Your cart is empty.
Your cart is empty.Product Description
Save energy and money with the GE-branded 3-Way Push Button Rotary Dimmer. Ideal for replacing a standard switch, this push button dimmer provides smooth dimming performance through single pole or three-way installations. Adjusting light levels with the dimmer's full range of light controls can significantly reduce your home's energy costs! The dimmer allows you to adjust the lighting in any room to fit any situation - turn the lights up when you have company or dim them for a movie. The push button comes with a light almond knob, as well as a white knob to complement existing décor, no matter your style. Compatible with single hole traditional style wallplates, this switch features a sturdy housing with removable tabs for multigang installations. This dimmer works with incandescent, dimmable LED and dimmable CFL bulbs. Use indoors only with one-switch or two-switch, permanently installed incandescent lighting fixtures — wallplate not included. This product is UL listed and backed by a one-year no-hassle replacement policy. Update your current lighting with a GE-branded 3-Way Push Button Rotary Dimmer.
From the Manufacturer
Adjusts light levels to reduce energy costs
Eric Stanley
Reviewed in the United States on June 5, 2024
I do regular maintenance and upgrades to a few dozen rentals...and when a dimmer is called for (see-LED recessed fixtures), this is the one I go to everytime. Not the absolute cheapest available but ease of install and 100% reliability make the extra few bucks well worth it to me.Looks great, functions even better. No noise, no flicker, no problems.
Dan
Reviewed in the United States on June 28, 2024
I used this to replace a 3 way light dimmer switch that I blew up when reinstalling a ceiling fan thatwas not installed properly. I had the Ends of the wires capped off but the wire had some insulation missing that I also had to repair. SWITCH was simple. But the Ceiling fan had to have the mounting box installed from the attic. We all know how much fun that was ! But in the end the fan is sturdy and the lighthas a 3 way with dimmer.
Dwolfo
Reviewed in the United States on November 8, 2024
What can I say? It turns the lights on and off. With the built in dimmer slide it dims the lights. What an amazing concept. A light switch that works as expected.
Lawrence Prince
Reviewed in the United States on November 7, 2024
Reasonable price, decent value.works fine.
Phil Jones
Reviewed in the United States on November 4, 2024
This switch does a really good job of dimming the old time hunter fans and lights. And, once you get them to that perfect brightness, just push it to turn things off or back on again. It remembers where the lights were dimmed, so they come back on at that same brightness.
S. Tum
Reviewed in the United States on April 18, 2024
Works. Mounted right up. Has a slow fade in when first switched on rather than the instant on switch I used to have prior. Works fine, just different.
Kelly matthews
Reviewed in Canada on May 3, 2023
I have been waiting to purchase this dimmer for a long time. My dining room is very bright and hurt the eyes. Now with the dimmer, my living area and dining area look nice and cozy.
Amarjit
Reviewed in Canada on November 18, 2023
It’s really nice 1. 10/10
MagaRam54
Reviewed in Canada on January 6, 2023
Easy to install. Works great. This switch is not used in a multi-switch setup.
Rafael Oscar Cruz
Reviewed in Mexico on February 16, 2022
Muy buena calidad. Funciona perfecto y tiene mucho mejor precio que los Leviton
pat rivers
Reviewed in Canada on February 27, 2021
Arrived broken
HGW
Reviewed in the United States on September 19, 2020
I bought this item because I thought General Electric products are generally well designed. This particular item is not up to usual GE design standards.There are four things I dislike about this product, which replaces an old dimmer switch that's been there for years, which has begun to produce flickering light. The four things I dislike are as follows:[1] The post that the dimmer knob plugs onto is too long. As a result there is too much gap between face plate and dimmer knob, which looks bad.[2] Unlike the dimmer switch this replaces, you cannot screw a standard faceplate with a rectangular slot flush with the wall, which looks terrible. This is because of poor design. At the base of the post that holds the dimmer control knob there is a 19/32" retaining nut which is too wide to pass through the 17/32" width of the slot of a standard face plate. As a result the faceplate stands away from the wall with about a 1/8" gap. Which looks terrible. The previous rotary switch did not have this problem. Replacing the original plate with one with a circular hole had one problem: the original was a special custom plate that cost a lot, carefully matched to the decor.[3] The dimmer switch it replaces was able to dim from zero light to full power. This dimmer switch will not dim to zero. Maybe this is a necessary safety feature ? Or is it just careless design ?[4] The wire ends you connect to the power wires are soft braided multistrand wire not stiff enough to work well with the stiff copper wire coming from the wall, when you twist on the wire connector nuts.Because of problems [1] and [2], I found installation a real hassle. and so am awarding just one star.I hate to think of spending time returning this frustrating product and hoping that the replacement will be as good as the old switch I am replacing.Overall a bad experience.
V. Tran
Reviewed in the United States on April 21, 2020
Great little summer, and I like the fact you can keep a dimness level set when you turn on and off. The only issue I have is that I have the switch hooked up to 3 Maxxima 6" thin LED ceiling lights, while it works very well, no flicker or anything, it dims them very well; it's just that last 3rd of sliding the dimmer to the lowest setting (which works fine and perfect) it will not turn on at that lower setting. Once I slide it past halfway to full, it works fine in and off.It's a minor thing, and I think it it's because its connected to very low power LEDS, so not really an issue since the dimmer works fine, it's just the in at the lowest display setting not working, but again works fine as soon as you slide it up.
Recommended Products
