Your cart is empty.
Your cart is empty.Product Description
THIS IS FNIRSI 2C53P UPGRADE MODEL WITH CARRYING CASE--NO NEED TO BUY AN EXTRA CARRYING CASE
FNIRSI 2C53P Oscilloscope/Multimeter/DDS Signal Generator
Upgraded from 2C23T, FNIRSI 2C53P not only has combined the functions of dual channels oscilloscope, digital multimeter and signal generator, but also highly improved its performances in all aspects you could imagined. It is touchscreen, handheld and portable, easy for electricians or DIY enthusiastics to use outdoor and indoor.
Basic Parameters
- Screen size & resolution：4.3 Inch (480*272 pixels)
- Screen material：Surface tempered glassSurface tempered glass + touch screen made of glass GLASS + IPS color screen
- BacklightBacklight brightness can be set
- Power supply：TYPE-C（5V/2A）
- Battery：4000mAh lithium battery
- Language：Chinese, English, Pyccкий, にほんご, español, Português, Deutsch, 한국인
- Product size：about 145x98x35mm
- Product net weight：about 360g
Multimeter
- DC Voltage：1.9999V/19.999V/199.99V/1000.0V
- AC voltage：1.9999V/19.999V/199.99V/750.0V
- DC current：19.999mA/199.99mA/1.9999A/9.999A
- AC current：19.999mA/199.99mA/1.9999A/9.999A
- Resistance：19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ/1.9999KΩ/199.99Ω
- Capacitance：999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF/9.999mF/99.99mF
- Temperature：(-55~1300℃)/(-67~2372℉)
- Diode：Yes
- Continuity test：Yes
Signal Generator
- Channel：Single channel
- Frequency：0-10MHz（Sine wave: 10MHz, other waveforms 5MHz）
- Amplitude：0.1V-3.0V
- Square wave duty cycle: 0-100%
- Signal type：sinusoidal wave, square wave, sawtooth wave, half wave, full wave, positive step wave, negative step wave, DC signal, exponential rise, exponential fall, multi-audio, and sync pulse
WHAT IS INLCUDED IN THE PACKAGE:
- 1. 2C53P（2CH Touchable Oscilloscope Multimeter 3in1）*1
- 2. P6100 Probe *2
- 3. Multimeter probe *1
- 4. Alligator clip probe *1
- 5. Data cable *1
- 6. Product Manual *1
- 7.Carrying bag*1
Oscilloscope
- Channel：Dual channel
- Analog bandwidth：50MHz
- Real-time sample rate：250MSa/s
- Storage depth：Up to 64kByte
- Input mpedance：1MΩ
- Time base range：10ns/div - 10s/div
- Vertical sensitivity：10mv/div - 10v/div
- Vertical resolution8 bits
- Maximum measured voltage：±400V
- Probe：1x/10x
- torage space：13M
- Bandwidth limitSupport 20MHz limit
- Trigger mode：AUTO/Normal/Single
- Trigger type：Rising edge, Falling edge
- Trigger level range：8 cells (positive/negative)
- Waveform display mode：XY/YT/Scroll
- Coupling method：AC/DC
- Measured data：Period, frequency, peak-to-peak value, maximum value, minimum value, Average value, effective value, amplitude, duty cycle, pulse width
- Math alculations：1+2、1-2、1*2、1/2、-1、-2、|1|、|2|、FFT
- Save waveform screenshot：Yes
- Export waveform images from computer：Yes
Kenneth J Ohara
Reviewed in the United States on March 8, 2025
I have not used all the features but I primarily purchased it for the O’scope and I’ve been pleased with its operation and functionality. I’m still learning it, but for the price and the size it fits my needs perfectly.
Opal
Reviewed in the United States on February 27, 2025
Don’t waste your money or time with this inaccurate device. The multimeter works well but the oscilloscope is a joke. The oscilloscope failed to lock onto signal most of the time, and when it did the reading was way off. Other reviews have mentioned to use the second probe port for more stable measurements but why should you need to do that on a two port scope? The scope is a nice concept but fails on many levels. I doubt a firmware update can fix the deficiencies in this device. Stay away.
shopper
Reviewed in the United States on February 23, 2025
It's not as powerful as pico, but if your looking for a cheap basic oscilloscope to give a picture then this is what your searching for. Also has a voltmeter and signal generator. I've been using it at my dealership for random diagnostic and it's impressive. When I don't feel like digging out pico an fighting with setup of it. This is quick and simple to use. My knowledge of using oscilloscope is still entry level, using pico can be frustrating and time consuming. Time is money on flatrate repair. No money in diag if you cannot get it done quickly. Flat rate pay sucks on todays modern highly technical vehicles, cars have changed but we are still paid from a system old as WW2 but thats a different topic. When all you need to see, is there a signal present. This product will give you that and more. Great display, bright,touch screen, auto settings, even the multimeter is auto. Great tool to add into your arsenal of diagnostic equipment
Corry
Reviewed in the United States on February 21, 2025
Overall, I was happy with the price for this unit and the screen size is bigger. I have used dual-channel scope to compare two signals and the unit seems to work well. I haven't used the analysis features as yet. Key take away is bigger screen.
Dave D
Reviewed in the United States on February 12, 2025
the ground tester broke very easily I hope i can find replacements. also ,there is a slight lag before the unit beeps when testing continuity
PB
Reviewed in the United States on September 22, 2024
I'm an electronic hobbyist, and thought I was ready for an oscilloscope, but at an entry level. Youtubing and general readings brought me to this 2C53P. This may be sold as an automotive scope, but it appears to be great for general electronic projects.Right away I easily saw everything I wanted to in the oscilloscope mode, and now the 2C53P is being used as my favorite multimeter. I now have it optioned to boot to multimeter mode.Fun to play with the signal generator to learn the oscilloscope, but I haven't really used sig gen mode. (Glad to know it's there.)Great touch screen, sturdy, not too big, a good selection of probes and a very handy carry case.For me it was a good purchase and would recommend.
Bob S
Reviewed in the United States on December 31, 2024
So this 2C53P has a lot of power packed into a nice compact package with a very nice carrying case. Overall, the Multimeter was great, the signal generator is good but measured on a calibrated frequency counter was slightly off frequency. My biggest gripe with this unit is the oscilloscope can do math functions like RMS but the value of the RMS changes drastically when the trace is repositioned vertically, always full wave on the full screen. Overall, for the price, a great unit, hopefully, a firmware update will come out and resolve the RMS issue.
Mr. Steve
Reviewed in the United States on November 9, 2024
In a time not too long ago, a dual channel osciliscope, waveform generator and multimeter would be bulky and may or may not be portable. I'm impressed. For giggles, I verified the unit based on my known bench standards and came away pleased with the results. Yes, there were some minor variations here and there, but nothing to write home about. A good tool for the bench for sure! The feel of unit seems to be built well, but may have some issues in dusty or dirty environments, a downside of touchscreens. Not sure how the unit would survive being dropped on a hard floor, I need to be careful using it in the field. The manual for the unit is a bit lacking, however, with my background and playing with it for a few minutes filled in the blanks. The only downside for me was thickness of the unit, thinner would fit in the hand better. In conclusion, overall I think it is a good value for the money and hopefully I receive many years of service. Enjoy!
Recommended Products