Your cart is empty.
Your cart is empty.Product Description
Fireplace remote control and receiver with AUTO Thermostat Function
• It can Direct replacement for SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
• The system can be thermostatically or manually turned on and off with the transmitter
• This remote control system is designed for use with a millivolt or 24V gas valve system.
• Includes remote, receiver, wall plate, and wiring to connect receiver to valve
Attention: This does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase.
FEATURES/SPECIFICATIONS :
• Easy Access Thermostatic Control
• Battery Powered Transmitter and Receiver
• Low battery Indication
• Child Proof Lock-out
• 16 Security Codes
• Quick Disconnect Wiring Assembly
This Kit Does Not Include The Batteries
High-quality Kit
RECEIVER
• This kit comes with an 22 inch wire assembly.
• Insert the white terminal to the back of the receiver , Do not force the terminal plug onto the receiver, connect the two terminals to the TH and TH/TP terminals of the millivolt valve, install the batteries and you're ready to go.
• DIP switches on the transmitter and the receiver must have the same position on both in order for the system to work , if not matched the transmitter will not work, check the photos to find the place of the dip switches on both.
REMOTE
• This wireless thermostatic on/off/ remote control system provides a safe, reliable, and user friendly remote control for millivolt valve gas appliances.
• The system can be thermostatically or manually turned on and off with the transmitter
• Remote Control has two (2) operating modes: Manual and Thermostatic. The control system can be set to temperature ranges between 45°F and 90°F.
• The reset button can be used to reset the transmitter if transmitter is not working properly. The reset button is located behind the battery door cover. Using a paper clip, press the reset button for 5 seconds until the blue lcd screen shows the temperature display .
IMPORTANT INFORMATION
• Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp current.
• This remote control system requires (3) “AAA” and four (4) “AA” batteries to power the transmitter and receiver.
• Do not short (or jumper) across the gas valve terminals to test the remote control installation
LEARNING TRANSMITTER TO RECEIVER
1.The transmitter privacy (DIP) Switches are preset at the factory. Setting the 4 DIP Switches on transmitter and receiver on the same position.
2.Put the receiver slide switch into RS mode , then press the On or Off button from the remote ,the receiver should indicate a red flashing light , that means transmitter is connected with receiver, if not make sure that the dip switches are in the same position and matched on both transmitter and the receiver.
Our products are well inspected from the factory, and the temperature error is usually within 1-2 degrees .
RICHARD
Reviewed in the United States on March 18, 2024
perfect replacement for my existing logs
MB
Reviewed in the United States on February 25, 2024
I've long felt that having remote functionality added to my fireplace was something I needed to do. This came across my feed, and I took a leap. I love it! Installation was simple, but I took a roundabout way to get to the simple way of doing it.I first tried to replace my wall switch with the included box. My first issue was that the white cover for the switch didn't fit properly, and needed to be trimmed a little around the physical switch. Once installed, it all worked great, but the look of the switch with its battery door wasn't winning any trophies for appearance.I next took the remote control box out of the wall, returned my original switch to the wall, and instead wired this into the fireplace itself. This was much easier, as I just had to remove the wires going to the switch from the control box and wire this remote controller into the fireplace. I was a little concerned that the metal surround for the fireplace and accompanying metal face would create some issue with the RF signal getting through. I'm happy to report that there's no issues.With this setup I can still use the original wall switch to turn on or off the fireplace as well as use the remote. The remote's on/off function is easy, super handy, and has no range issues in my living area. The thermostat function works well too, but isn't something we use a lot.
42
Reviewed in the United States on February 23, 2024
I just connected this remote control kit to my Jotul Sebago propane stove. The electrical installation is simple; just push the female disconnects onto the terminals marked "TH" and "TH/TP", plug the other end of the cable into the back of the receiver box and add batteries (NOT supplied) to the receiver and the remote transmitter. Now you have a fireplace remote!This kit is about one third of the cost of name brand kits and functions exactly the same. It comes with both black and white faceplates and battery compartment covers for use if you are able to put it in a receptacle box in the wall - a good thing to set up in advance in new construction. In my case I fabricated a bracket from a couple of angle brackets and hung it under the stove.The tiniest of nitpicks is that I'd like to replicate this on my Flipper Zero as I've done with several other single purpose remotes. It does not appear to be infrared as it still controls the stove even with it held under a blanket. I cannot get the Flipper Zero to register it on the sub-GHz app. Perhaps it uses a different frequency range than most other remotes do.
Ricky C
Reviewed in the United States on October 31, 2024
It replaces older identical units in my gas logs and works as good or better than originals
Recommended Products