Your cart is empty.
Your cart is empty. This is bipolar Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 400mA at 12V, allowing for a holding torque of 32Ncm(45.3oz.in).
Electrical Specification
* Manufacturer Part Number: 17HS19-0406S
* Motor Type: Unipolar Stepper
* Step Angle: 1.8°
* Holding Torque: 32Ncm(36.24oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 30.0ohms
* Recommended Voltage: 12-24V
* Inductance : 25mH±20%(1KHz)
Physical Specification
* Frame Size: 42 x 42mm
* Body Length: 48mm
* Shaft Diameter: Φ5mm
* Shaft Length: 24mm
* D-cut Length: 15mm
* Number of Leads: 6
* Lead Length: 500mm
* Weight : 380g
Connection:
Black(A+), Yellow(O), Green(A-), Red(B+), White(O), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Jim
Reviewed in the United States on October 30, 2022
While I thought this motor was going to be what I wanted, it wasn't. First if you run the motor at 12 VDC it will only work up to about 500 steps per second and the torque is less than advertised. If you run the motor at 24VDC it will work up to about 1000 steps per second with an increase in torque but still not what it should be. The coil resistance should be 30 ohms per phase, but it is 60 ohms which explains its underperformance. For what I got it was not such a great deal.
Recommended Products
