Your cart is empty.
Your cart is empty.Product Description
Specifications
- Fan Size: 70x70x15mm
- Product size: 7.09x3.54x0.59"
- Speed: 1500-2800RPM
- Noise: 16-20dBA
- Heatsink : Aluminum
- Bearing: Dual Ball Bearing
- Connector: 4Pin 2510 PWM
GPU BACKPLATE COOLER HEATSINK
HIGH PERFORMANCE FANS + ALUMINUM
Over heating is the No.1 issue to short device and system life.nowadays cooling fan is becoming more and more essential because of its effectiveness and easy installation.
The gpu backplate cooler was designed for RTX 3090,also can be compatible with RTX 3080 3070 and other flat universal video graphics cards.
- Upgraded 2x70mm dual ball bearing fan (while others 50mm) for better cool capacity but not noisy.
- Upgraded elastic latch,compared with others,it is more flexible and sturdy,very easy operation.
- Upgraded 1.5mm thicker aluminum (while others 1mm),larger area of dissipation.
WHY NEED TO ADD EXTRA HEATSINK?
We can learn from the picture that the GPU memory position is over heating,only thin aluminum can not solve the over heating issue,especially with high power DDR67.
GPU TEMP DECREASED SOON !
After installed our backplate heatsink ,the GPU temp drop down from 70℃ to 48℃.
ATTENTION ! NO THERMAL PAD
- GPU Backplate Heatsink(aviation aluminum 6061 with 2x70mm high performance pwm cooling fans).
- Themal Pad (no thermal pad,please use your prefered high power consumption thermal pad for better cool capacity, see picture showed right side).
- Graphics Card ( the backplate heatsink can compatible with most universal flat graphics card especially for GeForce RTX 3090).
OPERATING TIP: Due to the sharp edges of this gpu cooling kit, please wear gloves before touching it to ensure safe handling.
Real feedback from customer,applied to RTX 3090
Max
Reviewed in the United States on April 19, 2025
I honestly wasn't expecting much from this cooler, but it's not that bad. I have an RTX A6000 blower style workstation card which runs very hot. Temperatures are generally around 88 to 90c. While Nvidia states that this is considered an "acceptable" temperature range under full load, I don't. With the backplate cooler its lowered the memory, hotspot, and GPU temps by around 8-10c. It's not a huge leap in lowering temps, but it's still better than running it extremely close to its max temp of 93c.The reason I'm giving it 4 stars is the elastic ties. Another review stated the same issue of the ties not creating enough pressure, which is true. If it had a bit more pressure the temps would probably be a little lower. You get what you pay for, and for $30 you can't expect a miracle. If you just want to shave a few degrees off of your GPU temps, this will work.
CreoX
Reviewed in the United States on February 19, 2024
Good morning,I installed this gizmo last night over Nvidia GTX with different mounting solution.I used 0.5 mm thermal pad and thin MIL spec nylon rope to secure heatsink in place.Result of the AIDA64 stress test revealed that temperature dropped approximately 7C at idle and 3-4C at high load depending on the time.However, besides this mod I also replaced thermal pads within the video card and applied high efficient thermal paste between GPU and the heatsink.So with that I am not giving 100% credit to this heat sink, however I do claim that it contributes well into video card temperature reduction. For that reason I gave it 5 stars.Hope this will help.Thank you for your attention & have a great day!
wDylan
Reviewed in the United States on May 12, 2023
IT WORKED! The heat sync with the two built-in fans dropped my GPU temp by almost 10 deg Celsius! It was a last ditch effort before replacing the card & IT WORKED! Couldn’t be more thrilled with this purchase.
Alexander H.
Reviewed in the United States on March 4, 2023
no thermal pad
Anthony
Reviewed in the United States on March 31, 2023
Upon further investigation it product says it doesn't include a thermal pad but it's very well hidden there is also a list of the items in the box and a thermal pad is included, all in all the cooler does well for what's it's intended for, it cools the back of the card. Don't expect a 20 degree difference but easily a 4-7°C Drop in temps.
Álvaro Laserna
Reviewed in the United States on August 28, 2022
Product came with that detail. No thermal pad as described in the video tutorial (ad is misleading as it numbers the products provided). Waiting to see if turns out other issues
aigomorla
Reviewed in the United States on August 10, 2022
If it had a better mounting system i would give it 5 stars.The fans are quiet, the heatsink is fairly large.Its just the tie mount system it has sucks.It wont apply enough contact pressure to the backplate, to provide good heat transfer.I had to use thermal tape on the edges, and then fill the middle with thermal paste.The heatsink tho, keeps the backplate on my 3090 nice and cool.
John Brant
Reviewed in the United States on October 1, 2022
First off the metal is unfinished. You really need to use the gloves. Even with them I cut my fingertip twiceSecond off, the fan blades and plastics are very cheap. Be careful. They will snap easily.Thirdly... The cords used to adhere it to the back of the GPU are a pain to use and honestly suck to get just right. Once they are on there they work well enough.The temperature difference is probably like 2-4c if that.Really overall not worth the hassle in my case.Especially for the price and the fact it doesn't include a thermal pad.
Recommended Products
$27.98
$ 13 .99 $13.99