Your cart is empty.
Your cart is empty.Product Description
120V AC to 12V DC Transformer for Low Voltage LED Lighting
LED Driver 12V Feature:
- 110V 120V 130V to 12 volt dc transformer with 30 watts or 60 watts has a ultra thin appearance, with a thickness of only 16.5mm/0.65inch compact design, minimalist aesthetic , does not take up space and is easy to install.
- Easy to install and wire up, Insert the wire into the appropriate terminal holes and tighten down the screws. Afterwards cover the terminals and tighten down the screws.
- High quality LED transformer for stable output and no flickering after connection. LED driver has good immunity to interference.
- IP44 waterproof rating, the Shell is made of plastic and can be protected against dust and humidity.
- LED power supply has built-in thermal overload and short circuit protection.
- The led strip light power supply compact and slim design, miniature in size, well insulated.
Lighting Transformer 110 to 12Volt Constant Voltage
DUSKTEC LED Power Supply Driver
- Brand: DUSKTEC
- Product Name: LED Driver/ LED Transformer/ LED Power Supply/LED Converter
- Sub-Name: Slim led power supply 12v 30w /Slim led power supply 12v 60w
- Material: ABS Plastic
- Input: AC 100-240V
- Output: DC 12V
- Frequency: 50/60Hz
- Power: 30W-2.5A , 60W-5A
- Protection: OVP / OTP / OCP / SCP
- Certifications: ELC，UKCA , CE , FCC，FCC，
- Size: 131* 50 * 16.5mm(30W) , 162 * 50 * 16.5mm(60W)
AC to DC Adapter, PSU Constant Voltage
Safer Design
LED Driver is fully insulated,miniature in size， simple to install and safe .
Screwed connection ports for variable pressure for safety and convenience
Flat and Thin Circuit Boards
The latest flat design inside the transformer. Performance will be more stable
Multiple Protections
The transformer has built-in protection against overheating, overload and short circuit protection.
Reliable Performance & Widely Use
- Made of flame retardant ABS materials with a high degree of fire resistance capability.
- Designed especially for powering LED lights. It converts household 100-240V AC to DC low voltage for a long lasting LED lighting solution.
- Easy to install ,Insert the wire into the appropriate terminal holes and tighten down the screws. Afterwards cover the terminals and tighten down the screws.
- No humming, light flicker or switch on delay from the transformer. Low power design, static power consumption, low calorific value.
- WARM TIPS: For maximum working effectiveness and performance, please keep the load at no more than 80% of its maximum capacity.
12 Volt Constant Voltage Led Adapter for strip lights
- LED photoelectric products, such as soft and hard led strip lights, cabinet lights, led display, indoor deck lights, indoor stair step lights.
- Ring doorbell, 12v LED Module or LED bulb lamps, led tape lights, led downlights, led panel lights, ceiling lights.
- LED Spotlight, led floodlight or even as a CCTV camera power supply and more.
NOTE
This led driver transformer is a constant voltage power supply and is NOT suitable for lighting products with adjustable luminosity and chromaticity, otherwise it is prone to short-circuit and burning. For example, dimmable LED lights and LED color-changing light bars.
Kim James
Reviewed in the United States on March 7, 2025
Worked perfect small 12v puk lights
Eduardo
Reviewed in Spain on March 1, 2025
Funciona muy bien
HairRaiser
Reviewed in the United States on September 18, 2024
Had a nearby lightning strike that killed a few minor electronics.This LED driver went into a vanity mirror to power the LED strip lights surrounding the mirror.Had to bybass the touch switch but lights work great using the wall switch. No dimming.
John Reveley
Reviewed in the United Kingdom on August 22, 2024
I am happy with this LED transformer, it was smaller than expected, I needed it to replace a transformer that powered ME16 halogen lights. I was advised to swap the halogen for LEDS by an electrician but the original transformer didn’t work with them. My concern was that because the lights were switched by a motion controller and I have had issues in the past using LEDS in that configuration, anyway this setup works great.
CIM
Reviewed in the United States on July 6, 2024
I should have read the description more carefully. It does state within one paragraph that it is not dim-able. As my kitchen project took longer until I was able to test I exceeded 30 day return window.I liked the idea of a slim driver that could be hidden within a floating shelf
markeby
Reviewed in the United States on June 18, 2024
I purchased this when rewiring under cabinet lighting units. This carried the power required at about 85% of its rated power with no difficulty. LEDs are stable and bright with no flicker. Unit can run 24 hours with no problems. I didn’t even notice it getting warm.
sn
Reviewed in the United States on February 18, 2024
after replacing my halogen bulbs with G4 led ones, the new bulbs got very hot to the point i could smell something burning. i read that the halogen transformer should not be used with led bulds. i replaced mine with this(LED TRANSFORMER) and instantly the bulbs were cooler and no burning smell. i then ordered a second transformer for the other side of my kitchen cabinets since the new transformer worked with the same results. keeping the halogen transformer could have caused a fire if the led bulbs got too hot and caught fire or at least ruined the new bulbs.
Customer
Reviewed in Singapore on November 21, 2024
Good quality item, I hope this will last longer than my 3 Philips predecessors.
Ed S.
Reviewed in the United States on October 4, 2024
I installed on a string of recessed LED lights. It outputs 12v DC. If that's what you need, this is a good choice.
DJM
Reviewed in the United States on June 17, 2023
Worked as stated. No problems
Johnny Lundqvist
Reviewed in Sweden on March 25, 2023
Liten och smidig. Kör 6 st takspottar. Hel nöjd.
3589
Reviewed in the United States on December 14, 2023
I installed the transformer on 12-01-2023. It is supporting 4 LED spotlights that are 12 volt - 10 watts each. They are working OK. I would buy again.
Greg21
Reviewed in France on October 2, 2022
Installé en lieu et place d'un transformateur pour lampes halogènes, après avoir remplacé les ampoules par des led.J'ai pris du 30w pour alimenter 4 ampoules 5w ( normalement il aurait fallu du 22w : 20w d'ampoules +marge de 10% mais au moins j'ai plus de marge).Je recommande.
Recommended Products