Shopping Cart

Your cart is empty.

Your cart is empty.

FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application

Free shipping on orders over $29.99

$29.99

$ 13 .99 $13.99

In Stock

About this item

  • Appearance: Amber
  • Cure Type: Heat cure or Room Temperature
  • Benefits: Low viscosity easily mixed effective electrical insulator low permeability to gasses and vapors
  • Mix Ratio by weight: 100:100 / Resin: Hardener
  • Typical Applications: FDA Grade Applications, food packaging, indirect contact with food and medical applications


Mix Ratio by weight: 100:100 / Resin: Hardener Typical Applications: FDA Grade Applications, food packaging, indirect contact with food and medical applications Viscosity @ 25 C, cps: 1,500 (After Mixing)@ temperature 77.0 F, 25.0 C Thixotropic Index: 1.0 Specific Gravity, mixed: 1.11 Reactive solids contents, %: 100 Pot Life: 45 minutes 4 Hours: @ 65C 24 Hours: @ 25C Hardness, Shore D: 65 Dielectric strength volts/mil: 410 Volume Resistivity: 1.00e+14 ohm-cm Dielectric Constant: 3.35 @ frequency 1000 Hz Operating Temperature: -70 to 145 C CTE, linear: 29.4 in/in-F @ temperature 68.0 F FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.This epoxy can be supplied in various different packages.


carlo
Reviewed in the United States on May 1, 2024
Did not work
Yusmary Gomez Muñoz
Reviewed in the United States on November 10, 2024
Dice ser un a desvivo y nunca cumplió su función solo se pudo pegsjosa