Your cart is empty.
Your cart is empty.Product Description
Specifications:
Display: 5999 count LCD display
Power supplied by: 2 * 1.5V AAA battery(Included)
Resistance range: 600Ω ~ 60MΩ.
Capacitance range: 9.999nF ~C 99.99mF
DIode Test: Open Voltage:3.0V,Testing Current:1.5mA
Zener/LED: Open Voltage:MIN 20V,Testing Current:Appr 1mA
Item size: 207 * 36 * 24mm / 8.1 * 1.4 * 0.9in
Item weight: 50g/ 0.11Lb
Packing list:
1 * HOLDPEAK HP-990C SMD tester
2 * Backup test pins
1 * Storage box
1 * User manual
2* 1.5V(AAA) battery
It also can be operated manually. You can press the button "FUNC" to select one certain measuring mode.
Battery Test & Relative Value Function
Long press the "FUNC" key to turn on/ off this tester.
Auto power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key.
Over-load indication.
Low battery indication.
Gold-plated test pins, which can induce its contact resistance and prevent it from rusting.
990C can be used to measure the resistance of precision components such as diodes. It is a very sensitive instrument, so we should always do a good job of protection. Whether in use or storage, we need to pay attention to environmental conditions.
●Operatingtemperature&Humidity:0-40'C (32-104'F) &less than80%RH
●Storage temperature&Humidity:-10-50
●peratingtemperature&Humidity:0-40℃ (32-104℉)&less than80%RH
●SafetyClass:IEC1010-1,CATII
●EMC:AccordingtoCE regulation 89/336.
Denver Dave
Reviewed in the United States on April 12, 2023
I intended to purchased this to test SMD LEDs. After asking the question on the forum if this device can do this, they said yes! When I got it, I immediately tested it with great satisfaction. There is a slide switch toward the probes that can be switch to diodes to provide the necessary voltage/current to illuminate the LED to indicate the actual color as well as the current reading.I was very impressed on how well the unit was designed and put together. Very steady and really felt like an expensive piece of test equipment in my hand. I really appreciated the fact that it came with separate test leads, which also felt like high quality probes and leads. And the added bonus of a very well made storage case to protect the unit. It even had a place to store the batteries with the unit when not in use for longer periods. Awesome work!The only improvement I can suggest would be to provide a third set of attachable tweezer tips that can be used to test the smaller 0402 and 0201 sizes.This is definitely worth the money for us DIY'ers and has a definite place among all my other test equipment.
W3SI
Reviewed in the United States on September 13, 2022
Kind of difficult to use on very small SMD but it is accurite when you can get it on them.
Imran Sharafat
Reviewed in the United States on February 12, 2022
The tweezer part is poorly designed so the tips are not well aligned and that should be expected from a $20 item :).
54730 Shopper
Reviewed in the United States on January 15, 2022
Will be returning this instrument. Not even worth the low price.
A C M
Reviewed in the United States on September 9, 2020
Although the accuracy it's not so great for small value capacitors (under 500p) it's easy to use and is very useful for testing small smd components before and after these are attached on pcbs; it's a valuable tool regarding its price. Extra test wires are also useful.
Guillermo Hernandez
Reviewed in the United States on September 14, 2020
I got frustrated with this meter. It could not get a stead capacitance reading. It would jump all over the place and most of the time provides and O.L which the manual does not explain. It should say something like NR for no reading and 000 F for a shorted capacitor.Another problem is that the probe contact points are too bit and you cannot read small capacitors close together. The probe cables are also too fat. The probe cables should be needle points as this is supposed to be used for SMD components. It could be the one I got was broken but I can only evaluate by what I experienced.It should have a way to turn the probe off. It stays on for 15 minutes and you cannot change this time.
Leonard Cristescu
Reviewed in the United States on July 30, 2020
good test deice for transistors of any type and smd components
Shaun S.
Reviewed in the United States on September 2, 2019
This little gem of a tool is awesome! On board component testing! Diode and led testing with live voltage on the meter. Great tool worth every penny.
Recommended Products
$289.69
$ 99 .00 $99.00
$362.32
$ 99 .00 $99.00