Your cart is empty.
Your cart is empty.Product Description
7-20V FPV Transmitter
Video Format: NTSC, Output Impedance: 50 Ohm
Antenna connector: RP-SMA connector
Supply current: 280 mA, Operating Temperature: -10 +85℃
Video Band Width: 0-8.0 MHz, Audio carrier Frequency: 6.5 MHz
Video Input Level: 0.8,1.0,1.2 Vp-p, Video Input Impedance: 75 Ohm
Audio Input Level: 0.5,2.0 Vp-p, Audio Input Impedance: 10K Ohm
Operating Voltage: 7-20 V, VTX Size: 31mm*25mm*8mm
600TVL perfect picture quality camera
CCD: 1/3” Sony SUPER HAD II CCD
Pixel: NTSC: 768(H)×494(V),TV System: NTSC
Resolution: 650TVL(b/w), 600tvl(color)
Synchronization : internal synchronize
Shutter Speed: (CCD IRIS) NTSC: 1/60~1/100000 sec
Noise: > 60 (AGC OFF), Video Out: 75ohm, synchronize
Min. Illumination: 0.01Lux, Auto Gain: Off/Low/Mid/High
Back Light Compensation (BLC): Off /Back light compensation/ Strong light suppression
Private shading (PRIVACY): 1~8 private shading area
Motion Detection (MD): On/ Off (Multi level sensitivity settable)
Auto White Balance: Manual / Auto / Auto track
Mirror: Horizontal Mirror optional
Negative: Positive / Negative optional
Color to B&W: Auto, DNR: 2DNR; WDR: D-WDR
Day / Night Shift: Auto/ Color/ B&W
Menu (OSD): English menu, White Dot Repair: Support
Image Adjustment: Support, Camera Title: Support
Power Requirement: DC5V~22V, Working Humidity: 20~80%
Storage Temperature: -40 ℃ ~ +60 ℃
Storage Humidity: 20~95%
Dimensions(mm): 25X25(W*L)
Power Consumption: 70mA
Package includes:
1x FPV transmitter
1x 600TVL Camera
2x Cables
1x Base bracket
1x antenna
1x Connector and cable set
1x Manual
John
Reviewed in Canada on February 4, 2025
Clear picture and strong signal. Only issue is the transmitter gets very hot.
Axel H
Reviewed in the United States on October 21, 2024
Not let down BUT not sure if it’s me but was hoping for better, I bought this to have a on board video cam for my nitro rc and hey it works NO PROBLEM but I guess I was hoping for more but can’t really explain what I mean, would I recommend these for the price and being my first time doing this YOU BET again easy setup easy to use and they do work as said. I was just hoping,
William Baril
Reviewed in Canada on August 17, 2023
What did I like is that it was a pretty good price and the quality is OK but after one year I don’t know how it happened but it’s just stop working just like this and I open the camera and I saw that one little piece unsolders and I don’t know how to fix that
SLEEER
Reviewed in the United States on June 30, 2023
This works very well at long range at first it didn't work well because of the cheap antenna, but I put a clover type on it and it is a great price. I have it linked to a tactic display , great picture.
Di
Reviewed in Mexico on May 20, 2023
The media could not be loaded.
Megarto
Reviewed in Canada on March 17, 2022
Seems to get good range, easy setup and bonus it has a built in microphone that’s not advertised!Edit* for the price this is actually great, I got pretty solid range and it gets about as hot as a normal 600mw would nothing crazy. I ran a small fan on mine as it’s stationary a lot of the time if this was on a drone it wouldn’t be necessary. Camera is also great quality for the price especially. Recommend
J. Jackson
Reviewed in the United States on March 10, 2022
I purchased five of these units. I simply rewired the camera and VTX connections to plug separately into my FC and it worked flawlessly.Got out to three and half kilometers with a clear picture.For what its designed to do it does the job for the price. Sure...They are better cameras and vtx[s] out there but this combo has not let me down. Maybe I've been lucky 5 out of 5 isn't bad.
Justin Acito
Reviewed in the United States on July 17, 2019
Product works, but has an extremely unfocused and dim picture. Have used my FPV goggles with other cameras and never had this problem. Also tried a run cam with this transmitter and no problems.Spend $10 more and get a better setup unless all you need is the transmitter, which works great.
GMedina
Reviewed in the United States on November 13, 2019
Very good system. The picture quality is way better than expected. Easy to use digital display. I am an FPV quad fanatic and thought it would be fun to put this in my Traxxas Rustler and it was a very simple plug.
Brian Buckmaster
Reviewed in the United States on March 9, 2018
Bought this system after preusing others and reading reviews. I just connected the vtx and camera and fabricated power/ground leads with bullet connectors as I intend to tap into the power distribution harness on my Elev-8 quadcopter. The system works great! No problem with initial hook up and test, and it was easy to install on the aircraft. I retested by powering up the aircraft and everything is fine. I have not flown it yet, but expect to have a great experience!
Kirk B.
Reviewed in the United States on August 9, 2017
Absolutely great deal with the included camera. Unfortunately, my luck with VTX's lately is bad. This unit arrived faulty & would not display an image on my camera. After three separate occasions of seeing an image and then cutting to static, i realized the board wasn't staying powered on & was constantly resetting/overheating.Would like a replacement or refund :(EDIT: The company contacted me & offered a replacement. I changed my review to 4 stars!
Chan S
Reviewed in the United States on January 13, 2017
*Edit*It works perfectly fine if you figure out the issues. The wires in plug that comes with VTX is not correctly placed in order. Red is used for Ground- and Blue is used for Voltage+. I plugged camera into the supplied power from VTX blue wire and it started squealing like it was being fried from too much heat. I tested the output voltage from VTX and 19.8 Volts seems way too high for this camera and will burn it out. I finally ended up using filtered 12 Volt and Ground from PDB to power the Camera instead of the blue wire from VTX.Do not use the supplied plug from VTX to Camera. Cut that harness and make sure you power camera from PDB or it will be noisy.Camera is the best part about the purchase with an awesome OSD but needs lots fine tuning to work. I tried it today in the sunlight and all I got was yellow shadows and outlines. It worked perfectly fine last night in very low light but needs to be adjusted for bright light.Camera Settings:LENS - ManualEXPOSURE - Shutter - Auto Brightness - 65 AGC ---- DWDR - OnWHITE BALANCE (WB MANUAL) - Manual Color Temp - Manual Blue - 64 Red - 43BACKLIGHT - OffDAY & NIGHT - Auto D>N Level - 144 D>N Delay - 5 Sec N>D Level - 112 N>D Delay - 5 Sec
Recommended Products