Flysky FS-i6X 10 Channels RC Transmitter and Receiver FS-iA10B 2.4GHz AFHDS 2A Radio Control System for FPV Drone Quadrotor, Fixed Wing, RC Car and Boat (Mode 2 Left-Hand Throttle) Black

Alaohu Flysky FS-i6X RC Transmitter and Receiver FS-iA10B

1. Hold down the OK key on the right of the screen for 2 seconds to access the menu.

2. After the transmitter Settings are modified,

please remember to hold the 'CANCH' KEY for 2 seconds to save.

.

Alaohu Flysky FS-i6X is a transmitter built for fixed-wing / glider / helicopter models.

Can also support RC Quadcopter/Car/Boat,even if these icons are not in the menu.

It features the AFHDS2A and AFHDS protocol,support for up to 10 Channels through DIY upgrades,

and is compatible with many ST**M FPV Drone RC Simulators via PS/2 to usb Cable.

[RC simulator software purchased separately]

.

The FS-I6X and FS-iA10B connect so well that you do not need to make new connections when you receive them.

In normal use, there is no need to connect the " Bind plug".

If bonding with other Receivers, you can do the following.

1. Connect the included binding cable to the receiver's B/VCC port.
2. Plug the DC 4V-6.5V power supply into other ports, the positive and negative poles cannot be wrongly connected.
3. Keep pressing the "BIND KEY", and then turn on the transmitter to enter the binding mode.
4. The transmitter will display the RX voltage, that means the binding is successful.
5. Remove binding wire, Check the operation of the servos. If something doesn't work as expected, start this process from the beginning.

Description:

Item: FS-i6X RC Transmitter

Channels: 6-10CH (Default 6ch)

Model Type: Fixed-Wing/Glider/Helicopter, Can support RC quadcopter/car/boat even if these icons are not in the menu.

RF Range: 2.408-2.475GHz

RF Power: <20dBm

RF Channel: 135

Bandwidth: 500KHz

2.4GHz System: AFHDS 2A / AFDHS

Modulation Type: GFSK

Low Voltage Warning: <4.2V

DSC port: PS/2 Port PPM

Chargeable: No

Antenna Length: 1.02inch 26mm (Dual Antenna)

Weight: 13.83oz 392g

Power: 6V DC,4 * AA battery (NOT included)

Display: STNTransflective Display, LCD 128x64 Lattice,

VA 73x39mm, LCD with white backlight

Size: 6.85*3.5*7.48inch 174*89*190mm

On-line Update: Yes [Upgrade cable purchased separately]

Color: Black

Certificate: CE0678, FCC ID: N4ZFLYSKYI6X

Joystick mode: mode 2 [ left hand throttle, push the left joystick up and down,

will not automatically rebound to the center ]

FS-iA10B Specifications:

Item: FS-iA10B Receiver

Channels: PWM 10CH/ PPM 8CH s.bus 10CH / i.bus 10CH

(Select from transmitter menu 'SYSTEN-RX setup-Outprt mode')

2.4GHz System: AFHDS 2A

Model Type: Fixed-Wing/Glider/Helicopter/Quadcopter/Car/Boat

RF Range: 2.4055-2.475GHz

RF Receiver Sensitivity: -105dBm

Bandwidth: 500KHz

Modulation Type: GFSK

Power: 4.2-6.5V DC

Antenna Length:1.02inch 26mm (Dual Antenna).

Antenna Total length:150mm*2

Weight: 0.68oz 19.3g

Size: 1.99*1.37*0.59inch 50.6*34.9*14.9mm

i-BUS Port: Yes

Data Acquisition Port: Yes

Color: Black

Certificate: CE,FCC

.

PS/2 to usb Cable

Line length：59 inch 1.5meters

Use: The PS/2 to usb Cable is available for FS-i6X transmitters to connect computer firmware upgrades

and FPV Drone Simulators to connect.

[RC simulator software purchased separately]

Package Included:

• FS-i6X Transmitter *1
• FS-iA10B Receiver *1
• Bind Cable *1
• PS/2 to usb Cable *1

Delivery without batteries

How to setup 10 Channels?

Radio Transmitters FS-I6X open 10 channel method：

Long press the OK key for 2 seconds to enter the menu setting,

Select System setup to enter,

Press down to the last item Aux SWitches auxiliary switch setting to enter,

SwA SwB SwC SwD is set to select On to turn on

Ch6, changed to Ch10

Long press the CANCH key to automatically save and exit.