Shopping Cart

Your cart is empty.

Your cart is empty.

Low Profile Dust Separator for Wet/Dry Shop Vacuums, 99% Efficiency, Included 90° Adapter and 2.5' Hose, Attaches to 5 Gallon Buckets in Seconds, Maximum Suction

Free shipping on orders over $29.99

$44.99

$ 22 .99 $22.99

In Stock

About this item

  • COLLECTS VACUUM DUST WITH 99% EFFICIENCY TO PROLONG FILTER LIFE - The Delmar Tools dust separator separates over 99% of vacuum dust into a 5 gallon bucket, keeping your filter clean and your vacuum running for longer. Allows for extremely easy cleanup.
  • LIFETIME WARRANTY AND USA BASED CUSTOMER SERVICE - If the dust separator ever stops working properly or is damaged, it is covered by a lifetime manufacturer warranty unlike competitor versions. Our USA based customer service is here for our customers!
  • INCLUDED 90° ADAPTER AND HOSE UNLIKE COMPETITOR VERSIONS- The Delmar Tools dust separator includes a 90° adapter and 3 foot hose for various assembly options, unlike others on the market. The hose and dust separator have standard 2.5" openings.
  • NO ASSEMBLY REQUIRED AND ATTACHES TO 5 GALLON BUCKETS IN SECONDS - The Delmar Tools dust separator clips onto any standard 5 gallon buckets allowing for extremly easy setup. Ready for use in seconds -- no drilling, screws, or assembly required like competitor dust separators!
  • RUBBER GASKET AND TIGHT SEALS FOR MAXIMUM SUCTION - Each dust separator has a sturdy rubber gasket to provide the tighest seal possible to maximize the suction from your shop vacuum. Maintains the strongest suction possible from your vacuum.



Product Description

xs
kk
kh
cdd
h
kkk

E.T.
Reviewed in Canada on February 13, 2025
Tuyau noir pour rejoindre l'aspirateur est un peu court, dans le genre très limite pour fonctionner.Prévoir en acheter un autre pour être utilisé avec un 5 gallons. Moi j'ai une demi chaudière de 2.5 gallons et ça faite de justesse.
BEK
Reviewed in the United States on February 12, 2025
Clips wouldn’t close on rim of my bucket but unit stayed in place without themIt worked superbly. Filled five gallon bucket with sawdust in minutes with next to nothing reaching the vac. Exceeded my expectations and I am going to buy a second one
Gary Jonsohn
Reviewed in the United States on January 30, 2025
The picture show where I’m now storing the unit - garbage can. One of the worst products I have purchased. The rubber gadget doesn’t fit or stay in place. It’s made of very brittle plastic. Hard to remove from pail.
Dough2488
Reviewed in the United States on January 28, 2025
I'm giving this 4 stars only because the bucket can be hard to control once hoses are attached. I will think outside the box to build a container or enclosure on 4 casters to roll around shop with me. Product works well. Separates as it should. Easy, lightweight, solid product, almost 5 Star worthy.
Linda
Reviewed in the United States on January 17, 2025
The dust collector not only does a fantastic job, but the company behind the product is even better. I had an issue with mine. It was purchased Black Friday time frame. I didn’t get to use it until mid January. Since it was past 30 days I researched the company and it said lifetime warranty. So I contacted them on their website. I got a response to my email in less than 5 minutes. It wasn’t one of those ‘we received your inquiry’ kind of email. It was this: “hi John. We will fully replace your broken item. I will send one to you asap. What is your address?” No hassle. No questions. American company standing behind their product. I had a new one on my doorstep 3 days later. Not sure who jack is but he deserves a raise! He was a 10 star customer service savant. Will buy their products again. No doubt. Thank you Delmar Tools!
Pictureman
Reviewed in the United States on January 13, 2025
I had an issue with the lid, but Seller was quick to respond and correct the issue.The Dust Separator does a good job. I should have purchased one years ago, but I was suspect of the on bucket design. The regular dust separators were too large and much too expensive. I found the on bucket to do a good job for DIY without the size and expense issues of "real" separators. Of course the "real" ones can handle multiple feeds and long distances and probably do a better job as this relies on the power of your shop vac.
Gus
Reviewed in the United States on March 7, 2024
I ordered one of these a while back and it worked so well that I bought a second for another tool. When I went to put it on the bucket the side wall instantly cracked. It is not unusable and a piece of duct tape was all that was needed to fix it. The product it self works very well it is just unfortunate that the material isn't higher quality.
mr. opinionated
Reviewed in the United States on July 30, 2023
In my small wood shop, I needed to continuously clean the filter in my shop vac. I lathe a lot and the dust and shavings would clog the filter faster than a meal from a questionable eatery would run through your digestive tract.Use is simplicity in itself. All that is needed when you purchase is a 5 gallon bucket that you get at hardware stores for paint and such. Simply place the dust collector on the bucket, attach the hoses and that's it. The hose size matches my vacuum perfectly. Please verify what size hose your vacuum has prior to ordering in the event you possibly need an adapter.Pros:Easy to useWorks great (barely anything makes it to the vacuum to clog up the filter)Low costCons:Very light. (easily gets dragged out of position when you try to move the hose from one machine to another)Plastic construction could fail fairly easily if misused. (hose got blocked a few times and I am surprised the unit did not crack from the sounds it made trying to compress itself onto the bucket)Can't seem to get it to snap all the way on the bucket. (This could be due to the bucket itself but it has not caused any operational issues.)In the end, I would recommend to small shop owners on a budget. It will help keep your shop vac cleaner and suction will not be impaired by a clogged filter. I could see this possibly being used when performing other shop vac functions as well.
KarenIdaho
Reviewed in the United States on March 16, 2023
This surpassed my expectations on how well it worked. I promptly dropped it on the floor and one of the attachment tabs broke off. I contacted Delmar and they shipped me a new one the next day. If your looking for a great dust separator for your small shop then this is the unit you need. It works great and customer service is over the top. I had a DIY unit I made from a couple of 5 gallon buckets but it really restricted the air flow. I saw this unit or one like it on YouTube and decided this was a much better idea and took up a lot less floor space. I saw cheaper units but I liked that you can see this working.
Jäggėr
Reviewed in Mexico on July 9, 2022
El producto funciona muy bien, se acopla perfecto a cualquier cubeta de 20 lts, el único pero es que su construcción no es muy robusta, se siente un tanto frágil, pero solo con tener un poco de cuidado al montarla y desmontarla de la cuneta, creo que durará un buen tiempo.Su funcionamiento en mi taller de carpintería es muy bueno, ha logrado mantener el filtro de mi Shop Vac, prácticamente como nuevo
dfx
Reviewed in Mexico on April 25, 2022
Es muy simple de utilizar y de armar, solo ocupas una cubeta de 5 galones (una que tengas de pintura preferentemente ya que están mas gruesas y aguantan mas la presión de la aspiradora que las de la tienda naranja), conectas la manguera que viene incluida a la aspiradora y la manguera de la aspiradora al conector lateral de la tapa y de ahí a tu sierra, lijadora, etc.Como pueden ver en las fotos separa prácticamente todo el aserrín, solo pasa a la aspiradora el polvo muy fino, que en el caso de mi aspiradora el filtro es lavable, pero si ven el fondo de esta, esta casi limpio.Les recomiendo que compren la tapa que incluye la manguera y el codo de 90°, no es mucha diferencia de precio y es de buena calidad, esta manguera es de 2.5 " y conecta muy bien con la entrada a la aspiradora.