Your cart is empty.
Your cart is empty.40000 Count handheld LCR meters measures inductance, capacitance, and resistance quickly and precisely. The meters also includes handy functions such as data hold, Minimum/Maximum/Average recording, tolerance sorting, and relative mode. Measurement data can continuously transfer to a PC via the meter's mini USB interface, using either the provided data logging software or SCPI commands sent from a custom program. Fast auto range design for rapid, easy component measurements. USB (Virtual COM) interface. Software for datalogging and front panel emulation available as free download. Selectable auto-power-off options. Applications: Passive component trouble shooting. Electronic assembly. Quality control (component sorting). Measurement parameters: L/C/R/Z/D/Q/Theta/ESR. Test frequency accuracy is 0.02 percent of actual test frequency: 100 Hz, 120 Hz, 1 KHz, 10 kHz (test setting), 100 Hz, 120.048 Hz, 1 kHz, 10 kHz (actual frequency). Tolerance mode: 1 percent, 5 percent, 10 percent, 20 percent. Backlit display: yes Test signal level: almost equal to 0.6 Vrms. Measuring circuit mode: Series mode/Parallel mode. Basic accuracy: 0.5 percent. Ranging mode: Auto. Measuring terminals: 3 terminals with sockets. Measurement rate: 1.5 reading /second (range auto search not included). Response time: almost equal to 680 ms/DUT. Auto power-off: 5, 15, 30, 60 minutes, None. Operation temperature: 32 degree F to 104 degree F; 0-70 percent R.H. Storage temperature: -4 degree F to 122 degree F (-20 to +50 degree C); 0-80 percent R.H. Low battery indication: almost equal to 6.8 V. Battery life: almost equal to 16 hours using Alkaline Battery at 1 kHz with 100 ohm DUT, with backlight off. Power requirements: 1) DC 9V Battery, 2) Ext. DC Adaptor: DC 12 Vmin -15 V Maximum (Load 50 mA Minimum.). Measures 7-1/2" length by 3-1/2" width by 1-19/32" height. 1 year warranty.
Thad
Reviewed in the United States on July 23, 2017
I also have the model before this one, and love them both. excellent pieces of equipment
QuantumLeap
Reviewed in the United States on March 30, 2017
This meter does not give accurate capacitor readings on capacitors above 30uf a 100uf,330uf and 470uf all read 20+ uf lower when compared to my Sencore L103 bench top meter and a fluke handheld. Tried all different Freq. settings, did multiple re calibrations all with little or no change,support from BK Precision no help..
Love Bug 123
Reviewed in the United States on December 28, 2017
I like the unit, but it broke down on me after 1.5 years of use. Lucky it has a 3-year warrantee. But, it makes me wonder about the durability of the product. Also it took almost 3-weeks before the service dept returned the unit back to me after repairs were made. But, I like the unit, it's easy to use and seems to be accurate. Would I recommend it.... I suppose I will. However, check with me in another 1.5 years.
Emmanuel
Reviewed in the United States on August 6, 2015
Works great took a bit to figure out the settings compared to the last model but is easy to operate.
Happy Camper
Reviewed in the United States on March 14, 2015
I use this to test flyback transformers. I find the results are accurate compared to much more expensive bench meters. It comes with an AC adapter and test leads. The manual is excellent. The industrial design is elegant and so easy to use. The display is clean and easy to read. Make sure you order with the LC29B case.
K&R in SD
Reviewed in the United States on October 11, 2015
This was a good meter while it lasted. No, it doesn't have the 100 KHz frequency some would like but it was pretty accurate and easy to use. Why just one star? The meter died just a few days after I started using it and it gives an error code indicating that the SMD fuse is blown. This happened after measuring a large capacitor (which had been shorted out first). I replaced that which was not hard to do but the error remains. B&K indicates that the meter was damaged by me and has to be sent in for service at a cost that makes me question if I want to throw more money at it. My advice is to just stay away from this, it seems to easily damaged. What seemed like a good value could end up costing as much as the more capable Keysight meter I should have bought in the first place.
woody
Reviewed in the United States on June 3, 2014
This meter is getting a work out since I do a lot of testing for component failures such as leaky caps and inducts as well as resistance. It never failed me to pin point out the bad parts that were once difficult to find. Now this makes it a cinch and in less time. Grest meter does what its suppose to do..
c claud
Reviewed in the United States on January 25, 2013
BK has really out did themselves with this meter. It works just fine and is easy to calibrate. It did not take very long to figure out what all the buttons did. I really think it was worth the money as it paid for its self quickly the first week just testing capacitors alone.If you are looking for a nice well made easy to use LCR meter, this is it. I am happy with this purchase.
Recommended Products
