Your cart is empty.
Your cart is empty.Product Description
No need to drain water lines, sprinkler systems, or hot water systems before cutting pipe or tubing. The Cold-Shot keeps pressurized systems operating while you make repairs. It freezes all type of liquids in steel, copper, cast iron, aluminum, and plastic pipes ranging from 1/8" to 2" (10 mm - 60 mm) using carbon dioxide (CO2). Dip-tube type cylinders are available at all welding supply houses. The Cold-Shot is faster and less expensive than "refrigerator-type" units; faster and uses less CO2 than "bag-type" units. In five minutes you're ready to go to work on copper tubing, just three minutes for cast iron pipe. - 10 sets of freeze heads: 1/8" iron or 1/4" copper 1/4" iron or 3/8" copper 3/8" iron or 1/2" copper 1/2" iron or 3/4" copper 3/4" iron or 1" copper 1" iron or 1-1/4" copper 1-1/4" iron or 1-1/2" copper 1-1/2" iron 2" copper 2" iron
From the Manufacturer
No need to drain water lines, sprinkler systems, or hot water systems before cutting pipe or tubing. The Cold-Shot keeps pressurized systems operating while you make repairs. It freezes all type of liquids in steel, copper, cast iron, aluminum, and plastic pipes ranging from 1/8" to 2" (10 mm - 60 mm) using carbon dioxide (CO2). Dip-tube type cylinders are available at all welding supply houses. The Cold-Shot is faster and less expensive than "refrigerator-type" units; faster and uses less CO2 than "bag-type" units. In five minutes you're ready to go to work on copper tubing, just three minutes for cast iron pipe. - 10 sets of freeze heads: 1/8" iron or 1/4" copper 1/4" iron or 3/8" copper 3/8" iron or 1/2" copper 1/2" iron or 3/4" copper 3/4" iron or 1" copper 1" iron or 1-1/4" copper 1-1/4" iron or 1-1/2" copper 1-1/2" iron 2" copper 2" iron
Khalil Hidayah
Reviewed in the United States on November 8, 2023
there was a missing part in the kit which makes it unusable , the manufacturer is not answering and the cost of shipping to return the item is 565 us dollars , so i lost the whole item
Khalil Hidayah
Reviewed in the United States on November 8, 2023
there was a missing part in the kit which makes it unusable , the manufacturer is not answering and the cost of shipping to return the item is 565 us dollars , so i lost the whole item
Wilson
Reviewed in the United States on July 23, 2021
The media could not be loaded.
Wilson
Reviewed in the United States on July 23, 2021
The media could not be loaded.
John Weimer
Reviewed in the United States on August 26, 2020
Have used many times. This is a huge time and labor saver. Works great and without any issues. Just follow the directions for the pipe type, size and fluid and when the time has elapsed, cut your pipe worry free.
John Weimer
Reviewed in the United States on August 26, 2020
Have used many times. This is a huge time and labor saver. Works great and without any issues. Just follow the directions for the pipe type, size and fluid and when the time has elapsed, cut your pipe worry free.
Chummy
Reviewed in Canada on September 8, 2019
Amazing product used it once paid for it self and saved me at least $300
Chummy
Reviewed in Canada on September 8, 2019
Amazing product used it once paid for it self and saved me at least $300
WILLIAM ILIEV
Reviewed in the United States on July 30, 2019
To Whom It May Concern,We purchased the Cold Shot on _________, and used it for the first time last week. The product did not perform the way it was supposed to and caused a leak on the property we were working at. Thankfully, my team was able to act quickly to prevent further damage. I wish to return the unit as it doesn't function as advertised. Thank you.Regards,ILIYA ILIEV
WILLIAM ILIEV
Reviewed in the United States on July 30, 2019
To Whom It May Concern,We purchased the Cold Shot on _________, and used it for the first time last week. The product did not perform the way it was supposed to and caused a leak on the property we were working at. Thankfully, my team was able to act quickly to prevent further damage. I wish to return the unit as it doesn't function as advertised. Thank you.Regards,ILIYA ILIEV
Bob F.
Reviewed in the United States on July 29, 2018
Time saver for piping repairs on Large Boiler systems, Schools, Churches, ect. Also good for domestic water systems
Bob F.
Reviewed in the United States on July 29, 2018
Time saver for piping repairs on Large Boiler systems, Schools, Churches, ect. Also good for domestic water systems
Joe
Reviewed in the United States on June 14, 2018
works well on small pipes, we needed to freeze 1-1/2 pipe and this seems to be too large to freeze up properly, not the equipments fault, just wrong application
Joe
Reviewed in the United States on June 14, 2018
works well on small pipes, we needed to freeze 1-1/2 pipe and this seems to be too large to freeze up properly, not the equipments fault, just wrong application
Kyle R McCombs
Reviewed in the United States on November 22, 2018
My shut off valve on my main service failed allowing water to always flow by. I bought this kit as I am a DIY guy who always likes to have the cool toys. I used a regular co2 tank with NO dip tube but I flipped the tank over so the valve was on the bottom. Worked like a charm on my 3/4 service, I let it freeze for 7 minutes and went to work. I spent probably 20 minutes or so working then shut it off. It took at least an hour or two to thaw BUT it was also 12* outside (Though it was 5' down into a hole I put a piece of foam over) I am very happy with this, hopefully I will get to use it a few more times in my lifetime.
Kyle R McCombs
Reviewed in the United States on November 22, 2018
My shut off valve on my main service failed allowing water to always flow by. I bought this kit as I am a DIY guy who always likes to have the cool toys. I used a regular co2 tank with NO dip tube but I flipped the tank over so the valve was on the bottom. Worked like a charm on my 3/4 service, I let it freeze for 7 minutes and went to work. I spent probably 20 minutes or so working then shut it off. It took at least an hour or two to thaw BUT it was also 12* outside (Though it was 5' down into a hole I put a piece of foam over) I am very happy with this, hopefully I will get to use it a few more times in my lifetime.
Customer
Reviewed in Canada on February 5, 2016
tool worked as it was described. thank you
Customer
Reviewed in Canada on February 5, 2016
tool worked as it was described. thank you
Mike B.
Reviewed in the United States on August 30, 2010
Ordered this unit and even though it took 3 weeks to get and 1 peice broke on the first use I am still giving it a 4 star rating, here are my reasons:1. They called me back to let me know the first unit got damaged in transit and they were sending out a replacment. Although I did have to call and inquire as to were my order was to initiate the return call it is still understandable.2. The part broke and I called the 800# on the back of the instruction manual and without hesitation they asked for my address to send me the new part. SOLID3. The unit works great and since my on-site plumber had one as well I was able to use his CO2 brass tee to complete my project and it worked great.A few hickups is no reason to be disgrunteled and the only reason I did not give it 5 stars is the 3 reasons above and it takes more CO2 than advertised to freeze a pipe.
Mike B.
Reviewed in the United States on August 30, 2010
Ordered this unit and even though it took 3 weeks to get and 1 peice broke on the first use I am still giving it a 4 star rating, here are my reasons:1. They called me back to let me know the first unit got damaged in transit and they were sending out a replacment. Although I did have to call and inquire as to were my order was to initiate the return call it is still understandable.2. The part broke and I called the 800# on the back of the instruction manual and without hesitation they asked for my address to send me the new part. SOLID3. The unit works great and since my on-site plumber had one as well I was able to use his CO2 brass tee to complete my project and it worked great.A few hickups is no reason to be disgrunteled and the only reason I did not give it 5 stars is the 3 reasons above and it takes more CO2 than advertised to freeze a pipe.
Recommended Products
