Your cart is empty.
Your cart is empty. It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
General Specifications:
Captured Conductor diameter Size: 30mm maximum
Low Battery Indicator: Red LED lighting
Operating Temperature: 0℃ to 50℃, 70% R.H.
Storage Temperature: -20℃~+70℃, 80% R.H.
Battery type: 9V DC, NEDA 1604, 6F22, 006P
Battery Life: 100 hours typical with carbon-zinc
Weight: 250 gram typical Dimensions: 195 mm (H) x 70 mm (W) x 33 mm (D) Output: wire with a straight banana plug or BNC connector
Efficient Measure Range:
1mV/100mA: 100mA to 20A, multimeter range is set to DC or rms AC 200mV
1mV/1A: 1A to 200 A, multimeter range is set to DC or rms AC 200mV 200A to 650 A, multimeter range is set to DC or rms AC 2V
Accuracy:
DC current: 0 to 650 A, ±(3% + 2 A of numerical reading)
AC current (50Hz to 400Hz):0 to 500A, ± (3% of reading + 2A);500A to 600A, ± (6% of reading + 2A);600A to 650A, ± (8% of reading + 2A)
Load Impedance: 10KΩ (typ)
Package Includes:
1x CC-650 Clamp meter
1x Manual
BackAlleyDiagnostics
Reviewed in the United States on November 15, 2024
The media could not be loaded.
william
Reviewed in the United States on May 1, 2023
Used with $150 pico scope works good
Bryan
Reviewed in Canada on March 25, 2023
Inaccurate output only 0.8mv/A at 1mv/A setting and 8mv/A at 10mv/A setting.Good thing my scope software have a custom settings for this probe. Adjusted the settings to 126% to get an accurate ocilloscope Amperage graph.
Customer
Reviewed in Canada on March 17, 2023
Need to reset over and over. Reset button sticks.
Andrew Kendrick
Reviewed in the United States on March 13, 2023
Worth the money
Paul Y
Reviewed in the United States on November 9, 2023
The meter is accurate. The issues are! Zero button will stick in the down position. Which cause reading issues. The selector switch feels pretty cheap. Will it hold up in the long haul?
Andrej Prapotnik
Reviewed in the United States on December 3, 2022
Verry good
Shawn
Reviewed in the United States on April 13, 2021
The switch is cheap and only works if you play with it to get it in the exact right position. This may be a bad unit.
Richard Ackerman
Reviewed in the United States on May 5, 2020
Seems to work well
Recommended Products
$449.00
$ 99 .00 $99.00