Shopping Cart

Your cart is empty.

Your cart is empty.

Hantek CC65 AC/DC Current Clamp 1mV/10mA 65A for oscilloscope 20KHz Bandwidth with BNC Connector (CC65)

Free shipping on orders over $29.99

$73.00

$ 34 .99 $34.99

In Stock

1.Style:Cc65


  • AC/DC frequency range: Up to 20 kHz,Effective Measurement Range: 20mA to 65A DC
  • It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
  • Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage.
  • And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
  • Application: Power circuit measurement and malfunction analysis;
  • Application: Motor drive of frequency converter (or other electronics) measurement;
  • Application:Power electronics equipments measurement.



Product Description

CC65

Method of calculation

  • When the current clamp range is set to 1mV/10mA, the actual current is ten times of the measured current whose unit is mA.

For example, the measured current is 10 mV and the actual current of the current-carrying conductor is 10×10=100mA.

  • When the current clamp range is set to 1mV/100mA, the actual current is one hundred times of the measured current whose unit is mA.

For example, the measured current is 5 mV and the actual current of the current-carrying conductor is 5×100=500mA.

ELECTRICAL (At 23±5℃, 70% R.H. maximum)

Efficient Measure Range:

1mV/10mA: 10mA to 2 A, multimeter range is set to DC or rms AC 200mV

1mV/100mA: 100mA to 20 A, multimeter range is set to DC or rms AC 200mV

20A to 65 A, multimeter range is set to DC or rms AC 2V

CC65

Captured Conductor Size:9mm max.

Captured Conductor Size

Range Switch

LED Light

Zero Button

CC65

BNC Plug Output

BNC plug can connect an oscilloscope to observe the current waveforms in the sreen.

CC65

Application Safety

  • The voltage of the conductor measured with the current clamp should be little than 300V DC or 240V rms AC.
  • We are forbidden to measure the conductor whose insulation has break down or wear down, in order to avoid doing harm to us.

CC65

Application Notes

In the case of DC current, the output is positive when the current flows from the upside to the underside of the clamp.

CC65

BNC Plug

CC65
Application

  • Power circuit measurement and malfunction analysis;
  • Motor drive of frequency converter (or other electronics) measurement;
  • Power electronics equipments measurement.

  • 20kHz Bandwidth, 1mV/10mA, 65A
  • AC/DC frequency range: Up to 20 kHz
  • Effective Measurement Range: 20mA to 65A DC
  • Operating Temperature:0℃ to 50℃ 70% R.H.
  • Storage Temperature:-20℃ to +70℃, 80% R.H.
  • Battery Type:9V DC, NEDA 1604, 6F22,0006P(Not include)
  • Battery Life: 100 hours typical with carbon-zinc

CC65 Parameter

AC/DC Frequency Range Up to 20 kHz
Effective Measurement Range 20mA to 65A DC
Captured Conductor Size 9mm Maximum
Low Battery Indictor Red LED Lighting
Operating Temperature 0℃ to 50℃ 70% R.H.
Storage Temperature -20℃ to +70℃, 80% R.H.
Battery Type 9V DC, NEDA 1604, 6F22,0006P (Not include)
Output BNC Plug
DCA Range 1 mV /10mA 1mV/100mA
ACA Range 1 mV /10mA 1mV/100mA

Raul Sierra
Reviewed in the United States on May 22, 2023
Lo probare y haré los comentarios respectivosLlego rapido
Aleiso ubeimar
Reviewed in the United States on December 4, 2023
Muy precisa .
Recommended Products

$1,070.99

$ 99 .00 $99.00

4.9
Select Option

$408.00

$ 99 .00 $99.00

4.4
Select Option

$17.99

$ 8 .99 $8.99

4.4
Select Option

$926.72

$ 99 .00 $99.00

4.4
Select Option

$1,265.99

$ 99 .00 $99.00

4.6
Select Option

$989.00

$ 99 .00 $99.00

4.6
Select Option

$432.00

$ 99 .00 $99.00

4.9
Select Option