Your cart is empty.
Your cart is empty.Product Description
DT Connector Housings
- Rectangular, thermoplastic housing
- Integrated latch for mating
- Wedgelocks confirm contact alignment and retention
- Flame Rating: UL94-V0
- Accept Wire Range: 14-20 AWG (2.50-0.50 mm²)
- Cavities: 2, 3, 4, 6, 8, and 12 cavity arrangements
- Operating Temperature: -40°C to 125°C)
- Accepts Contacts: Size 16 Nickel Plate Size 16 Gold Plate
Size 16 Contacts
- Contact Size: 16#
- Mating Pin Diameter : 1.59 mm [ .063 in ]
- Terminal Transmits : 0 – 24 A (Low Power)
- Crimp Type : Indent(4-indent crimper)
- Material: Tin Bronze/Nickel plate
- Current Rating: 13-Amps
- Wire Range:14-20 AWG
- Contact P/N: pin socket
Sealing Plugs
- Open cavities provide pathways for contaminants to enter the connectors. To maintain seal integrity, any unused cavity must be filled with the appropriate size sealing plug.
DT Series Connectors
DT series environmentally sealed connectors are designed for cable to cable and cable to board applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture.
JRready DT Family Connectors
Connector/Terminal/Sealing Plug
- DT connectors offer field-proven reliability and rugged quality.
- DTM connectors offer solutions to your smaller wire gauge applications. The DTM connector line was developed to fill the need for lower amperage, multi-pin connectors.
- DTP connectors provide solutions for your power application requirements. The DTP connector line was developed to fill the need for higher amperage, multi-pin connectors.
- The DT series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.
- The DTM series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
- The DTP series offers the designer the ability to use multiple size 12 contacts, each with 25 amp continuous capacity, within a single shell.
Mr. Sean Tp Green
Reviewed in the United States on February 25, 2025
I really like these kits. Everything you need to make a connector is in the package unlike others i have seen where you have to buy each item separately.
Wookieecantina
Reviewed in the United States on September 29, 2024
I've been using these Deutsch connectors for years and you know, I've really grown to appreciate their design and function.They're very water resistant for most applications and while there is a learning curve and special tools are required to utilize these, the small investment is absolutely worth every penny.If you're using these for the first time, I would definitely recommend watching a few YouTube videos to give you a heads up as to how these work as it's a bit confusing your first time.Once you're up and running, you'll wonder why you've never used anything but these.
Matthew C Smith
Reviewed in the United States on July 26, 2024
I used these to add accessories onto a motorcycle so they can be disconnected quickly. They were high quality, easy to use and have held up to the elements.
T. VANDERMEULEN
Reviewed in the United States on June 28, 2024
If you're looking for water-proof connectors, keep looking. The gaskets on these pop right off as they're inserted or disconnected.The brand they're trying to copy doesn't have this problem. It's a shame you can't find the name brand items on Amazon anymore. These knock-offs save only a few bucks.I'm returning these and buying Deutsch brand on another eCommerce site.
Dr D
Reviewed in the United States on June 23, 2024
These are fantastic connectors. You need to pay attention to which pieces go on the mail side and which pieces go on the female side. Just look at the pictures on Amazon and you can tell. You will need a good crimping tool or else need to solder the pins on. I have an old aircraft surplus crimping tool which worked okay.
Mike
Reviewed in the United States on March 11, 2024
Used for speaker install. These worked really well. However they should really include extra contacts. I ended up soldering mine on instead of crimping.
j j
Reviewed in the United States on October 23, 2024
Great product
garry sooley
Reviewed in Canada on March 30, 2023
I used this product(connector)for a wire harness for my Baja Led light LP 4 plus
Paul Barton
Reviewed in the United States on February 7, 2023
I bought these and the proper tool to crimp and remove the terminals if needed. I started replacing all the old plugs on my '03 C5 Corvette, as I come across older plugs that are difficult to disconnect. I love them compared to the old tech that Chevys were using in the late 90's early 2000's. Just purchased 10 more two terminal plugs to have on hand. I'm definitely sold on these!
juan
Reviewed in Mexico on August 28, 2021
Muy buen producto llegó rapido
Ken
Reviewed in Canada on August 23, 2021
First of all, the people that are saying these are bad, or the locks not going in, must not know how to use the product.I ordered a set of the 4 pin connectors and used them in an install today, and everything went flawless. I have zero complaints so far. Now, I cannot comment on the longevity of the product and how well the housing will hold up, I'm not sure what it's made of, but I'm not very concerned, especially when these are a fraction of the cost of the TE brand.
Aaron
Reviewed in Canada on February 11, 2021
had to cut the internal plug to make the connection seal
Chris
Reviewed in Canada on April 8, 2021
Pretty straight forward, make sure you solder pins to the wires for best connections.
Recommended Products