Your cart is empty.
Your cart is empty.Product Description
Features:
- What you need is a safe grab handle enabling you easy assistance in and out of the vehicle, or holding yourself in place while bouncing down the trail.
- The strap design holds the handle securely in place and supports heavy weight, while the contoured handle assures a firm yet comfortable grip.
- They are universal and adjustable and will work on any round or square padded or unpadded bar.
- Everything you put on your Jeep should match your Jeep with look, feel and quality.
Black Steel Front Grab Handles for 1997-2006 Jeep Wrangler TJ & Unlimited
Driver side and passenger side handles Included
- Assists in Entering & Exiting the Jeep
- These handles are solid steel so they don't sway back and forth like other handles
Simple Installation.
- Tools Need: T40 Torx wrench,using the factory bolts,drilling is needed for 2004-2006 Wrangler TJ
Package Included
- 1x Pair of Hooke Road Grab Handle
Why Choose Hooke Road?
The Hooke Road Brand has been certified as a member of SEMA.We are studious and gradually grow up to be a professoinal aftermarket retailer.As a SEMA member, we make, buy, sell and use all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again.Wish you have a terrific off-road experience with our products.
MR GUY
Reviewed in the United States on January 13, 2025
I have a 2003 tj. I removed the trim because that makes it much easier to make this install. The a pillar is already painted and looks better than the trim. You can save the trim in case you change your mind or decide to sell. If you want to leave the trim to cover accessory wiring that you have installed you can just cut the top few inches off of the trim.
Fubar
Reviewed in the United States on July 22, 2024
These went in my 02 Wrangler no problem. They are very sturdy and made of a solid piece of steel. They don’t impede vision and provide a grip for entry and a little reassurance for when the doors are off. I definitely recommend this product.
EarthyJo
Reviewed in the United States on June 30, 2024
Installed these on my '99 Jeep. They are much sturdier than the cloth ones that everyone has. The only issue if my son likes to pull himself forward when he gets in the Jeep and he keeps hitting his head. That's more of a problem with how he is getting in instead of a product issue. They are super tough and work great. Installing is very easy and they look nice. Also, they are textured so grabbing them with wet hands isn't a problem.
Customer
Reviewed in the United States on June 29, 2024
Really easy to install (you'll need a star bit for the Jeep's bolts) and sturdy for 170lb guy.
BabyJay501
Reviewed in the United States on May 20, 2024
Very sturdy construction, solid bar with decent welds. Wife doesn’t mind climbing in & out of the TJ with a bad knee as much anymore.
Greg C.
Reviewed in Canada on June 25, 2023
All good, would buy it again
Dobie S. Pinscherman
Reviewed in the United States on June 19, 2023
This pair of grips makes a nice addition to a lifted tj. Sturdy, good welds, smooth finish and nice molded grips.The only things I can fault it for, is a lack of directions, and no hardware. The directions would have been a nice thing to have. A template,or at least a sketch showing the portion of the overhead trim panel that needs to cut would have helped.Pop open the soft top, or remove the hardtop to access the top of the a-pillar. (My tj is a 2006, this is necessary for this year)Remove 3 covers screws, remove the sun visor, pop the trim tab off the top (that holds on the rubber weatherstripping) and pop the cover off the a-pillar. Remove the two screws that mount the rollbar to the windshield header, and install the grip. I used blue locate on my screws.Hold the trim up against the a-pillar, and take your best guess as how wide, and how deep to make your cut. (You cut from the windshield side of the trim, towards the inside of the vehicle)Reinstall the cover, and screw it in place. Don't forget the rubber trim push retainer, up top. Repeat for the other side. Again, new hardware for the rollbar mount would have been nice, as would a rough diagram showing the outline of the cut. (Your year might not need to be cut, the 2006 does)This handle is rock solid, and you can rock the jeep side to side pushing and pulling it. It's that sturdy.
Josh Payne
Reviewed in Australia on August 29, 2020
Great quality very solid
Denise
Reviewed in the United States on January 7, 2019
These work great. My boyfriend had these in his Jeep first and I decided I liked them a lot more than the velcro/rollbar grab handles. They're very sturdy and feel more secure to grab onto getting in and out of the Jeep.------------------------------Notes on installation:They're relatively easy to install, I would recommend doing ONE BOLT at a time instead of taking both out and lining it up, your roll bar may have enough tension that makes it harder to line everything back up if you take both bolts out at once. Basically take one bolt, loop the handle in, tighten down most of the way, then do the other bolt, repeat, tighten everything down.As the instructions mention if you have an 03-06 TJ your door trim is a little different/has more plastic and you will have to cut part of it to make it fit. I have an 02 so did not have this issue though I did have to loosen it so the handle could fit behind it flush against the windshield. If you don't want to cut the trim you can order the older style door trim and swap it in.If you have a soft top you might find the door surrounds are just in the way enough to make it a little annoying to line up a socket and ratchet straight on. It's more work but I undid my top halfway to get the door surrounds off just to get a more direct aim so the bolt went back in straight. You could also probably use a wiggle/u-joint socket extension if you don't want to take the top part-way off.
Phillip
Reviewed in Canada on October 5, 2018
Me and my passengers have gotten some good use out of these new grab handles. It makes getting into my 2002 Jeep TJ effortless and easy. A must have if your Jeep is lifted. Only downside is after installation you can no longer swing your sun visors from the windshield over to the drivers side/passenger side doors to block the sun from the side as the sunvisor pivoting elbow will hit the grab bars.
Roger Christophers
Reviewed in Australia on October 5, 2018
Great value well made, very solid. Easy to fit. Good shipping arrawith tracking information.
TJ
Reviewed in the United States on June 26, 2017
Holy Cow!! What an easy install!!!! And - I can get in and out of my Jeep with ease now. I love my new "Sissy Bars" (lol) They are nice and solid, look great - and I can't figure out why they weren't put in the Jeeps as stock. Granted, I have an old Jeep, but this is not a new concept.Don't mess with the "cheaper" ones - you only save a few bucks, they won't fit right - you'll drive yourself nuts. You'll either spend a lot of time trying to make it work - or returning them, like I did. Be smart - order these the first time around.YES - these fit a Jeep Wrangler YJ (1994) (just in case anyone, there is always someone, reads the description and can't figure that out.)
GerdG
Reviewed in Germany on November 10, 2017
Qualität Verarbeitung top, was schlecht ist Beschreibung wo Bohrung gesetzt werden muß, da sollte man aufpassen und vorher genau probieren bevor man bohrt.
Recommended Products