Your cart is empty.
Your cart is empty.Product Description
-
Strength and Durability
A thicker pole is generally stronger and more durable than a thinner one. This increased strength allows the tire hook to withstand higher loads without bending or deforming. It is especially important when the tire hook is intended to support the weight of heavy tires.
-
Heavy-Duty Hooks
Some tire hooks are designed to be heavy-duty and can support larger or heavier tires, such as those for SUVs or trucks. These hooks may have higher weight capacities.
-
Optimized Space Utilization
By utilizing a double hook design, users can make more efficient use of available space for tire storage. The dual hooks allow tires to be stacked or arranged in a way that maximizes vertical space while maintaining stability and accessibility.
-
Protection Against Scratches
Rubberhook lagging provides a protective layer that helps prevent scratches and abrasions on the surface of the tires. When the hooks are coated with PVC, they create a soft barrier between the tire and the metal hook, reducing the risk of cosmetic damage to the tire sidewalls.
-
Space Saving
Tire hooks help maximize floor space by allowing you to hang tires on the wall or ceiling. This can be particularly useful in smaller garages where floor space is limited.
-
Strength and Durability
A thicker pole is generally stronger and more durable than a thinner one. This increased strength allows the tire hook to withstand higher loads without bending or deforming. It is especially important when the tire hook is intended to support the weight of heavy tires.
Dawn Colon
Reviewed in the United States on May 6, 2025
Packaged well. Very sturdy, exactly what I needed. Highly recommend!
Jason Loosle
Reviewed in the United States on September 13, 2024
These hangers work exactly as described, they came assembled and ready to be used and they seem very sturdy. I haven't tested it with the full 150 lb limit that is advertised, but it holds up all of my heavy tools and objects no problem, which probably would be like 45 to 50 lbs each. These were easy to set up and would work excellently either in a garage, shed, or just straight in your backyard.
SeñorSaltos
Reviewed in the United States on August 12, 2024
I really like these heavy duty garage hooks. They are long and sturdy, so you can't fit multiple things on them. They're versatile because you can hold a lot with just 1 hook or you can hold something more substantial using both. Easy to install. Highly Recommend.
Eric Taylor-Wise
Reviewed in the United States on July 20, 2024
These hooks are extremely robust and should hold just about anything you want to put on them.Make sure you anchor them in really well though.The rubber coated hooks keep things from getting scratched and also prevents slipping.I mounted them higher up on the wall and can store my extension ladder on them. I tried storing 2x4 lumber on them at first, but it wasn't really a great use of them and I needed the ladder out of the way.
Jules
Reviewed in the United States on May 7, 2024
These are definitely HEAVY DUTY! It's pretty heavy on its own, the metal doesn't bend, and the rubber grip is fairly thick and doesn't slide around. These hooks are extra long (over a foot!) if you need to store a lot or something extra bulky. I installed these into wood with just the screws (did not use the included plastic anchors) and feel confident it's not going anywhere. I stored 2 snow shovels and a leaf blower on one, and a weed whacker and 2 outdoor extension cords on the other. There's still plenty of space and ability to hang more and heavier.
Denise
Reviewed in the United States on November 4, 2024
I didn't want to hang peg board or some other storage kit solution which is all I find these days in the big box hardware stores. These provided the option of drilling them directly into the studs to hang items out of the way in basement storage area or garage. I'm using these to hang a couple walkers out of the way until they are needed again.
Shelby Yee
Reviewed in the United States on April 30, 2024
If you need stuff hung up in your garage LOOK NO FURTHER. These were easy to hang up on the wall. I would recommend real concrete screws though. Luckily, I had some on hand. The ones that came in the box just weren't doing the job where I needed them hung. I have one holding 5 name brand shovels and the other is holding a post hole digger, a gardening hoe, a hand tiller and a manual edger, WITH NO BENDING of the hooks! I call that a win any day of the week! It has really freed up a lot of space on my garage floor. I 100% recommend these hooks!
Amazin' Grandpa
Reviewed in the United States on April 29, 2024
These double arm support organizers from INDECKMO will fill a critical need in my new but already overflowing garden shed. I will install these 12 1/2" supports in place of a couple of short ones that I installed last year and these will provide storage support for a bunch of shovels, hoes and other tools which are currently languishing against the wall.I appreciate that they have added a rubber sleeve onto each arm on these. That will ensure that these can be used for many storage applications beyond the garden tools which I plan for.These are good looking supports with the arms welded into the back mounting plate, welded from the backside with a full circumference weld bead. I do wish that the arms were bent at 90 degree angle and welded to the front of the mounting plate like many other designs instead of the small bead around it on the backside of the plate. This construction looks very neat and will support quite a bit of weight but I do not expect that it will consistently support the 150 lbs listed without bending, whereas with the rods bent and welded on the front I know that they would. In my case these will work since my loading will likely be below 30 lbs.There are 2 mounting screw holes in each plate. That should be sufficient when they are mounted directly to a stud and without using the plastic wallboard expansion components included. If you are mounting these to wallboard ( not Sheetrock ) then I would recommend drilling your own holes and mounting with 4 screws each, or at least 2 screws on the top side of the plate. The long, 12 inch cantilever will very quickly create greater force on the mounting fastener than it can retain.
Recommended Products
$19.99
$ 8 .99 $8.99