Your cart is empty.
Your cart is empty.Product Description
Holds Your Phone/Tablet In Front Of The Remote Controller！
This mount holds the device in front of the remote controller instead of over top of it.
It will not block your view and you can makes accessing the buttons or seeing screen.
Light weight and strong
This bracket is all made of plastic, so it weighs only 230 grams. But different parts are made of different plastics, making the structure of the bracket strong enough. The bracket is made of nylon, which is strong and tough
Shawn
Reviewed in the United States on August 28, 2024
So, I ordered this drone screen holder thinking it was going to be the hero my drone adventures needed. It arrived quickly, looked sturdy enough to survive a minor apocalypse, and had more adjustment angles than a yoga master. I was ready to mount my tablet like a pro and start filming like the next Spielberg… or at least not crash into any more trees.But plot twist! After a little more fiddling with my stock controller, I discovered—wait for it—it could actually fit my device all along! Cue the facepalm moment of the century.I had to return the holder, but not because it wasn’t a great product. It was, in fact, pretty awesome. Built like a tank, with a grip so strong it could probably hold onto a greased watermelon, and it looked sleek too. If my stock controller hadn’t secretly been a closet overachiever, this screen holder would have been perfect.So, five stars for the product itself — sturdy, reliable, and stylish. Minus zero stars for my own failure to RTFM (Read The Fine Manual). If you’re on the fence and actually need a screen holder, go for it. Just make sure your stock controller isn't hiding any surprising talents first!
GatorWing
Reviewed in the United States on August 25, 2024
It is an outstanding product. Perfect for using a large screen tablet to fly my drone.Nothing negative.
Herman L Wolfe Jr
Reviewed in the United States on June 29, 2024
Wonderful product! Cellphones use so much edge swipe and screen buttons covered by the controller holders, I decided to give this a try. It is very ergonomic and comfortable not to mention the larger tablet area. The tablet grip is perfectly tight and I couldn't be more pleased. Don't forget your longer USB cable from this same manufacturer. Safe flights!
Jon
Reviewed in Australia on May 26, 2024
Not the quality you would want to trust to hold an expensive device! Be warned and buy something better!
William Domb
Reviewed in the United States on May 22, 2024
Ten times better than my old tablet support. Positions the controller and tablet exactly where they should be.Only quibble is that in use and when being moved, it's possible to move the connections and have to reset them.My suggestion is spend a day or two getting used to the unit and adjusting it accordingly, then flow a small amount of cyanoacrylate glue onto all the joints to hold them rigid.
Ferny Creek Guy
Reviewed in Australia on May 22, 2024
Great product, good quality.
Allyson Sofia
Reviewed in the United States on May 12, 2024
So As an avid flyer of my Mavic Drones, I feel that I will leave those most accurate thoughts after now using it for about 2 hrs or so. I will try to be as concise and clear about as many aspects as possible.Pros:Fits almost every tablet I tried out in the holder (except for the ipad Pro newer generations).Has great adjustability and stiff locking for the positioning of the tablet to the remote holderRemote Control is easily manageable and able to work with with good clearance to all the buttons and controls with easeCons:Material of the overall arms - Plastic and not very rigid when it comes to larger tablets, almost too flimsy.11.27" S7FE / S7 models of tablet fit, but over bear the weight of the mount and remote control for balance, making it hard to position correctly without the unit feeling top heavy and not sturdyEntire construction should be made from some type of metal or metal hybrid with stronger adjustment screws as well as the tablet holder for a more secure lock of the unit in the holder whilest in the remote.Overall, the unit does the job, I personally think if your tablet is above 10", it's going to be top heavy and awkward in holding and controlling. This is perfect for powerful tablets above 6" to 9.7" in measurement and stability. The weight of those tablets is less in comparison to it's larger counterparts, thus making it less top heavy in proportion to the holder body and the Mini SE, Mini 2, Mini 2 SE and it's variant drone remote RC controllers.
Christina
Reviewed in the United States on October 23, 2024
Worked well! You really have to tighten the thumb screws so your tablet doesn't move, but that's okay. It works fine. Thanks.
Donman
Reviewed in Australia on September 21, 2023
Fantastic
Steve Parry
Reviewed in Australia on July 30, 2023
I liked the concept of this but found that using it with a IPad was horribly balanced and uncomfortable to use but I did like it with a phone it was way better than having the phone between the grips..
Blarneystone
Reviewed in the United States on February 11, 2023
It's plastic so don't expect the stability of metal but the tradeoff is that it is light weight and it positions the tablet away from the controller screen which allows you to see that as well as not block your view of the pause or RTH on the controller. I'm a newer pilot, so a more experienced pilot would be going by muscle memory and not need to see the controller. The bracket that fits around the controller fits perfect on my DJI Mavic Pro Platinum controller. There is even a small cushion to help with a tight fit.Just a few complaints:1) The knob that holds the tablet bracket cannot be tightened enough to keep the tablet from moving. I added a thin piece of rubber in the socket and that seemed to help since it was just plastic on plastic and there was not enough friction. The rest of the bracket screws seem to hold nicely.2) The balance is not ideal. Just using the lanyard as designed, it is very weight forward with the tablet in place. I knew this going in, and I am considering attaching some string from the top of the tablet bracket back to the lanyard to help shift some of the weight back a little. For short flights its probably okay, for longer flights I can see this becoming an issue with hand fatigue. The spring loaded bracket holds the tablet very tight. I have no fear of that falling out.There are a lot of adjustment options to the brackets, so maybe tweaking this may help. Concern would be keeping the tablet away from blocking the antennas of the controller.For the price, it seems like a worth while investment.
Robertmtch
Reviewed in the United States on December 16, 2019
Design is better than others which put the device in front of the transmitter screen. One small shortcoming is the tether point is not exactly at the balance point, if you’re one who uses a harness or a neck strap. Plastic seems a bit marginal for my Ipad 10.2, but so far so good.
Recommended Products
$39.99
$ 19 .99 $19.99