Your cart is empty.
Your cart is empty.Levonia
Reviewed in the United States on February 20, 2025
This 240mm motor has the proper housing and connection for the Elegoo Mars 4 9k, but is about 25mm shorter than the original. Overall happy for the quick fix but recommend contacting Elegoo support for a proper length product (~$18+$15 shipping but takes a while to arrive). Still glad to get this motor so fast to get back to printing. Hopefully it lasts!
Just me
Reviewed in the United States on August 1, 2024
Fixed my wonky resin printer Z axis, I had to 3d print a custom nut to fit the 3 hole pattern of my printer, but it was a fun project and it worked well.
Attila Terragni
Reviewed in Italy on March 10, 2024
Mi serviva un motore compatto ma dovevo sollevare un peso consistente. Questo piccolo motore ha risolto brillantemente il problema. Ovviamente è più lento degli omologhi con passo 8mm (fino a 10mm/s se la cava comunque benissimo), ma ha una forza incredibile e l'irreversibilità della vite è un pregio per il mio uso
William
Reviewed in the United States on February 2, 2024
Low quality motor which has already stopped working within weeks of installation. I purchased this stepper motor for my Elegoo Mars Pro, and used it for only 1 week before it started buzzing and having severe z axis binding. Pay for higher quality parts or simply another manufacturer because this one isn't it.
Red
Reviewed in the United States on April 21, 2024
Nice stepper motor.
C. Tem
Reviewed in Germany on July 5, 2023
240 mm Version benötig für den Einsatz im Photon Zero einen leichten Dremeleinsatz und einen Poltausch des Kabels von Rot und Grün. Klappt dann aber super. Macht einen besseren Eindruck als die Orginal Z-Achse.
Connor Dieringer
Reviewed in the United States on February 22, 2023
This will work with a photon mono 4k but with the brass bit that stabilizes the rod the holes don't line up fully if you drill the holes out with a 9/64 bit you can get at least 3 of the 4 screws in I made the mistake of offsetting one hole so I only got 3 but I believe you can get all 4.
Troy Taylor
Reviewed in the United States on February 21, 2023
The media could not be loaded.
David Martos
Reviewed in Spain on September 3, 2022
Perfecto para el recambio de motor de la Photon s, como dicen los compañeros de abajo, hay que cambiar los cables centrales para que funcione, pero nada difícil!
nick
Reviewed in the United States on March 6, 2021
Stepper motor works with the Photon S but it is 15mm too long so I had to drill a hole in the aluminum plate at the top. Also the wiring isn't correct off the line so make sure you swap the two center wires. Other than that these motors are perfect.
Anthony
Reviewed in France on April 10, 2021
Je mets 4 étoiles et non 5 car la tige filetée, que j'ai reçue, fait un petit peu plus de 210mm et donc elle est trop longue de quelques mm. Ce qui m'a valu de tout démonter et de tout remonter plusieurs fois afin de trouver d'où venait le problème. Mais une fois tout en place (avec des rondelles pour espacer), cela fonctionne très bien.NB: pour le câblage, j'ai inversé les fils: bleu à la place de noir et rouge à la place de vert du coté du connecteur à la carte mère.
nizoo
Reviewed in Canada on November 1, 2020
Excellent motor and especially customer service.
Yankee Farmer
Reviewed in the United States on March 14, 2018
These work very, very well; very smooth, straight, and powerful. My machine uses 2 Z-steppers, so I had to increase the max. current on the driver, and add a heatsink. A note to Repetier users: The leadscrew calculator lists a T8-2 leadscrew, but the value this calculator returns must be divided by 4, for example, the motors are a 1.8 degree step, and my driver is set for 1/16 step, giving 3200 pulses per revolution. On these 4-lead screws, 1 revolution gives 8mm of travel, so the correct Z-step setting is 400 pulses per mm. Hope this helps.
Recommended Products
$22.52
$ 10 .99 $10.99