Your cart is empty.
Your cart is empty.Product Description
NOTE! THESE ANCHORS FIT ONLY RANGER & GENERAL - See our other RZR Anchors listings.
PLEASE NOTE: THESE ANCHORS ARE FOR YOUR RANGER or GENERAL - THESE DO NOT FIT RZR or SPORTSMAN MODELS
NEW, IMPROVED DESIGN!
Our BEST-Selling, Top-Quality tie down anchors specially designed to fit Polaris Ranger and General ATVs have been redesigned for maximum gripping strength to securely attach your tie down straps, ropes or bungee cords.
Whatever your needs are, our custom, ribbed expansion plug provides 3x the gripping strength of the competitions' plug...and that means you will be spending less time worrying about what you’ve strapped down - and spend more time enjoying the ride!
PROUDLY DESIGNED and ASSEMBLED IN THE USA
The Original and Patented OEM ATV Anchor Alternative - We use a softer rubber compound that grips better so the anchor stays solid under harsh conditions. We also use a proprietary EPDM rubber plug designed to our specifications. All of our components are designed and rigorously tested right here in the USA!
Designed to fit Lock & Ride holes, GripPRO ATV Anchors fit tight and allow for easily adding and moving tie down points as needed, whether out on the trail or in the garage... No tools required - simply Twist, Lock and Go!
OEM QUALITY ATV ANCHORS - AT A FRACTION OF DEALERSHIP PRICES
Our RIBBED EPDM rubber anchor expands evenly and holds much better than other anchors...no matter what the temperature reads outside, (or what the day throws at you)...you can rest assured that our premium ATV Anchors are up to the task!
MOUNTS quickly and easily on your Polaris Ranger or General with a 1-7/16" inch hole in the cargo rack or bed...You get 6 Twist - Lock Anchors, so you can easily configure your tie down locations to fit any need. HAUL all your hunting, fishing, recreational or work gear securely.
Designed to FIT Polaris Ranger and General
EACH set includes: Six (6): 5/16" x 3 1/4" Eye Bolt Fasteners made by GripPRO ATV Anchors. Please verify your ATV or UTV has a 1 7/16" hole before placing your order.
These fit Ranger and General ONLY. See our other products for expansion anchors that fit other models with smaller holes...Like the RZR, Ace or Sportsman.
Customer
Reviewed in the United States on January 4, 2025
Easy to install. Fit Polaris perfectly. Instead of shiny eyebolts, could be flat black or camo for hunting units.
Customer
Reviewed in the United States on January 4, 2025
Easy to install. Fit Polaris perfectly. Instead of shiny eyebolts, could be flat black or camo for hunting units.
Junie
Reviewed in the United States on September 1, 2024
Fit good. Works great
Junie
Reviewed in the United States on September 1, 2024
Fit good. Works great
Charlie Liddell
Reviewed in the United States on July 24, 2024
Very EZ installation and very handy to tie down hauled items
Charlie Liddell
Reviewed in the United States on July 24, 2024
Very EZ installation and very handy to tie down hauled items
dillybar
Reviewed in Canada on June 29, 2024
I wanted to personally thank Greg and his staff at GripPRO for their exceptional customer service. I was so impressed by the way they treated me, that I purchased a 2nd set of anchors from them.CheersDave
dillybar
Reviewed in Canada on June 29, 2024
I wanted to personally thank Greg and his staff at GripPRO for their exceptional customer service. I was so impressed by the way they treated me, that I purchased a 2nd set of anchors from them.CheersDave
Charles C Urban
Reviewed in the United States on November 4, 2024
Good product fast shipping
Charles C Urban
Reviewed in the United States on November 4, 2024
Good product fast shipping
Pat
Reviewed in the United States on October 28, 2024
These ATV anchors are just what I needed to provide a secure anchor point in my Polaris Ranger. I can now strap tools and other farm equipment down without having to worry about it falling out. First rate products!! Highly recommended!!
Pat
Reviewed in the United States on October 28, 2024
These ATV anchors are just what I needed to provide a secure anchor point in my Polaris Ranger. I can now strap tools and other farm equipment down without having to worry about it falling out. First rate products!! Highly recommended!!
Freedom
Reviewed in the United States on October 16, 2024
Just drop it in and tighten. Sturdy tie downs and so far they sure are pretty.
Freedom
Reviewed in the United States on October 16, 2024
Just drop it in and tighten. Sturdy tie downs and so far they sure are pretty.
Zden
Reviewed in the United States on May 26, 2023
Very secure
Zden
Reviewed in the United States on May 26, 2023
Very secure
Treehugger49
Reviewed in the United States on March 2, 2023
I previously purchased a less expensive set of 6 anchors from another manufacturer. Other than the difference in color (blue v. black) of the rubber inserts, they appear to be the same, and their operation is identical. However, the reason I'm replacing the original ones is that after the first exposure to rain the top washer of the original ones began to rust. These were advertised as being stainless steel, although I suspect the actual tie-down eye is probably zinc coated steel. These were also very much easier to install by backing off the threaded eye until the rubber insert decompresses. At that point they slid into the Lock and Ride receptacles easily, and were readily tightened by turning the eye bolt until the insert expanded enough to secure them. The original anchors required lubricating the insert enough to get it to seat into the receptacles, an operation which some reviewers apparently had difficulty with. Time and exposure to the elements will tell if these hold up better than the cheaper ones.
Treehugger49
Reviewed in the United States on March 2, 2023
I previously purchased a less expensive set of 6 anchors from another manufacturer. Other than the difference in color (blue v. black) of the rubber inserts, they appear to be the same, and their operation is identical. However, the reason I'm replacing the original ones is that after the first exposure to rain the top washer of the original ones began to rust. These were advertised as being stainless steel, although I suspect the actual tie-down eye is probably zinc coated steel. These were also very much easier to install by backing off the threaded eye until the rubber insert decompresses. At that point they slid into the Lock and Ride receptacles easily, and were readily tightened by turning the eye bolt until the insert expanded enough to secure them. The original anchors required lubricating the insert enough to get it to seat into the receptacles, an operation which some reviewers apparently had difficulty with. Time and exposure to the elements will tell if these hold up better than the cheaper ones.
Lisa
Reviewed in Canada on July 8, 2021
I don't post many reviews but these anchors are worth my time! I have a 2016 Polaris ETX and they work perfectly! Going to order and extra set!
Lisa
Reviewed in Canada on July 8, 2021
I don't post many reviews but these anchors are worth my time! I have a 2016 Polaris ETX and they work perfectly! Going to order and extra set!
ddmc
Reviewed in Canada on January 8, 2021
Great Product, just costly.Used during this past deer season in my Polaris Ranger Box, they held secure.
ddmc
Reviewed in Canada on January 8, 2021
Great Product, just costly.Used during this past deer season in my Polaris Ranger Box, they held secure.
MarkD
Reviewed in Australia on July 13, 2020
Arrived in rural Australia quite promptly. Exactly as advertised, they are simple and effective. I have used them on my Polaris Ranger for general tie-down use.
MarkD
Reviewed in Australia on July 13, 2020
Arrived in rural Australia quite promptly. Exactly as advertised, they are simple and effective. I have used them on my Polaris Ranger for general tie-down use.
Stuart
Reviewed in Australia on December 12, 2019
Fitted and functioned as described. Extra heavy duty.
Stuart
Reviewed in Australia on December 12, 2019
Fitted and functioned as described. Extra heavy duty.
Recommended Products
$20.99
$ 10 .99 $10.99