Your cart is empty.
Your cart is empty.Product Description
MommyTerrie
Reviewed in the United States on February 26, 2025
Quick dry clear and low bubbles. Just as described.
Martha A. Herrod
Reviewed in the United States on February 26, 2025
I love this resin. I have tried several different brands but Let's Resin works best for me. I am always pleased with the results that I get from this brand and will continue to use it. Thank you.
Devlyn L
Reviewed in the United States on February 24, 2025
The media could not be loaded.
BEvans
Reviewed in the United States on February 2, 2025
This is a great product and exactly as described. I will be ordering more, but in a larger quantity. The item was shipped on time. It’s easy to work with and has a beautiful clear finish.
Sonia Martínez
Reviewed in the United States on January 26, 2025
I absolutely love this epoxy resin it has good work time no bubbles very clear works well with all the mica powders I've used. Doesn't stick to any of my molds doesn't over boil I just love this product all the way around everything about it and it doesn't have a high odor.
Don W.
Reviewed in the United States on May 24, 2024
I've been a furniture maker for years, but I'm new to resins. I thought I would try a table top project before working with a deep pour product. I did a lot of research into different resins to find a material with low toxicity and consistent results. I think this will be my product of choice! I did a number of tests with pure resin and adding some of the alcohol dyes and I was really pleased with the results right from the beginning.I did single and multi coat pours (sanding between coats) and each pour consistently hardened in just under a day (about 60 degrees in the shop). It let me embed small elements in the pour and the transitions between layers were invisible.Edges on my tabletop were clean and the resin had the right viscosity to flow and smooth out but could cling to vertical surfaces well.What I liked:1. Mixing was easy with the 1:1 ratio of resin to hardener.2. Very little odor.3. Remarkably clear and durable final finish.4. Reasonably priced and a great way to get started with the medium.Please note.Even though it's low odor, all resins must be used in very well ventilated spaces while mixing, curing and during any sanding or planing. Use proper respiratory and eye protection recommended for the process.Also gloves and protective covering should be used to avoid skin contact with uncured resin.
Customer
Reviewed in the United Kingdom on February 3, 2024
You won’t get what you see on the photo - which is the particular Daniel Cooper formula - that’s what I specifically wanted. I have a feeling this old formula may not longer be available but this product photo is misleading. What arrived was what I think is the new formula and no mixers or cups! That leaves me having to adjust my sinker which is precisely what I didn’t want to do :(
JCha
Reviewed in the United States on February 1, 2024
This resin is really easy to use, is odorless and mixes well with all sorts of additives. The reason I gave this a 4**** is because in the product page it says it cures in 8 hours but for what I make with it (keychains, earrings, coasters, etc.) it needs at least 12 hours, sometimes longer, sometimes a little less.
Jerome LaFreniere
Reviewed in the United States on April 30, 2024
The main complaints about epoxy resin are...It turns yellow. It has bubbles. It does not cure. I have used many brands and I really like this stuff for both art casting and coating. After about 24 hours a 1/4" thick casting is still a little bendable, but the next day it is very rigid and strong.UV TEST IN AZ SUMMER. I put a 1/4" x2x2" clear square that I cast in a latex mold in 100 + sun for 6 months and it was still pretty darn clear with no yellowing. Measure correctly, mix well and you will get a nice, bubble free casting or coating. Buy a cheap concrete vibrator ,bolt it to the bottom of a sheet of plywood and screw the plywood sheet to an old tire to make a monster of a vibrator if you are doing large, thick casting and worry about bubbles .Great resin and great price in my opinion.
Customer
Reviewed in the United Kingdom on July 3, 2022
Edit: after my initial review Let's Resin got in touch with me and offered a new bottle, which I really appreciate. They confirmed there was a mistake and have changed the volume description to match the amount actually received.I will also add that after my initial use I haven't used up the remaining resin yet and after two weeks it's still perfectly fine! No sign of crystallization, no thickening of Part A, it's still the same amazing quality as it was on the day I opened and used half of it. I am definitely going to get more of their epoxy resin. I have changed my 3 stars to 5 star review, because it's well deserved for amazing resin quality and wonderful customer service.Original review: Ok, so I will start with the fact that the resin is amazing quality. It's beautifully clear with no crystallisation. Another resin I've been getting until I tried this one would arrive cloudy (always part A), or already partially crystallised, which is why I am testing and trying more brands. This resin is bautiful, can't complain here in any way.Now here comes the issue. The size of the bottle looked suspicious to me as it was on arrival, so shouldn't be as annoyed as I am about this really, butI plan my resin work per ml specified on bottles, or pages I get them from. This resin claims to be 11.5 Oz per bottle. When using the conversion online 23 Oz is 653ml, so already not as described. Decided to plan things out to cover 640ml just in case and decided to split it in half, so half the amount on day one and half on day two. Last night I poured 3 of the 5 planned items and have less than half the amount left, as pictured. The other items would take up 20ml between them. So using simple math, there is about 590ml in these bottles, at a best guess considering I have just under half left and used 300?Oh and for those having issues with it setting and remaining sticky. Measure by ml, not by weight, as the liquid weight can vary due to viscousness of the parts (one is thicker and can be heavier). It's also better to mix bigger batches than 10-20ml at a time, as the difference in the poured liquid will be a lot less significant and will set fine. In smaller batches, even a 1ml difference either way can make a change and it won't set properly, which is also why I plan to make more than one item at a time.
Monika
Reviewed in the United Kingdom on July 14, 2022
I am very happy with this resin. Since I bought it for the first time, now I always buy. I highly recommend.
Recommended Products