Your cart is empty.
Your cart is empty.The 4-inch round Wafer™ LED Downlight with Switchable White provides high-quality light output and efficiency featuring a switch for easy color temperature adjustment from warm white to daylight during installation - while eliminating the need for recessed housings. The innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. The Wafer LED downlight is wet location listed – making it ideal for use in a breadth of outdoor residential, hospitality, commercial and multifamily applications.
SN-3
Reviewed in Canada on November 7, 2024
Had to replace a pot light and this was an exact match with multiple light intensity settings that 14 other identical pot lights in the ceiling have. It is otherwise often noticeable when the led pots don't match up ... glad this was conveniently available on Amazon The wafer hold-in clamps are like mouse traps with the fingers and get me every time - ouch - LOL
david
Reviewed in the United States on November 23, 2024
replaced three old lights these are MUCH better easy install
Customer
Reviewed in Canada on April 14, 2024
Product was exactly as specified.
steven s.
Reviewed in Canada on December 28, 2023
Good quality, easy to install!
Customer
Reviewed in Canada on December 7, 2022
The perfect light fitting for brightening up a hall way, light weight, easy to install and very bright
T. Nooen
Reviewed in the United States on July 1, 2021
I tried all 3 brands, LIthonia, Juno, and Cloudy Bay based on my preference for 3500k color temp and lumen output. The benefits of the Lithonias are:1. Color accurate. At 2700, 3000, and 3500 they were all spot on with what I expected. Next to Juno at 3500 and Cloudy Bay lights, Lithonia was the most color accurate of the 3 outputs it was capable. Followed by Juno and then CB. CB is great if you want 4000k but all others just didn't look right.2. Quick Connectors. These have quick connectors that just allow you to insert the wires and go. No twist connectors and makes installation a breeze3. Large box. Juno comes in the same size box, but the latch mechanism just didn't hold and would pop out if the wires weren't deep in the box. CB has a smaller box with much less room to work with.4. Large spring clamps. The clamps on these were big and allowed the force to spread out more. Good for the drywall applications where the spring clips might damage the dry wall. Juno doesn't come with plastic caps on theirs so you're much more likely to damage. CB came with plastic cabs, but they were shorter and almost excessively strong (and more damaging when I took them out to replace them).Cons: lamp cover doesn't allow much room for error so be sure to get the right hole saw. Juno was the most spacious. CB was on par with Lithonia and left little room for error.Update 7/2021: These do no work well with smart switches. I’ve tested these with Inovelli and GE Enbrighten and the experience has been really poor. Lights flickering
Benjamin
Reviewed in the United States on October 8, 2021
I’m an electrician and we install these wafers in every living room, kitchen, master bedroom, and exterior decks on all of our new construction homes. They are so easy to install (4 1/8” holesaw is perfect size…or just trace template and cut out by hand with a jab saw)! Because of their extremely low profile, they can fit almost anywhere! They can even be installed if your home is partially blocked by a truss as long as you can slide the driver in!! They come with soldered ends already in a push-in wire connector making your wire connections an absolute breeze! The color selectable feature is the icing on the cake as it allows us to meet various customer needs depending on their light preference! These are also dimmable, and work flawlessly with a lutron LED dimmer.A few months ago, our local big box store stopped carrying these. Thankfully our supply houses still had them, despite the markup in price. Sadly, our supply houses don’t carry them anymore either. Apparently there was a buyout and these Lithonias are now made under the “Juno” brand. The Junos not only cost more, but are TERRIBLE quality compared to these!! Flimsy junction box, no push-in connector, less lumen output, quality control with their selectable switches often not working.When I learned these aren’t being made anymore, I quickly snagged some for my personal home to ensure I don’t get stuck with the Junos!! I put a 6” over my showers, 4 4” wafers in my living room, and 5 more for my kitchen. These are so easy to install that even my 9 year old son was able to do it after I got them cut in and wire ran!I would encourage you to snag these now while they last!! They’re awesome!!
ARK
Reviewed in Canada on March 2, 2019
These lights are very easy to install and the 3000k is a perfect colour. They are brighter and flicker free, unlike the ones I am returning to H.D. tomorrow. Great quality for the price.
robert crowley
Reviewed in the United States on February 18, 2019
These are super simple to install. The look is very high quality. The push-in connectors make everything a snap to do. And the springs that hold the lights flush to the sheet rock are very strong. 6 lights, so 12 springs, and all of them are consistently super tight. I've seen some negativity surrounding this, but my experience has been superb. Also, considering the cost of these, I thought there might be some inconsistencies with the color and light output. They are all exactly the same color, and the all maintain the same light output on the dimmer they are hooked up to all the way from full blast down to where they all turn off at the same time. (infinitely adjustable dimmer) I know this seems like what you'd expect, but I've seen, and still have, some whose light output is less consistent. I could not be happier with this purchase.If I had any issues, it would be that there is only slots for 2 wires in each push-in connector. Perfectly acceptable if the power comes in at the start of the series of lights, but I started mine in the middle of the series, so I needed a power, left run, and right run wires. So I did end up needing to cut the connectors and wire nut one set of connections. But really.... that was minor considering the rest of what I consider to be an excellent value.
Clint Hart
Reviewed in the United States on April 11, 2019
So I’ve installed the classic can lights before because I was worried about the LED technology and price. But now that I’ve done both can and canless I don’t think I’ll ever go back. One challenge with recessed cans is making sure there’s enough space above the light. I always seem to cut under some AC return line or some random cross stud/joist. And if I can’t relocate the obstacle I end up patching the hole and moving the light and then my lights aren’t all evenly spaced. But that’s not an issue with these lights. They’re canless and require like less than an inch of clearance. And the little junction box/housing is also small and easy to manipulate. They can do this cause there’s no bulb. It’s just this flat crazy LED technology. Super impressed with the brightness too. I put four 6” lights in a bedroom and it was plenty... maybe even over kill. And the light is a much more brilliant true white light vs my traditional can lights which I’m realizing now have more of a yellow hue to them. Makes me want to replace all the lights in my House. One thing to remember, without the recessed can it’s a little messy. Between first and second stories not so much but with a roof above it it’s a little messy with the insulation. Overall it’s a great product and a great price.
Recommended Products
