Looks good. The adhesive on the pad was not good, but it also come with about 5 clear bands to hold it fast to the SSD.Here it is installed on the RayCue Mac Mini M4 docking station.
評論家
Reviewed in Japan on January 7, 2025
ヒートシンクを調べていてたどり着きました。熱伝導率は銀の方が優秀ですが、市販されている商品はアルミか銅が多いようですね。なので銀に次いで熱伝導率の高い銅を使用した製品を選択しました。今のところＳＳＤの動作に問題は無く、仕事をしてくれているのかはわかりませんが、見た目もいいので気に入っています！
JJA
Reviewed in the United States on January 19, 2025
Anchor method is a little weak but it gets the job done. Does a good job keeping drive cooler, wasn't hard to install. Just don't expect any instructions there aren't any,lol.
DOH
Reviewed in the United States on July 18, 2024
Works great in tight installations where you have another NVMe next to it. As long as you have the clearance above it you will have no issues with the installation. It cools the drive efficiently and makes a big difference.
Patric
Reviewed in the United States on December 31, 2024
Works great and fits in my Asus a16 gaming laptop.
まる
Reviewed in Japan on December 29, 2024
純銅製のヒートシンク（6mm厚、M.2 SSD冷却用、サーマルパッド付き）を購入しました。まず、銅製のヒートシンクを探していた私にとって、こちらの製品はまさに理想的でした。実際に使用してみると、予想以上の放熱性能に非常に驚きました。M.2 SSDの発熱をしっかりと抑えてくれたおかげで、安定した動作環境を実現でき、大変満足しています。もし今後、同様の用途でヒートシンクが必要になった際には、またこちらの商品を選びたいと思います。素晴らしい製品を提供いただき、ありがとうございます。
ホット石川
Reviewed in Japan on December 19, 2024
初めて購入しました。今のところ問題なく使用できています。
Customer
Reviewed in the United States on November 2, 2024
Perfect to use is small form factor builds, I have it mounted on the rear of my board.
Recommended Products
