Your cart is empty.
Your cart is empty.The patented Jonard Tools CST-1900 Round Cable Strip & Ring Tool is designed for fast and precise removal of cable jackets from round cables that are 3/16” to 1 1/8” (4. 5 mm to 29 mm) in diameter. This round cable stripper features a Triple Action design as it can make longitudinal cuts for end stripping, spiral cuts for end and mid span stripping, and circular cuts for jacket removal. It has a patented stripping mechanism that provides a “spiral stripping mode” to strip and remove tough insulations and can cut through a variety of jacket materials such as PVC (polyvinyl chloride), rubber, PE (polyethylene), and many more. The spring-loaded blade can be adjusted to make it easy to work with multiple round cable sizes ranging from 3/16" to 1 1/8" (4. 5 mm to 29 mm) in diameter. This round cable stripper is Made for Life as Jonard Tools makes high-quality tools that are designed to last a lifetime. Replacement blade is available (part number: CST-7915).
Mike
Reviewed in the United States on February 26, 2025
Cutter broke on first cable, I used it on. A 3/c 16. Went around cable. Broke as started down cable. Waste of money.
michael p. prisco, jr.
Reviewed in the United States on January 24, 2025
It does a great job. It’s quick and easy to use.
rysin
Reviewed in the United States on September 20, 2024
works very good for me. is a must have when you deal with SOcord.
Ramiro
Reviewed in Mexico on August 21, 2024
Excelente herramienta
Elias Cuevas
Reviewed in Mexico on August 2, 2024
llevo varios meses con esta herramienta, me ha sido de mucha utilidad en mi trabajo ya que realizo instalaciones electricas, me ahorra mucho tiempo y esfuerzo para tener listo una conexion de varios cables!!!
Terry Wolf III
Reviewed in the United States on July 30, 2024
Ease of use. I save a bit of time using this tool. And it's a perfect cut everything.
Ray Peloquin
Reviewed in Canada on July 18, 2024
Working up in Northern BC in Oil & Gas. This is my go to for any terminations from #6 to 500kcmill. Works great once you dial in the cutting blade and get the direction of spiral down.
RiderofaRodeo
Reviewed in the United States on July 10, 2024
Stripping cables was always a hassle, until I saw a fellow engineer with one of these. I had used those ones with the little razor blades in the them before, but they were not easily adjusted, and the size ranges were somewhat limited. This solves both of those issues, plus adds a couple more features that those razor blade-style ones can't do.Well worth the price in the time and frustration saved.
Stephen Gale
Reviewed in the United Kingdom on May 28, 2024
This works every time and is far quicker than messing around with blades to strip outer cable insulation.
John M.
Reviewed in the United States on December 1, 2024
Could have got the cheaper versions but went with this on because it is made by a tool company that makes MANY tools (doubt they will be going anywhere anytime soon) and it came with a lifetime warranty... also will be easy to purchase replacement blades if I should ever need one... should also point out that this unit is made in England!!! so easy to use, takes less than 2 seconds to strip 1/0awg cable which I did about 100+ times with this thing so far... LOVE IT
C
Reviewed in the United States on May 10, 2022
Finally a product that has clearly been engineered and tested properly.I always spent too much time, and had too many cuts into the cores, with other tools (including knives, pliers, even teeth!).This tool allows for precise cutting of the cable, fast and consistent. I can even remove the shielding in the middle of a cable, no effort. Just learn how to use the 90 degree twist function, it rocks!As there is no scale, or preset, when changing between various cable types, I am not always sure I reset it to the right depth. What I do is cut as close to the tip of the cable as I can. In case it does cut into the cores, it doesn't matter as they have to be cut anyway. Rather than, than having a too deep cut and then having to discard that length of cable.Great to work with this kind of product. I wish I had found it many years before.
skotko
Reviewed in the United States on October 4, 2022
I purchased this after purchasing and using the Arolax Round Cable Stripper (of similar size). I was unable to get the Arolax to work on my 18 AWG 3 conductor which is more flexible. The Jonard CST-1900 worked well for this cable (see photos for comparison). The first time, it cut in a perfect circle. Subsequent cuts have started to spiral slightly (which is the problem I had with the Arolax). In order to combat this, I simply grip the cable with my thumb and index finger right at the point where the tool is holding it (see photos). This prevents the tool from moving much on the cable and seems to help prevent the spiral cut when you're not in spiral mode.Things I like:-Strips smaller, flexible cables well (18 AWG 3 conductor - See photos - may need to use fingers to help hold it in place)-Strips 14 AWG 3 conductor power cord well-Tool is easy to manipulate between modes (circular and longitudinal strip)-Tool feels solid in your hand-Says Made in England on the toolThings I don't like:-This tool is more expensive than other options-Does not come with built in blade storage (or an extra blade) like the Arolax did-Does not have an edge to help strip/peel back cut insulation on the end of the tool like the Arolax did-Doesn't have a "gauge" to indicate depth of cut as another reviewer stated (none of the ones I looked at had this feature - this would be virtually impossible to implement due to how the tool adjusts the blade depth)Overall, I am very happy with this tool and I would rate it 5 stars if it had some of the Arolax features and/or it didn't have a slight tendency to spiral on the smaller, flexible cable.Edit to add photos.
Customer
Reviewed in Canada on June 4, 2019
Great product
Recommended Products
$27.74
$ 12 .99 $12.99