Shopping Cart

Your cart is empty.

Your cart is empty.

HengTianMei 60/40 Rosin Core Low Temp Tin Lead Solder Wire, for Soldering Electronic Devices (1.2mm/50g)

4.6 (16) Write Review
Free shipping on orders over $29.99

$8.99

$ 4 .99 $4.99

In Stock

1.Model:1.2


  • Rosin solder wire content parameters: Tin 60% lead 40% (Sn 60% Pb 40%), rosin flux content: 1.8%.
  • Electronic solder wire product parameters: Diameter 1.2mm (0.047 inch), net weight 50g (1.76 oz), melting point around 183 ℃ (361 ℉). 
  • Low melt solder wire usage effect: A reasonable alloy content ratio and the addition of rosin flux make the solder joints firm, with a full color and luster. Excellent fluidity makes it easier for you to operate.
  • Solder wire application scope: The above characteristics make it suitable for soldering various electronic components and manual DIY operations.
  • We have a professional service team, ready to provide the best service for each customer, look forward to the start of cooperation, if you have any questions, please feel free to contact us.


Product Description

solder wire

WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. Remind to wash your hands after using it.

solder wire
HTM 60/40 solder wire

Features

  1. Built-in rosin core
  2. Good fluidity
  3. Low melting point (361°F/183°C)
  4. Solder joints are fuller and stronger without impurities
  5. Good use experience

Specification

Brand HengTianMei
Tin to Lead Content Ratio Tin 60%- Lead 40% (Sn60-Pb40)
Melting Point 361°F/183°C
Diameter 1.2 mm/0.047 inch/17 gauge
Solder wire flux content 1.8%
Weight 50g/1.76oz

What is the use of rosin cores?

This solder wire contains a rosin core, so it helps its fluidity and use effect, so that when soldering tin drops can quickly stick to the circuit board, and the solder joint will be very full.

Because the rosin core as a flux its melting point is lower than the solder material, weight, viscosity, and surface tension are smaller than the solder wire, so when soldering, the flux melts first and quickly covers the surface of the solder, playing a role in isolating the air to prevent oxidation of the metal surface.

And can react with the solder and the surface oxide film of the metal to be soldered under the high temperature of welding, so that it melts and restores the pure metal surface.


William C.
Reviewed in the United States on February 3, 2025
nothing
William C.
Reviewed in the United States on February 3, 2025
nothing
Reinaldo Herrera
Reviewed in the United States on February 24, 2025
Buen producto
Reinaldo Herrera
Reviewed in the United States on February 24, 2025
Buen producto
Gloria Velasco
Reviewed in the United States on February 17, 2025
I’ve been soldering for over 30 years. This stuff is garbage. High melting point, melts dirty and black, dries dull and won’t stick for anything. Don’t waste your money
Gloria Velasco
Reviewed in the United States on February 17, 2025
I’ve been soldering for over 30 years. This stuff is garbage. High melting point, melts dirty and black, dries dull and won’t stick for anything. Don’t waste your money
Jim E.
Reviewed in the United States on February 15, 2025
Great solder!
Jim E.
Reviewed in the United States on February 15, 2025
Great solder!
D J
Reviewed in the United States on January 5, 2025
Worked great
D J
Reviewed in the United States on January 5, 2025
Worked great
Theodore Roome
Reviewed in the United States on December 3, 2024
Low temp solder flows quickly even with cheap soldering iron
Theodore Roome
Reviewed in the United States on December 3, 2024
Low temp solder flows quickly even with cheap soldering iron
ShopTillUDrop
Reviewed in the United States on November 3, 2024
It works i got it quick cheers
ShopTillUDrop
Reviewed in the United States on November 3, 2024
It works i got it quick cheers
joseph cheney
Reviewed in the United States on November 1, 2024
This is tin lead solder. it's ideal for electronics. this diameter specifically is just about perfect for components that pass through and solder on from the underside. This or .7 imoit's just fine. not linked, very soft and easy to place. cleans up beautifully with some flux and wick.this is not the kind for jewelry, but i bet they offer that as well.
joseph cheney
Reviewed in the United States on November 1, 2024
This is tin lead solder. it's ideal for electronics. this diameter specifically is just about perfect for components that pass through and solder on from the underside. This or .7 imoit's just fine. not linked, very soft and easy to place. cleans up beautifully with some flux and wick.this is not the kind for jewelry, but i bet they offer that as well.