Your cart is empty.
Your cart is empty.
- Detection Object:Can detect any dielectric.
- Delay Distance:10% below of the detection distance.
- Supply Voltage:DC12-24V(6-36V) Impulse (p-p)10% below.
- Comsuption Current:13mA below.
- Control Output:300mA below.
- Loop Protection :reversal connection protection,surge absorption,load short-circuit protection.
- Ambient Temperature & Humidity:During operation , storage : individually-30～＋65℃(no freeze ,no drew ) ,During operation,storage:individually 35-95%RH.
- Insulation Impedance :50MΩ above ( DC500 megameter ) between charging part and shell.
- Withstand Voltage : AC1000V 50/60Hz 1 min. between charging part and shell.
- Temperature Influence : Temperature range-30～＋65℃,at + 23℃,± 15% detection distance, Temperature range-25～＋60℃,at +23℃,±10% detection distance.
- Voltage influence : Inside ±I5% rated supply voltage range,at rated supply voltage value ,inside ± 10 % detection distance.
Jerry
Reviewed in the United States on December 18, 2024
Received item in good condition - fast shippingThese M18 proximity sensor performed very well in my test,Operated well in the voltage range I tested it for - 10vdc - 15vdcHad no problem short term current of 158ma,Worked perfectly, did not even need to adjust sensor gain, maybe something that should be checked,Picked up wood at about 3/4 inch the way it came set, I will be using it for sawdust, so will update review if any problems later,For now I would have to recommend product as an inexpensive alternative to much more expensive sensors like $100-300 Allen Bradly but never for industrial as reliability is to much a concern,Would also for longer life if it is an option to use it at the low end of voltage rating, excellent for the hobbyist or for a wood working sawdust silo,
Alberto Villuendas
Reviewed in Spain on December 17, 2024
ya habia comprado otro
Fabiana Mendes
Reviewed in the United States on December 16, 2024
This was what I needed. NPN 10-30VDC. This sensor has good accuracy, a light that signals when it is on and sensitivity adjustment. The diameter is M18, with 2 nuts for fixing. The cable has 3 wires for correct installation.
Mr Abercombie
Reviewed in the United Kingdom on September 30, 2023
The device is constantly 'on'. Control LED constantly on.
Recommended Products
