Your cart is empty.
Your cart is empty. Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinder
To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.
1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.
2. Wear rings.
Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon
Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
3. Piston seals
1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR
4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm,TPU
Below is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:
Retracted (center to center between rod mountain hole and clevis hole: 32.4”
Extended (center to center same as above): 56.4”
Stroke: 24±0.05”
Dimension from center of clevis hole to back face of cylinder: 2.95”
Dimension from center of rod end hole to front face of rod: 1.06”
Dimension from center of rod end hole to front face of cylinder: 1.18
Ports: 1/2" NPT
Dimension from port to port: 25.4”
Rod: 1.75" rod
Rod end mountain hole: 0.55”
Clevis Mountain hole: 1.16”
Dimension between mountain clevis to clevis: 0.87”
Thickness of each mountain clevis: 0.375”
Length of each mounting clevis: 4.125”
Martin M
Reviewed in the United States on August 26, 2024
Gasket blew on the ram for my log splitter. It’s a pain to get the ram disassembled but these seem to fit right. After reassembly and topping off the hydraulic fluid I ran and split wood for about 4 hours and everything seemed fine. I have a lot of wood to split soon so we will see if them hold up.
Richard PORTER
Reviewed in the United States on July 31, 2024
was what i ordered ,good fit and fast delivery
amanda
Reviewed in the United States on March 18, 2024
Rebuilt 22 ton huskee log splitter cylinder and works great. No leaks and splits wood with great pressure. Highly recommend purchasing this seal kit
Margaret Gage
Reviewed in the United States on February 22, 2024
havent used yet
Barb B
Reviewed in Canada on February 16, 2024
Heart sank when I opened the box and it said 5" x 1.75. I ordered a 4.5". opened it anyway and it ended up being tagged wrong.
Robert Higgins
Reviewed in the United States on October 24, 2024
4.5 That's Right 4½ inch right here this is it. Found it all of it. Every seal it took to seal up that log splitter. Dang babe is making me work again. 😂
Paul E. Fox
Reviewed in the United States on October 2, 2024
I was actually a bit surprised as the log splitter cylinder I needed to rebuild was quite old. Fit perfectly, worked like a charm.
Alec
Reviewed in the United States on January 16, 2024
Perfect fit no problem at all works great
Rick M.
Reviewed in Canada on April 20, 2024
Original seals split about 90 cords of fir on my Speeco 25 ton before the rod seal failed. Hopefully this set performs the same. The kit is a perfect match for my 4 1/2" cylinder. A couple o-rings left over. I didn’t bother grinding off the weld and removing the piston to replace the 2 orings between it and the rod. Maybe next time.
Anneliese
Reviewed in the United States on October 23, 2023
Perfect
Recommended Products
$17.90
$ 7 .99 $7.99
$18.00
$ 8 .99 $8.99