Your cart is empty.
Your cart is empty.Product Description
Tinted 7 Color Series Gauges feature a black dial, tinted lens and illuminated red needle. On or off, it delivers a stealth-like appearance courtesy of the tinted lens. Each gauge is also equipped with stepper motor technology, creating a combination of accurate readings and smooth needle movement.
Andrew William Keeley
Reviewed in the United States on January 9, 2025
Since this is one of those things very easily construed as “operator error” or failure to install correctly, I had mine working for awhile. Something happened, maybe it got cooked, maybe I went over a speed bump too fast and it shut off completely. Screwed around with the wiring going over everything again and couldn’t find the issue. Contacted glow shift and they had me send it it for review, they sent it back and it worked again. Idk here’s better options. But if you want to be cool 1990s street racer you need to have all the RGBs.
Anthony
Reviewed in the United States on January 12, 2025
The accuracy, fit, form and function of this gauge is worth the money. I recommend this to anyone look for inexpensive temp gauge.
Customer
Reviewed in Canada on September 18, 2024
This gauge looks nice, matches my glowshift boost gauge nicely. My only gripe is that when you initially turn it on, there's a weird noise from the motor as it does 1 sweep of the needle. After that it operates nice and quiet.
Phillip Bartels
Reviewed in the United States on September 14, 2024
This product has already saved my beloved shitbox from overheating. The factory guage just isn’t accurate enough. Would recommend this product.Worning, do not utilize “constant 12v” from the radio. It will reset the colors every time the vehicle is started
John
Reviewed in the United States on May 29, 2024
Needed new gauges for this 1966 green tractor. Yes they work and work well it took about an hour for complete install. I did have shop at the plumbing section of a hardware store. They seem really nicely made. C’mon!!
markis jay greif
Reviewed in the United States on November 5, 2024
These gauges look nice and are a great price they are bright and accurate easy to install. People say they are cheap and low quality but I found that the wiring is the hard part of the install and believe people don’t connect the wires good enough then the signal is bad I’ve had these for over a year now with no issues
Orville Jacobs
Reviewed in the United States on July 28, 2023
Seems to work well. I like it better than my old gauge and it looks a lot better. The only thing is it says the car is running cooler than what my old gauge said the car was at for the temperature. So I'm just hoping that it is reading correctly.
Grind_the_Ocean
Reviewed in the United States on April 7, 2021
Works great and looks even better. My stock gauge went out so I bought this one. Seems pretty accurate for the most part. My thermostat opens at about 190F and the temp goes down at exactly that. I used an inline radiator hose fitting for the temp sensor. Easy to install.
Mark M
Reviewed in the United States on February 4, 2016
I purchased four of these various gauges and they're worth every penny. I really like the customizing color capability. They fit perfectly in the GlowShift Pillar Pod too. Instructions were very simple and easy to follow. Customer support was also extremely helpful as I had to contact them for the following reason....After installing all the gauges and testing them I could not get the gauges to change colors. Also, on two of the four gauges the button for changing colors would not depress. Technical support stated that the buttons would not depress because I turned/adjusted the gauges from the outside bezel ring, which turns the bezel ring just slightly and jams the button. As instructed I pulled the gauges out of the pod just enough so I could grab the gauge from the main body and turn it to align as need and turn the bezel back to release the pressure from the button. The buttons then worked properly but the colors still did not change due to the second reason stated by tech support. The instructions inform the user to use a 3 amp fuse if wiring directly to the battery such as I did. Instead of running 4 lines and 4 fuses I ran one main line (fused) from the battery and into the pod. I then tied each gauge into the main line. This proved to be another problem in proper operation since the 3 amp fuse was not enough for all 4 gauges. I replaced the 3 amp fuse with a 7.5 amp and everything works great. It would have been nice to have this information about the bezel ring and wiring method added to the sheet instructions but the tech support was great.
Recommended Products
$28.73
$ 12 .99 $12.99