Your cart is empty.
Your cart is empty.Product Description
1/2'' Indexable Carbide Turning Tool Insert Holder Set, 21 Pieces
Indexable Lathe Turning Tool, 7pcs 1/2'' Shank Carbide Turning Tool Insert Holder Set, Lathe Boring Bar Set Metal Lathe Tool Holder for Turning Grooving Threading with 7* Carbide Inserts and 7* Wrench
1/2'' Indexable Carbide Turning Tool Set
Specifications:
Brand: ZMCYNG
Condition: Brand New and High Quality
Material: Carbide; Alloy Steel
Color: Black; Golden
Features:
1. High Accurancy: Effectively and precisely cut your workpiece.
2. Good toughness and hardness, show a perfect machining effect.
3. Good low temperature impact toughness, improving the surface glossiness of the cutting pieces.
4. Reduce tool grinding cost and improve cutting efficiency.
Details Of The Turning Holders:
MWLNR1616H08
Main declination : 95°
Hand of Tool: Right
Insert: WNMG 431
Shank diameter: 5/8" (0.63")
Overall length: 3.93in (100mm)
SER1212H11
Hand of Tool: Right
Inserts: 11ER AG60
Shank diameter: 1/2'' * 1/2'' (0.47in)
Overall length: 3.93in (100mm)
MGEHR1212-2
Rake Angle : 0°
Hand of Tool: Right
Insert : MGMN200
Shank diameter: 1/2'' * 1/2'' (0.47in)
Overall length: 3.93in (100mm)
7pcs Lathe Boring Bar
SDNCN1212H07
Rake Angle : 63°
Hand of Tool: Middle
Inserts: DCMT21.51
Shank diameter: 1/2'' * 1/2'' (0.47in)
Overall length: 3.93in (100mm)
SDJCR1212H07
Rake Angle: 93°
Hand of Tool: Right
Inserts: DCMT21.51
Shank diameter: 1/2'' * 1/2'' (0.47in)
Overall length: 3.93in (100mm)
S12M-SCLCL06
Rake Angle: 95°
Hand of Tool: Left
Insert : CCMT21.51
Shank diameter: 1/2'' * 1/2'' (0.47in)
Overall length: 5.9 inch (150mm)
Metal Lathe Boring Bar Set
S12M-SCLCR06
Rake Angle: 95°
Hand of Tool: Right
Insert : CCMT21.51
Shank diameter: 1/2'' * 1/2'' (12mm*12mm)
Overall length: 5.9 inch (150mm)
7pcs Carbide Inserts:
1pcs MGMN200
1pcs WNMG431
1pcs 11ER AG60
2pcs CCMT21.51
2pcs DCMT21.51
Wide Range of Applications:
Lathe boring tool is widely used in turning and finishing of various materials, such as stainless steel, cast iron, steel, copper and aluminum, etc. Usually used for threading, external grooving, turning, finish turning, facing, parting, part-off, cutoff, etc.
Tom Kokoshka
Reviewed in the United States on January 23, 2025
works fine for fine price
Tim Hughes
Reviewed in the United States on September 11, 2024
Photo of product shows holders with inserts plus a case with inserts. This product only comes with one set of inserts. Donât trust photos alone.
Ken S
Reviewed in the United States on July 18, 2024
Only one of the tools has a problem. Looks like it wasn't machined correctly and the insert doesn't full seat. I would like only that shipped out as I had already put all the other tools in quick change holders and centered them, but there isn't an option to contact seller or only get a partial replacement. Feels like a huge waste of time and resources.
Tom English
Reviewed in the United States on May 31, 2024
Was kinda nervous on these but they are nice for the price, the inserts work good on soft steel but once have better quality insert bars are great
Eric Kirk
Reviewed in the United States on February 18, 2024
Unless youâre lathe ing something very soft donât waste you $. Stainless is soft in my opinion. Iâd forget about if for mild steel! Complete junk and wonât return for the hassle.
Bill
Reviewed in the United States on November 20, 2024
Great product at a great price!
Wayne F.
Reviewed in the United States on January 4, 2024
This is a good selection of carbide insert cutters at a great price. That being said don't expect premium carbide at this price. The holders work well. No information is provided with this selection as to which inserts go with which holder, but it is not difficult to figure out. The bottom of the product listing does provide information on the carbide insert type for each cutter. I will copy this information and keep with the tools so I will know what insert I need to order for replacements. Otherwise, there are lots of inserts that look similar and finding the correct insert for the cutter may be difficult down the road. I am pleased with these cutters, but I haven't yet stress them with hard materials.
McLogan
Reviewed in the United States on December 30, 2023
I have a 100 year old lathe that I got working, but did not have any modern cutting tools for it. This kit of seven tools is pretty amazing at this price point.Each of the tool holder come in its own individual plastic slip case. The come with the proper tool to install and adjust the cutter tip for the tools. All of the individual cutters were in a separate plastic snap case.The tool holders are steel with a nice black finish. They should clamp into the holder on my ancient lathe. I like this style as you can just flip the cutter over to get to a new cutting edge surface.Nice set of lathe tools. Recommended.
Recommended Products
$121.99
$ 56 .99 $56.99
$19.95
$ 9 .99 $9.99