Your cart is empty.
Your cart is empty.Product Description
Replaces P/N: 89742-AE010
For FCC ID: GQ43VT20T
For IC/Other: 1470A-1T
Programming: Professional programming required
Pedro
Reviewed in Mexico on February 8, 2025
Uno NO funcionó !!
Customer
Reviewed in the United States on January 18, 2025
The case doesnt fit the little printed circuit card. After 2 weeks I constantly have to open the case to perform UNLOCK. These remotes were engineered incorrectly. The little PCB card works but as usual the MFG of the case is way off. I cannot make either of 2 remotes work and I have tried everything. Its the UNLOCK button that is misengineered. I would LIKE to return them both but I tried shimming the problem area with caulk and it didnt work. ALWAYS have to open case to push UNLOCK.
Iron Man
Reviewed in the United States on September 17, 2024
1. Some vehicles are dealer program only and this procedure will not work.2. Begin with the key out of the ignition.3. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.4. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.5. CLOSE then OPEN the DRIVER's side door TWICE.6. Insert key INTO the ignition then REMOVE it.7. CLOSE then OPEN the DRIVER's side door TWICE.8. Insert the key INTO the ignition and LEAVE it in ignition.9. CLOSE the DRIVER's side door.10. Switch the ignition to ON then OFF.11. REMOVE the key from ignition.12. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.13. PUSH and HOLD the LOCK and UNLOCK button for 2 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.14. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 13 if you have no additional remotes proceed to step 15.15. OPEN the DRIVER'S side door. Programming is now complete
tony reece
Reviewed in the United States on August 4, 2024
While they work well once set up, the problem there is no written directions, we are directed to a web-site. While at the web site I was unable to program the key fobs. I left that website and googled program key fob. I was able to program all 4 key fobs in a matter of minutes. That is why I gave a 4 star rating, otherwise I would have given a 5 star rating. Good value for the money, I recommend and would buy again.
Mariha Aradia
Reviewed in the United States on July 17, 2024
Worked as advertised, comes with 2 remotes, each remote has a battery already installed. you can't beat it for the price. something to note, upon trying to do the "key insert and remove, door open and close" method i discovered it wasn't working. upon further research I found out 07+ Tundra can't self program. Luckily our shop had just pulled the trigger on a brand new Autel scan tool which was able to be used to program the remotes. just keep this in mind if you're a diy'er at home wanting to program these yourself.
Doug B
Reviewed in the United States on December 24, 2024
I bought these for use with a 2011 Toyota Tacoma. There are videos on Youtube showing how to program them. There are several programming steps to go through but it’s not difficult and once programmed they work just like the factory key fobs.
Roseanne B.
Reviewed in the United States on December 11, 2024
Easy to program. Watch a YouTube video. My advice would be to complete the steps quickly, don’t wait too much time between the steps. First couple of times I took too long between steps and messed it up. As soon as a I did it quickly, it worked like a charm. Great deal!
Amadmac
Reviewed in the United States on November 3, 2024
I have a 2010 Tacoma. Two fobs came with the truck. One lasted about six or seven years before it wore out and I switched to the other one. It lasted about six or seven years before it wore out so I bought these. It took numerous attempts but I finally got one programmed and it seems to work. These fobs are clearly very cheaply made and feel flimsy. The door open button on the second one broke during the programming process so I ended up with one of the two operational. I can’t imagine this thing lasting very long. Time will tell.
Patrick Ellard
Reviewed in Canada on October 8, 2024
Signal not as strong, less range than brand fob, but looks and works just fine - especially for the price!
عبدالوهاب الغامدي
Reviewed in Saudi Arabia on January 9, 2024
ارجو المصداقية في وصف المنتج لانه لايتوافق مع سكويا او تندرا وعند الارجاع تطلبون قيمة الشحن للارجاع بمبلغ 222﷼ وشريت من تطبيق ALI Express ارخص منكم بكثر تمت برمجته في دقائق
JB
Reviewed in Canada on February 16, 2023
If you are debating buying these from a dealer, don't. The reviews that say they don't work are either people buying for wrong models or those who cant follow instructions.Every time Ive bought these for my older Tacomas, Camry, HIghlander, Tundra etc. no issues.I always laugh when doing the programming.. open door, insert key, closer door, multiple times. Sounds silly but its just how you enter the programming mode. Dealer will want 100 bucks to do what you can, just watch the video takes less than 60 seconds. This seller even includes a link the best video I have seen so far. Good job guys.
Nc
Reviewed in Canada on November 29, 2023
Shipped quick, good price and super easy set up, just watch the YouTube vid. Don’t take to a dealership and waste $$$
Larry Baker
Reviewed in the United States on August 21, 2021
Fulfilled and shipped onshore by Amazon (got here in a couple of days). Followed instructions (best to read through a couple of times, you can find a video on youtube). Programmed my 2012 Toyota Tacoma flawlessly. Look and feel identical to factory originals. Couldn't be happier. Caveat: you need to go to their web site (www .remotesremotes. com), look up for your vehicle, print out, etc. Toyota made sure you could not enter programming mode accidentally; the instructions seem inane, you will think you need to dance in a circle, flap your wings, etc., but just follow the directions, and everything will work out). Instructions provided were a piece of paper directing me to the web site. Couldn't be happier. Another reviewer posted the instructions, but here they are again:1. Begin with the key out of the ignition.2. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.- insert, pull out- insert, pull out4. CLOSE then OPEN the DRIVER's side door TWICE.- close, open- close, open5. Insert key INTO the ignition then REMOVE it.- insert, pull out6. CLOSE then OPEN the DRIVER's side door TWICE.- close, open- close, open7. Insert the key INTO the ignition and LEAVE it in ignition.- insert8. CLOSE the DRIVER's side door.- close9. Switch the ignition to ON then OFF.- turn key to on- turn key off10. REMOVE the key from ignition.- pull key out11. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.- door will lock, then unlock12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.- lock & unlock, together, 1.5s- lock, 2s- lock should cycle13. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 12 if you have no additional remotes proceed to step 14.14. OPEN the DRIVER'S side door. Programming is now complete.
Recommended Products