Your cart is empty.
Your cart is empty.The Skylark LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Skylark dimmer features slide knob to adjust your light to any activity. Use the rocker switch to turn your lights off or on returning the lights to your favorite level. Coordinating Claro wall plate sold separately.
miz_avital
Reviewed in the United States on March 5, 2025
After replacing my bedroom LED ceiling lights with CREE high-hats, I experienced LED ghosting. So I replaced my dimmer switch with this Lutron dimmer and 'bam' it fixed my problem. I've used Lutron dimmers before in my whole home and they are the best. Easy to install if you are a little handy. Lots of tutorials on Youtube. It took me 15-20 min to install. I am very meticulous about everything being staright and aligned so I took my time. Make sure to use the ground wire and you probably want to disconnect your circuit breaker to avoid being shocked. I didn't cause I'm a pro and extremely careful, but just as a precaution you probably should. Anyway, very high end quality dimmer. Would not buy anything else. Good Luck!
Justin J.
Reviewed in the United States on February 24, 2025
Fits well and operates perfectly, doesn’t break the bank and it’s well built.
Huntbeach1
Reviewed in the United States on February 19, 2025
Came quickly except I ordered it with the plate and that won’t come for a couple weeks so I’m trying to figure out how to cancel the plate. I use the existing one I had. It’s easy to install. There’s a video that you can go to and it shows you how to install it very easy and I’m very happy with the way it works
Nik
Reviewed in Canada on January 5, 2025
Works well, dims the lights with ease no flickering easy to install
Gerry
Reviewed in Canada on July 20, 2024
Easy install with clear instructions , timely shipping & did what it said it would do..
christopher ambrosini
Reviewed in the United States on July 18, 2024
Did quite a bit of reading to ensure that this Lutron Dimmer would be compatible and work with the 6HALO HLB 6 inch Recessed LED Ceiling & Shower Disc Light – Canless Ultra Thin Downlight – 5 CCT Selectable - White - 6 Pack.Happy to report, the dimmer works really really well, perfect ability to control the lights from 0 - 100% brightness, no issues.I'll be purchasing at least 1, if not 2 more of these as I install some more Halo 6 inch Recessed Canless Disc lights.
Dundee
Reviewed in the United States on June 5, 2024
This is a quality on/off light dimmer switch. No hum and the light will dim very low. Works great with even light across up to 4 dimmable LED bulbs. If your light has 5 or 6 bulbs, one or two bulbs will be a bit brighter than the rest. But it will still work.Someone mentioned in a review that you can't have two of these switches next to each other because of the metal fins on the side crowding the space not allowing them to fit in a two-hole cover. Not so. They WILL fit. The metal fins are creased so you can easily bend them with pliers and break 3 of them on one side or all 6 on both sides off clean.
Alex Pr.
Reviewed in the United States on November 15, 2024
Well built and easy to install. Works well with the LED lights.
Diane Dynamite
Reviewed in the United States on November 13, 2024
Had to replace the one in my bedroom because the other one wouldn’t dim correctly. Works like it’s supposed to. Easy to hook up, only took a few minutes. I recommend.
Peter L.
Reviewed in Canada on September 21, 2022
I used this switch to replace an older dimmer, as I was upgrading my basement lighting to LEDs and wanted to retain the ability to dim the lights. The quality is great, the install was as easy as any switch, and the versatility (light types & switch combinations) make this switch a winner.
Kat Osborn
Reviewed in Canada on March 6, 2020
I have never installed a dimmer switch before, so when I opened the instructions and couldn't find my simple wiring, I was confused. I mean, do I really want to guess when it comes to electrical? My initial guess was correct, but still... I checked their website and they had a great instructional video. To make it easier I would have preferred a simple diagram but it's not a huge deal. Anyways, the switch works great and I'm really pleased. Just in case you are a newby like me, I have posted a pic of my wiring. Or simply put, green to ground, black to black, red to white and just cap off the remaining red & white wire that hangs from the switch.I would definitely buy again, even though it seems expensive to me. Happy to have it in grey.
MANE-AM-MX
Reviewed in Mexico on August 6, 2016
Buen producto, ahora si que se tiene que comprar la tapa aparte para Lutron CW-1, lo muestra en la foto pero se tiene que comprar la tapa aparte, con respecto a la compatibilidad de focos en su pagina indica la compatibilidad pero no me a dado problemas con los focos Philips claro que el foco debe de decir compatible con dimmer.
John Wing
Reviewed in the United States on August 21, 2015
This dimmer works great with dimmable LEDs. I installed it in our dining room for use with some LE® 9.5W Dimmable E26 LED Bulbs (http://www.amazon.com/gp/product/B00QLJHFMA?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_134) and it works better than I had anticipated. I have heard from many others that LEDs will not dim as low as incandescent bulbs, but with this combination the bulbs will dim all the way down to just a slight spark of light. The dimmer has a range adjustment switch on the side so that you can adjust how low the lights will dim with the slide all the way down, which is nice so you can set it so that the bulbs put out the minimum required light when the slider is all the way down, and they won't go completely off without actually turning off the flip switch below the slider. Installation was easy, the instructions included are clearly written and anyone that has ever done even the least little bit of light switch installing will be able to install this. Make sure to check what type of switch box you have currently installed, because if yours are like mine, they are the all-in-one switches meaning that the electrical box is part of the switch, so when you replace them with ones like this one, you will need an Old Work Electrical Box (http://www.amazon.com/Lamson-Home-Products-B114R-UPC-Work/dp/B000GATNU2/ref=pd_sim_60_71?ie=UTF8&refRID=1MVJ1BQQX2D8FGV9JPHQ) in whatever size you have (Single, Double, Triple, etc Gang). Also, since this is a dimmer, it has a box on the back of the switch that sticks out quite a bit. You can make it work with a regular depth box, but a over sized depth box (http://www.amazon.com/Carlon-BH234R-Outlet-8-Inch-Length/dp/B0007N738M/ref=pd_sim_328_9?ie=UTF8&refRID=18XDRESVRRPRN9F2V32W) is recommended, especially if you have multiple runs coming in and out of the box. If you have the shallow boxes though, you will not be able to install this without changing the box. Overall I am very pleased with this dimmer, as well is my wife, and we all know that if the wife is happy everyone is happy.
Recommended Products
