Your cart is empty.
Your cart is empty.Product Description
Tips to Avoid Sticky/soft Resin
1.Accurate measuring. Following the correct 1:1 ratio by volume.
2.Mixing resin properly. Mix slowly for at least 3 minutes. Be sure to scrape the sides of your cup for equal mixing.
3.Do not curing in cold temperatures.
4. Do not added too much resin colorant. never add more than 6% of the total combined volume of resin and hardener.
Tips To Prevent Resin Bubbles
1.Warm your resin before casting.using a water bath to warm it
2.Mix resin slowly.
3.Let the resin sit for 5-10 minutes before pouring.
4.Make sure the surface you are pouring your resin in or on is also warm.close to the surface of your piece and pour your resin mixture out slowly.
5.Work in thin layers.we recommend pouring in layers, waiting 3-5 hours in between each layer.
Zdspoxy clear casting resin allows you to create beautiful pieces with a glass-like and bubble-free finish, completely free of imperfections.
Trying to find clear epoxy resin that is self-leveling, self degassing, and resistant to turning yellow? Our resin is the best choice.
Easy for Beginners and Pros
It's easy to use, pours and mixes easily. 1:1 self-leveling formula,no polishing required.
Mixes well with colorants
With excellent color retention. Mix our resin with mica powder, resin tint, glitter and alcohol ink to create one-of-a-kind pour creations.
Molds friendly
Compatible with silicone molds,especiallyZdspoxy molds,the heat dissipation will not be too high to damage the molds.
Multi-application
Perfect for all kinds of DIY projects, casting jewelry, coasters,petri dish art,or coating tabletops, acrylic to paint pouring art.
Durable and Longevity
Compare to others, Zdspoxy epoxy resin can resist yellowing for long-lasting, keep your project clear and transparent all the time.
Quick Curing
Made of premium resin and hardener,the finished product can be demolded after 8 hours ( 77℉- 85℉) and fully cure in 24 hours.
Our epoxy resin is specifically designed by advanced technology.
Tommy Dunham
Reviewed in the United States on June 26, 2025
Why did you pick this product vs others?:Great
Carol Richardson
Reviewed in the United States on June 16, 2025
These works very good made pill holders with these will order again
Jeffrey
Reviewed in the United States on March 30, 2025
Worked well and lasted a long time. Very low oder. Not the hardest if not sitting properly. Also not super heat resistant.
CaTs
Reviewed in the United States on June 26, 2020
I love this resin. I’ve used many different brands over the past two years. Ultimately for me it comes down to finding a resin that is affordable but provides quality results. This resin is it! I’ve used it for a variety of projects from coasters, wall decor, trays to table tops and more. I’m impressed every time. It’s easy to use and very effortless to achieve clear, glossy, bubble free pieces. These products are measured by weight and the bottles are generally larger than the volume of the liquid (in response to the review complaining about the level of liquid), I weighed both of my bottles and they were spot on (even more) than the labeled kg. This resin has a long work time which is awesome!! Much longer than I’m used to which is great, I don’t waste any resin and I’m able to create more detailed pieces and not feel like I’m in a sprint to finish before the resin turns to garbage. This resin provides well over 30 mins of work time, I didn’t time it but I’ve taken my sweet time on some pours and this resin was perfect from start to finish. Thinner pieces take longer to harden and remain more flexible, I’d say over 24 hrs to harden enough to remove from molds and then an additional day or so to fully harden. But they will harden. Thicker pieces harden in less than 24 hours. All of my pieces have cured to gorgeous smooth, level, clear, glossy pieces and I am so happy every time. I love that this resin doesn't get hot too! It appears to be self-leveling and getting clear bubble free pieces are easy. It does have an odor, a strong odor during mixing but that goes away once poured. You should also be wearing ppe! (NITRILE gloves, a respirator for organic vapors, eye protection, apron, etc!) If anyone has issues with this product I’d suggest first that you research tips and how-to’s on using resin with the best results first before blaming the resin. You need to pour your two equal parts, pour the hardener into the resin, mix SLOWLY for 3-5 mins, pour into a clean cup, continue mixing for a few more minutes. The resin will get cloudy and streaky when you start mixing, keep mixing until it is totally clear and like water. Then you are ready to pour or add in your tints/dyes/pigments/inks/glitters/whatever you’d like. I’ve added some pictures but have tons more of what I’ve created with this resin. I’ve switched to only using this resin. Really happy with this brand!!
Jessica Young
Reviewed in the United States on November 19, 2019
I am very pleased with this brand of resin. Now one of my top choices and WILL buy again. My process and experience as follows;I used the resin both warmed and not warmed and both experiences were very similar. When warmed (only a few degrees above room temp) the pour was smooth and the mixing went smoothly as well. A few bubbles when mixing but they all disappear when pouring. No strong smell. Feel fine without safety mask and felt safe letting it cure in my bedroom because of lack of smell. Bubbles were very minimal and disappeared quickly. Bubbles in final cured pieces were near none (two of my more finicky molds had one bubble each. Easily fixed and no big deal.) The reason I mention this is because this brand of resin has the LEAST amount of bubbles out of all the various kinds of resin I have used. The resin and hardener are very clear before, during, and after pouring (mixed clearer when warmer). At the point my pieces were half cured I checked on them and they were still tacky so that would probably be the ideal point to add heavier items so they can sink in (I did not personally test this but plan on quite a few more various pieces, so will have more updates in the future.). At about 3/4 cured I popped my pieces out as they were a little bit bendy still. I used a razor to clean up the pour edges. Having the resin not fully cured when you shave off the edges works great and avoids doing the hard edges later. I laid all my pieces on my tile and let them fully cure. They looked great! I had matte molds and shiny silicon molds to use so some of the pieces took on the matte finish of the matte molds (I will post pictures). When they were cured I was very pleased. Very clear, no bubbles inside the piece at all, so this resin would be perfect for simple botany pendants with plants/insects/ect where no mix in pigments are used. Cured HARD. Pieces are very sturdy and can withstand some rough handling. The shiny pieces are very smooth and look perfect. Did not use gloves and had no reaction throughout the entire process. Resin that got on my hands wiped off easily with a paint rag. Resin shavings from the razor touch ups did not make me have a skin reaction. This brand boasts being food safe, I have not personally tried it for that purpose but might post an update with something food related. Will be posting continual updates on this product. Definitly recommend. Easily 5 stars. (My first resin session had mix ins of metalic mica and fine glitter. Simple mix. The bigger glitter bits sunk to the bottom. Not everything sunk to the bottom so I was pleased with that as well).
Recommended Products