Your cart is empty.
Your cart is empty.Quickly and conveniently take accurate humidity and temperature readings with the Fluke 971.The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. With a rugged holster and protected sensor, the Fluke 971 is built to perform and made to last. Backlit dual display of humidity and temperature. Measures dew point and wet bulb temperatures. 99 record storage capacity. Ergonomic design with belt clip and protective holster. Quick-response capacitance sensor. Compact and lightweight. Temperature range from -20 to 60 degree C. 0 to 45 degree C is +/-0.5 degree C and -20 to 0 degree C and 45 to 60 degree C +/- 1.0 degree C. Relative humidity from 5 to 95 percent. Min/Max/Avg Data hold. Low battery indicator. 5 to 95 percent RH relative humidity range. Measures 60mm width by 194mm height by 34mm depth. 4 AAA alkaline battery.
Customer
Reviewed in the United States on September 24, 2024
Have used Fluke test equipment for many years and won't buy anything else
Konstantin Kozarov
Reviewed in Canada on August 17, 2024
I bought this for a client who needed a brand and I thought that'sthe one. It do a good job, but I have mine looking almost the same way costs 60$ and when I compare them they read the same values. So...🤔
RFarter13
Reviewed in the United States on May 22, 2024
I've used one of these in my last job and the unit is excellent. In my previous position, I used it to verify temps and RH in a cold storage facility.I now use it to confirm CRAC units in data centers, MDF and IDF cabinets/rooms.It's perfect for helping you determine if you have a bad sensor in the system. Worth every penny.The only real negative is the cover for the sensor. It is plastic and must be handled with care. In other words, don't DROP it.
Binu M.
Reviewed in the United States on March 12, 2024
Equipment is Good but no calibration certificate available with online order
JOSEANTUA
Reviewed in the United States on April 3, 2023
Buen Instrumento
Thomas M Farone
Reviewed in the United States on June 30, 2022
Doing HVAC commissioning is easier with this meter, great to calculate dew point, RH, and Temp!
WEB
Reviewed in the United States on April 15, 2021
Works well. The accuracy is within about 2% RH when compared to atmospheres with known RH. The instrument is very sensitive and rapidly changes even if you breath too near the sensor. The instrument seems to have been changed from the original 971. There is no sensor shutter on the newer 971. In some ways this change is better since forgetting to open the shutter will still give you a reading but there is not much chance this reading will be right. I keep my 971 rolled up in a small plastic bag to help protect the sensor. The instrument comes with batteries installed. The batteries seem to be of good quality. All-in-all, this instrument more than reliable enough for HVAC work.
Troy
Reviewed in Canada on February 26, 2019
Works well, quick delivery!
Alan
Reviewed in the United States on July 19, 2018
Fluke is the best product on the market, if fluke makes it and I need it, I’ll buy it.
J.A
Reviewed in the United Kingdom on March 8, 2018
I have to say, I'm a bit disappointed with Fluke on this particutlar instrument. I understand it's sensative and is supposed to react fast to temperature & humidity levels but oh my god, it's way too sensative! It seems all the cheaper chinese models (although they are not as sensative) but they do eventually stabilize and give you an actual reading. The Fluke 971 continues to fluctuate up and down and getting a stabilized reading seems impossible. You don't know what to believe with it!You have to leave it sitting idle for atleast 5 minutes before it slows down as it get's closer to the actual temerature, sometimes it can take up to 15 minutes depending on how extreme the temperature & conditions where when it was used before. It does eventually give you the actual room temperature but trying to get a temerature reading from anything else seems almost impossible.
Cliente
Reviewed in Spain on January 14, 2018
Excelente Producto especialmente por la poca desviación en la calibración del instrumento.Se aplica mucho en la Preservacion de las Tuberia durante el PreComisionado.
Customer
Reviewed in Canada on February 23, 2017
Works great, the only problem we have is the unit we received is missing the cap to cover the sensor for when it is not in use.
Ziv r.
Reviewed in the United States on December 8, 2015
It's a high quality product,easy to use,has a fast response time,and reacts quickly to temperature or umidity changes.its comfortable to hold in the hand ,and it's rubset.has low weight too.its a must tool for the hvac tecnition.
Recommended Products
